Abstract:Steel used in the automotive industry must strike a delicate balance between strength and ductility to maintain the structural integrity of vehicles and achieve intricate designs. Traditional methods of reducing weight by using high-strength low-carbon steels have limitations. As a result, a new dual-phase lightweight steel with an austenite-ferrite structure and the composition Fe-0.52C-11Mn-5.14Al-1Cr was developed. The relationship between the microstructure and mechanical properties of this lightweight steel, which underwent various annealing processes (700°C-1000°C) after cold rolling, was examined using specialized equipment like a universal testing machine, electron microscopy, and X-ray diffractometer. The findings reveal that the cold-rolled test steel (CR) exhibits high tensile strength (1500 MPa) but low elongation at break (3.9%). The performance of the experimental steel post-annealing treatment has shown significant improvement, with the average grain size increasing with higher annealing temperatures. The γ phase generally shows an increasing trend, with finer grains post-annealing, and the distribution of the α phase displays a consistent pattern along γ boundaries. Additionally, a substantial number of annealing twins appear in the matrix. These twin boundaries absorb some dislocations, and slip leads to the movement of twin boundaries, effectively reducing stress concentration from deformation and enhancing the ability of twin boundaries to accommodate plastic strain, creating twin dislocation interaction. The interplay among dislocations, stacking faults, and twins regulates the balance between strength and plasticity. Following treatment at 850°C × 1 min + 500°C × 3 min, the steel displays excellent mechanical properties, including ultimate tensile strength (836 MPa), elongation (53%), and strength-ductility product (43723 MPa·%). This study identifies a specific heat treatment parameter that achieves a harmonious equilibrium between outstanding strength and plasticity (strength-ductility product) within the designed composition.

Temperature Effect on Microstructure Evolution and Mechanical Properties of Fe–28Mn–8Al–1C Lightweight Steel via Supersonic Fine Particle Bombardment

Effect of surface nano-crystallization induced by supersonic fine particles bombarding on microstructure and mechanical properties of 300M steel

Effect of supersonic fine particle bombardment on microstructure evolution and tribological properties of GCr15SiMn bearing steel

Tailoring the Microstructure to Enhance the Cryogenic Mechanical Properties of a Fe–34.5mn–0.04c Steel

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Improvement in the tribological behaviour of surface-nanocrystallised 304 stainless steel through supersonic fine particle bombardment

Surface nanocrystallized structural steel with enhanced tribological properties under different sliding conditions

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Temperature dependence of the deformation behavior and mechanical properties of a Fe–Mn–Al–C low-density steel for cryogenic application

Investigation on Microstructure and Fretting Wear Properties of GCr15 Bearing Steel Modified by Fine Particle Bombardment

Molecular dynamics simulation of the effect of supersonic fine particle bombardment on the mechanical behaviour of γ-TiAl alloy: The effect of grain size

Impact toughness and fracture behaviour of a lamellar structural Fe–Mn–Al–C cryogenic steel

The Impact of Interphase Precipitation on the Mechanical Behavior of Fire-Resistant Steels at an Elevated Temperature

Effect of Cold Rolling and Cryogenic Treatment on the Microstructure and Mechanical Properties of Fe–32Ni Alloy

Atomic simulation of the effect of supersonic fine particle bombardment process parameters on the mechanical properties of polycrystalline γ-TiAl alloy

Improving impact toughness of Fe–20Mn–9Al-1.5C–2Ni–3Cr low-density steel by optimizing grain boundaries via multi-stage heat treatment without compromising high strength and ductility

The influence of annealing temperature on the microstructure and mechanical properties of Fe-0.52C-11Mn-5.14Al-1Cr lightweight Steel

Effect mechanism of cryogenic treatment on ferroalloy and nonferrous alloy and their weldments: A review

Effect of Intragranular Κ Carbides and Intergranular Precipitates on the Hot Deformation Mechanism and Dynamic Recrystallization Mechanism of Fe–28Mn–11Al–1.5C–5Cr Lightweight Steel

Elucidating the role of secondary cryogenic treatment on mechanical properties of a martensitic ultra-high strength stainless steel

Mechanical Properties and Formation Mechanism of Surface Hard Nanocrystalline Carbon Diffusion Layer on 18Cr2Ni4WA Steel Induced by Supersonic Fine Particle Bombarding