Abstract:This study examined the hard turning of AISI D2 cold work tool steel subjected to deep cryogenic processing and tempering and investigated the effects on surface roughness and tool wear. In addition, the effects of the deep cryogenic processes on mechanical properties (macro and micro hardness) and microstructure were investigated. Three groups of test samples were evaluated: conventional heat treatment (CHT), deep cryogenic treatment (DCT-36) and deep cryogenic treatment with tempering (DCTT-36). The samples in the first group were subjected to only CHT to 62 HRc hardness. The second group (DCT-36) underwent processing for 36 h at −145 °C after conventional heat treatment. The latter group (DCTT-36) had been subjected to both conventional heat treatment and deep cryogenic treatment followed by 2 h of tempering at 200 °C. In the experiments, Al2O3 + TiC matrix-based untreated mixed alumina ceramic (AB30) and Al2O3 + TiC matrix-based TiN-coated ceramic (AB2010) cutting tools were used. The artificial intelligence method known as artificial neural networks (ANNs) was used to estimate the surface roughness based on cutting speed, cutting tool, workpiece, depth of cut and feed rate. For the artificial neural network modeling, the standard back-propagation algorithm was found to be the optimum choice for training the model. Three different cutting speeds (50, 100 and 150 m/min), three different feed rates (0.08, 0.16 and 0.24 mm/rev) and three different cutting depths (0.25, 0.50 and 0.75 mm) were selected. Tool wear experiments were carried out at a cutting speed of 150 m/min, a feed rate of 0.08 mm/rev and a cutting depth of 0.6 mm. As a result of the experiments, the best results for both surface roughness and tool wear were obtained with the DCTT-36 sample. When cutting tools were compared, the best results for surface roughness and tool wear were obtained with the coated ceramic tool (AB2010). The macroscopic and micro hardness values were highest for the DCT-36. From the microstructural point of view, the DCTT-36 sample showed the best results with homogeneous and thinner secondary carbide formations.

Effect of Deep Cryogenic Treatment on Machinability and Corrosion Resistance of Titanium Grade 2 Alloy Using Electrical Discharge Machining Process

Experimental Study on Parametric Effect of Wire Electric Discharge Machining of Titanium Grade 2 Alloy Using Cryogenic Treated Wire

The Influence of Deep Cryogenic Treatment (DCT) on the Microstructure Evolution and Mechanical Properties of TC4 Titanium Alloy

Effects of deep cryogenic treatment on machinability, hardness and microstructure in dry turning process of tempered steels

Effect of deep cryogenic processing cycles on surface roughness, dimensional stability and microstructure of high carbon high chromium tool steel for cutting tool and dies applications

Effect of machinability, microstructure and hardness of deep cryogenic treatment in hard turning of AISI D2 steel with ceramic cutting

Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Tribological Behavior of D2 Steel

Effect of Deep Cryogenic Treatment on the Mechanical Properties and Defect Tolerance of Selective-Laser-Melted 316L Stainless Steel

Influence of Deep Cryogenic Treatment on the Mechanical Properties of AISI 440C Bearing Steel

Performance Analysis of TiAlSiN Coated Tungsten Carbide End Milling Tool Subjected to Shallow and Deep Cryogenic Treatments

A study on Electrical Discharge Machining of Titanium Grade2 with experimental and theoretical analysis

Effects of deep cryogenic treatment on static mechanical properties of 18NiCrMo5 carburized steel

Enhancing the Wear Resistance of 100Cr6 Bearing Steel Using Cryogenic Treatment

Optimization of deep cryogenic treatment conditions for the wear rate of UNS R56400 (Ti6Al4V) medical titanium alloy using Taguchi’s method

Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel

Effect of Deep Cryogenic Treatment on Wear Behavior of Cold Work Tool Steel

Effect of Deep Cryogenic Treatment on Wear Resistance of AISI 52100 Bearing Steel

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100 Cr6 Bearing Steel

Effect of Wire Electric Discharge Machining Parameters on Material Removal Rate in Machining of Titanium Grade 7 Alloy