Abstract:Converting industrial wastes into value-added building products in an environmental management strategy is a challenging yet vital component of the industrial process. Steel slag (SS), an industrial waste by-product from the steel-making process, is typically disposed of in landfill which consumes land resources and pollutes the environment. This paper explores the possibility of a closed-loop system to convert steel slag into a cement material through carbonation activation, thereby significantly reducing the amount of steel slag waste sent to landfills across Canada. The production of this cementing material can occur next to the steel mill, utilizing steel slag and carbon dioxide collected on-site to fabricate carbon-negative products. To save energy and allow production to be feasible on an industrial scale, ambient pressure (AP) carbonation is developed to reduce carbon emissions while improving their performance. High pressure (HP) carbonation curing and normal hydration (NH) references were also implemented at the same time to justify the application of AP carbonation in reducing CO2 emission. The results of this study found AP carbonation-activated SS compacts have comparable CO2 uptake (about 7.5 tons CO2/100 tons slag) and mechanically compressive strength values as those subjected to HP carbonation, suggesting that AP could be used to replace HP in carbonation curing to ensure a lower energy input. Additionally, AP seemed to possess as effective carbonation as HP. The studies investigated by multiple techniques including X-ray diffractometer (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopic analysis, and scanning electron microscopy (SEM) aim to identify the microstructure development of carbonated SS paste to assess carbonation results. Developed with life cycle assessment (LCA), environmental impact evaluation shows that AP presents a smaller global warming potential (GWP) value than HP. The comparable CO2 sequestration, satisfactory engineering properties, enhanced microstructure and lesser environmental impact in AP carbonation confirm the feasibility of replacing high pressure with extremely low pressure to cure concrete products. The use of AP carbonation for cement material created using steel slag reduces carbon emissions, energy usage, and natural resource consumption.

Use of steel slag as carbonation material: A review of carbonation methods and evaluation, environmental factors and carbon conversion process

Evaluation of Potential Factors Affecting Steel Slag Carbonation

Accelerated carbonation of steel slag: A review of methods, mechanisms and influencing factors

A Review on the Carbonation of Steel Slag: Properties, Mechanism, and Application

Utilization of accelerated carbonation to enhance the application of steel slag: a review

Carbonation of steelmaking slag presents an opportunity for carbon neutral: A review

Accelerated Carbonation of Steel Slag and Their Valorisation in Cement Products: A Review

A review of use of metallurgical slag for its carbonation products: processes, crystallization behavior, and application status

Use of steel slag as sustainable construction materials: A review of accelerated carbonation treatment

Environmental benefit assessment of steel slag utilization and carbonation: A systematic review

Carbon dioxide sequestration through steel slag carbonation: Review of mechanisms, process parameters, and cleaner upcycling pathways

Carbon capture and storage technology by steel-making slags: Recent progress and future challenges

Research status and future challenge for CO2 sequestration by mineral carbonation strategy using iron and steel slag

Carbon Dioxide Reduction Through Mineral Carbonation by Steel Slag

A thorough assessment of mineral carbonation of steel slag and refractory waste

Effect of Carbonation Treatment on the Properties of Steel Slag Aggregate

Direct Gas-Solid Carbonation Kinetics of Steel Slag and the Contribution to in Situ Sequestration of Flue Gas CO(2) in Steel-Making Plants.

A review on steel slag valorisation via mineral carbonation

Converting industrial waste into a value-added cement material through ambient pressure carbonation

An efficient molten steel slag gas quenching process: Integrating carbon solidification and waste heat recovery

Evaluation of the Carbon Sequestration Potential of Steel Slag in China Based on Theoretical and Experimental Labile Ca