Abstract:This study presents an adaptive algorithm for distance relays. In this algorithm, the network connected to the transmission line terminals are modelled using an equivalent circuit, and the impedances of this equivalent circuit are estimated. By employing this algorithm, relay errors (over/under reach) caused by changes in network structure, the presence of fault resistance, and injected current from the remote end of the transmission line are eliminated. As a result, the relay accurately determines fault location and fault resistance, enhancing the performance of its Zone1 and Zone2 functions. Faults in power systems occur for various reasons, such as aging or natural disasters. Detecting, locating, and promptly clearing these faults is crucial for maintaining the safety and reliability of transmission lines (TLs). Distance relays (DRs), which protect TLs, detect faults, estimate their location, and send the required commands. However, these relays may experience mis‐detection due to manipulated impedance arising from both internal and external factors. These factors include measurement device errors, network topology changes, the presence of fault resistance (FR), and injected currents from remote line terminals. To address this challenge, an innovative adaptive protection scheme that considers FR, changes in network topology, and injected current from the opposite end of the line is proposed. By estimating the equivalent circuit impedances (ECIs) of the network connected to the terminal of the TL, this protection scheme utilizes impedance estimation techniques at the line terminals and offline network information. Simulation studies (tested on the IEEE 39‐bus standard network) show that the proposed scheme accurately estimates fault location (FL) and FR with high precision. The simulation results demonstrate its effectiveness in improving the performance of conventional distance protection relays in both the first and second protection zones (Zone1 and Zone2 ).

Performance of Distance Relays in Presence of IPFC

An adaptive distance protection scheme considering fault resistance, injected current, and structural changes in the power system

Performance analysis of multiphase compensated distance relay in single-phase-to-ground fault with power swing

Effective protection scheme for transmission lines connected to large scale photovoltaic power plants

Distance Protection That Insensitive to Power Swing

New Type Adaptive Distance Relay with Improved Performance

The performance comparison of artificial intelligence based distance relays for the protection of transmission lines

Improved Setting Method of Distance Protection with the SSFCL

Adaptive Distance Relay for Preventing Error Action of Reactive Fault

Real-Time Modeling and Testing of Distance Protection Relay Based on IEC 61850 Protocol

A Hybrid Intelligent System for Protection of Transmission Lines Connected to PV Farms based on Linear Trends

The Influence of Fixed Series Capacitor on Distance Protection Using Relay Models

NOISE EVALUATION BASED ADAPTIVE FAST DISTANCE RELAY PROTECTION

Adaptive Distance Protection Based on the Analytical Model of Additional Impedance for Inverter-Interfaced Renewable Power Plants During Asymmetrical Faults

Error Analysis of Distance Relay Protection in Phase-to-Phase Short Circuit Fault

Fast distance protection based on real-time estimation of transient main frequency

Damping Performance Analysis of IPFC and UPFC Controllers Using Validated Small-Signal Models

An Integrated Protection Scheme Based On A Distance Approach

Integrated Protection Scheme for Power Line

On the Performance of DF-based Power-Line/Visible-Light Communication Systems