Abstract:Journal of Composite Materials, Ahead of Print. Post-curing cycles have an effective impact on the thermal and mechanical properties of thermoset composite materials. Typically, post-cure cycles use heat to expose cured resin parts to high temperatures in an attempt to maximize their final properties. In most cases, these processes allow composite parts to achieve the highest possible strength and become stable. In industrial practice, however, it has been found that there are potential consequences of performing localized repairs on composite parts in an autoclave where the localized repair undergoes a normal curing process while the parent part undergoes an additional curing process. Thus, for the parent part, prolonged exposure to high temperatures can trigger a process of decomposition of the resin matrix, as could be the aging phenomena of composites in service. In such a scenario, two practical questions are worth asking: (1) to what extent can a resin matrix be post cured without risking degrading its thermal properties? (2) what are the residual mechanical and physical properties resulting from prolonged exposure of composite parts to elevated temperatures? In this work, an analysis was carried out to estimate the potential adverse effects on thermoset composite parts made of carbon fibre and epoxy resin materials commonly used in aerospace, in terms of thermal, physical and mechanical properties after a long exposure to high temperatures caused by multiple post cure cycles. Two types of prepreg laminates were used to make monolithic test panels using twill and plain weave architectures for the M21 and 8552 test panels respectively. Thermal tests were conducted to evaluate the evolution of the degree of cure, the glass transition temperature and the inter-laminar shear strength of post-cured panels, which were subjected to a different number of post cure cycles. The study found that multiple post cure cycles alter thermal properties, which in turn have adverse effects on physical and mechanical properties. The results demonstrated that the two types of composite materials respond differently to changes in properties. Twill weave panels quickly reach full cure after three stages while plain weave panels have undergone gradual curing. This difference in the curing process of the resin matrix clearly influenced the changes in the measurements of shear, surface hardness and compressive strengths.

A review of the curing rate and mechanical properties of epoxy resin on polymer matrix composites

Review of Matrix Solidification and Forming Processes of Composite Materials

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Influence of Epoxy Resin Curing Kinetics on the Mechanical Properties of Carbon Fiber Composites

The curing kinetics and mechanical properties of epoxy resin composites reinforced by PEEK microparticles

Rapid curing epoxy resin and the properties of carbon fiber/epoxy composite

Realizing the Curing of Polymer Composite Materials by Using Electrical Resistance Heating: A Review

Research on curing kinetics of multiaxial warp‐knitted composites

Impact of different matrix systems on mechanical, thermal, and electrical properties of carbon fiber reinforced epoxy resin matrix composites

Study on the process of EB curing epoxy matrix composites

Cure Kinetics of Epoxy Resin Used for Advanced Composites

Study on the Curing Behavior of Polythiol/phenolic/epoxy Resin and the Mechanical and Thermal Properties of the Composites

Study on the heating mechanism and macro/micro properties of composite materials under microwave curing

Degree of Cure, Microstructures, and Properties of Carbon/Epoxy Composites Processed via Frontal Polymerization

The epoxy resin system: function and role of curing agents

Synthesis and application of epoxy resins: A review

Using thermokinetic methods to enhance properties of epoxy resins with amino acids as biobased curing agents by achieving full crosslinking

Interface Controlled Micro- and Macro-Mechanical Properties of Vibration Processed Carbon Fiber/Epoxy Composites

Influence of fly ash on the curing characteristics of an epoxy resin

Effects of multiple post cure cycles on properties of composite carbon fibre and epoxy materials

INFLUENCE OF CARBON FIBER IN EPOXY RESIN CURING