Abstract:In this work, the most efficient and common engineered surface treatments identified as shot peening (SP), laser shock peening (LSP) and ultrasonic surface rolling process (USRP) were utilized to impact the 300 M ultrahigh strength steel. The microstructure evolution and surface strengthening behavior were carefully characterized and compared for the 300 M steel with various treatments. Besides, the underlying mechanisms for difference in grain refinement and surface mechanical properties by the arranged surface modification are revealed. The results indicate that a gradient structure with nano-grains at the top surface appears on the SP, LSP and USRP treated samples. The process of repeated impacts of SP in different directions leads to activation of multiple slip systems, which thus causes severe refined grains and dense dislocation activities associated with dislocation tangles, dislocation walls and blocking. A great variety of strikes per unit area by USRP results in higher plastic deformation compared to SP where numerous dislocation cells and deformation bands were generated. In contrast to SP and USRP, fewer slip systems are activated in LSP due to the short duration time which thus leads to the thinnest refined grain layer and more planar dislocation structures. The combination of low plastic work and lack of refined grains leads to lowest full width at half maximum (FWHM) in case of LSP samples whereas high FWHM comes from both fine grain size and dislocations in SP. The grain refinement and plastic work contributes to an increase of microhardness and compressive residual stress for the SP, LSP and USRP samples. To be clear, SP leads to a higher magnitude of hardness and compressive residual stress on the topmost surface while LSP causes a larger depth due to that shock wave in LSP influences material to much greater depth. Besides, the decomposition and redistribution of carbides are also noticed on the surface layer after the surface treatments with very high strain rate where numerous dislocations accumulate at the border of the carbides and slip trace is also observed within the carbides.

Effect of supersonic fine particle bombardment on the surface integrity and wear performance of DZ2 axle steel

Effect of multiple ultrasonic nanocrystal surface modification on surface integrity and wear property of DZ2 axle steel

Improvement in the tribological behaviour of surface-nanocrystallised 304 stainless steel through supersonic fine particle bombardment

Effect of supersonic fine particle bombardment on microstructure evolution and tribological properties of GCr15SiMn bearing steel

Mechanical properties and microstructure of the heterogeneous DZ2 axle steel under high-strain-rate compression at ambient temperature

Surface nanocrystallized structural steel with enhanced tribological properties under different sliding conditions

Investigation on Microstructure and Fretting Wear Properties of GCr15 Bearing Steel Modified by Fine Particle Bombardment

Effect of surface nano-crystallization induced by supersonic fine particles bombarding on microstructure and mechanical properties of 300M steel

Effects of supersonic fine particle bombardment on the microstructure and corrosion properties of Ti-6Al-3Nb-2Zr-1Mo alloy

Influence of Laser Shock Peening on Fatigue Performance of LZ50 Axle Steel for Railway Wheel Set

Effect of ultrasonic rolled material layer on the corrosion fatigue resistance of railway axle EA4T alloy steel

Enhancement of Fatigue Endurance Limit through Ultrasonic Surface Rolling Processing in EA4T Axle Steel

Tribological Behaviors of Steel Surfaces Treated with Ion Sulphurization Duplex Processes

Temperature Effect on Microstructure Evolution and Mechanical Properties of Fe–28Mn–8Al–1C Lightweight Steel via Supersonic Fine Particle Bombardment

Microstructure evolution and surface strengthening behavior of 300 M ultrahigh strength steel under engineered surface treatments

Effect of ultrasonic surface rolling process by disparate static pressure on a carburized layer of 17CrNiMo6 steel

Excellent Wear Resistance of a High-Speed Train Brake Disc Steel with High Hardening Ratcheting Strain Zone

Fatigue life enhancement of foreign object impacted railway axle EA4T steel with surface shot peening

Fretting wear behavior of different surface modified layers of a tight fit spline used for a gauge-changeable railway vehicle

Instrumented oscillographic study on impact toughness of an axle steel DZ2 with different tempering temperatures

Microstructure and tribological performances of M50 bearing steel processed by ultrasonic surface rolling