C80 concrete with high intensity and performance

Wang Shu-ping

Abstract:C80 concrete with high intensity and strong performance was researched and developed through using Taizhou local materials.It is successful to project and fill in a gap of blank on high intensity and strong performance's concrete at Taizhou area.The gap of concrete technology development between Taizhou area and domestic is shorten.

Engineering,Materials Science

What problem does this paper attempt to address?

Characteristics and Application of C80 High Performance Concrete

Zhang Shande,Shi Kebin,Yu Wei

DOI: https://doi.org/10.3969/j.issn.1005-8249.2011.02.011

2011-01-01

Abstract:In order to treat large area of cracking of high-performance concrete,this paper studied the working characteristics of C80 high-performance concrete by mixture experiment,and gained the mixture proportion which satisfied the request of engineering design and construction technique,and applied in the reconstruction of Young ditch of Hutubi-river.The study indicated that the excellent working characteristics of C80 concrete were the key to the quality of the steep bottom of pouring gate,and admixture dosages with high quality were very important to optimize working characteristic,debase heat of hydration,prevent crevice,and enhance the lasting quality and mechanical property of C80 high-performance concret.
Application Research of C80 High-Performance Concrete for the Guangzhou East Tower

Yi Dong,Nai Qian Feng,Hao Wen Ye,Hu Yan Ling,Li Xun Lin,Li Bin Xu,Hui Sun

DOI: https://doi.org/10.4028/www.scientific.net/amm.584-586.1635

2014-01-01

Applied Mechanics and Materials

Abstract:With the development of modern building design and construction technology, high strength concrete technology were getting more use in engineering and more requirements. The authors produced C80 HPC by using Portland cement, blast furnace slag, micro bead and Flyash as cementitious material, have prepared the concrete with grade of C80, low pumping resistance (rewinding time less than 6s), low shrink (72h early self-shrinkage value at 0.028%), high workability (slumps over 240mm and divergence over 700mm) and high durability (diffusion coefficient in concrete after 28d was 1.35×10-12 m2/s), which would match the requirements of the Guangzhou East Tower.
New Development of Concrete Technology——Multifunctional High Performance Concrete

Feng Naiqian,Ye Haowen,Lin Zhonglong,Yang Wei,Sun Hui,Qin Shanzong

DOI: https://doi.org/10.7672/sgjs2013040006

2013-01-01

Abstract:Combining with the project actual demands,a multifunctional high performance concrete is invented to change the concrete construction process,and the aim of long construction life,energy-saving,low carbon,environmental protection for high performance concrete is achieved finally.The characteristics of high performance concrete is introduced.The cracking problem of the shear walls with C80 concrete is researched with the project of Guangzhou East Tower.The mix proportion of high performance concrete is optimized.A serial tests are researched from the performance of new pouring concrete,compressive strength,early shrinkage and autogenous shrinkage,temperature rise of hydration,maintenance conditions.Then the good characteristics of high performance concrete are obtained.
Preparation of C80~C100 High Performance Concrete and the Ultrahigh Pumping Technology

li bin xu,nai qian feng,ideris zakaria,bin xing wu

DOI: https://doi.org/10.4028/www.scientific.net/AMR.919-921.1830

2014-01-01

Abstract:The high strength and high performance concrete C80 similar to C100 is popularly used nowadays, especially in the West-Tower Project of Gungzhou. In order to provide reference for the use of high strength concrete and the development of ultrahigh pumping technology, the following six aspects were studied, namely the preparation of high strength concrete, the variation of the concrete mixture under high pressure, the index of the ultrahigh pumping concrete, the change after the pumping, the loss of the pumping pressure and the measurement of the pumping viscous resistance.
Mix Design and Engineering Application of C80 High-Performance Silicon Fume Concrete

Shande ZHANG,Kebin SHI,Wei YU,Nuerkaili·Yiziteliopu

2011-01-01

Abstract:In order to solve the cracking problem of large area of high-performance concrete especially in the floor of sluice,this paper studied the working characteristics of C80 high-performance concrete by mixture trail,and then gained the mixture proportion which satisfied the request of engineering design and construction technics,and successfully applied in the head of young ditch of Hutubi-river reconstruction engineering.The study indicates that the excellent working characteristic of C80 high-performance concrete is the key to the quality of the Steep bottom of pour gate,and admixture dosage with high quality plays a very important role in optimizing working characteristic,debasing heat of hydration,preventing crevice,and enhancing durability and mechanical property of C80 high-performance.
Development and Engineering application of C70 steel pipe High Strength and High Performance Concrete

Wei Li

2003-01-01

Abstract:In this paper,based on engineering practices,the development and application of C70 steel pipe highstrength highperformance concrete are introduced,which utilizes 550kg/m\+3 cement that is a general purpose engineering material.Through comparison tests,the mixture ratio of main materials is decided.It can meet the construction requirements of highstrength,excellent flow property and pump delivery,which can achieve remarkable technical results and economic benefits.
Experimental Study On Permeability And Chloride Resistance Properties Of Concrete In Yu-Cheng Bridge

Tao Fan,Jianfeng Dong,Yuxi Zhao

DOI: https://doi.org/10.4028/www.scientific.net/AMM.204-208.2253

2012-01-01

Abstract:This paper studies air permeability, water absorption and chloride resistance properties of the normal concrete (NC) and the high performance concrete (HPC) adopted in the Yu-Cheng Bridge, Zhejiang Province. The air permeability and water absorption were measured by Autoclam, while the chloride resistance were tested by RCT after accelerate chloride ingression in the salt spray cabinet. The relationship among the air permeability, the water absorption and the chloride resistance of both kinds of concrete were analyzed. According to the result of Autoclam, HPC shows better resistance abilities of air permeability and water absorption, and this indicates that HPC is denser than NC. RCT shows that the chloride resistance of HPC is better than that of normal concrete.
Volume Stability of High Performance Concrete

桂海清,葛炜,王周松,钱晓倩

DOI: https://doi.org/10.3969/j.issn.1673-2812.2003.03.036

2003-01-01

Abstract:Types and factors of high performance concrete volume stability has been outlined and how well this research get on in the world has been introduced.It is pointed out that all kinds of concrete volume stability shoul be transformed to “whole deformation”and this research should be done in the condition that is close to actual circumstance.In this way,the durability of concrete will be settled better.
EXPERIMENTAL ENHANCEMENT STUDY ON DURABILITY OF CONCRETE IN WHARF PROJECT

李衍赫,付蕾,普绍良,秦强,胡华盛,董建锋,赵羽习

DOI: https://doi.org/10.13905/j.cnki.dwjz.2015.09.003

2015-01-01

Abstract:This paper basically introdued the experimental enhancement study on durability of concrete in wharf project. Six types of concrete were designed and producted,then the slump,compressive strength and 28 days chloride migration coefficient were tested. Then the performance of different concrete with unequal proportions was analyzed comparatively,and the concrete with the optimal ratio was applied on part of entity wharf project. The results showed that high performance concrete has a better ability of preventing chloride penetrating than the original concrete,besides,it can effectively enhance the durability of wharf project structure.
Research on Preparation Technique of C100 Ultra-High Performance Self-Compaction Concrete

Li Bin Xu,Nai Qian Feng,Ch'ng Guan Bee

DOI: https://doi.org/10.4028/www.scientific.net/amr.716.30

2013-01-01

Advanced Materials Research

Abstract:Self-compaction concrete is a new green concrete featuring self-leveling, self-compaction, low noise and low consumption of labor force. Nowadays, a large number of super high-rise buildings (h>400m) are under construction around the world, the complicated structures and dense reinforcement placement has brought numerous inconveniences to construction of concrete. Research on high strength / ultra-high strength self-compaction concrete thus becomes a hotspot. The porous structure of zeolite powder can help absorb the water reducing agent and then release it slowly in concrete mixture. With the low slump loss it produces, the prepared C100UHP-SCC can resist slump loss for over 3 hours. Test of super-high pumping at a height of 411m is carried out in the West Tower program at Pearl River New Town of Guangzhou (the building height is 441m). Drilled core test for L-shaped component indicates a dense internal structure, so it has a desirable self-compaction and capacity to pass through dense reinforcement.
STUDY ON AND DEVELOPMENT OF MODERN HIGH PERFORMANCE CONCRETE

李崇智,冯乃谦,李永德

DOI: https://doi.org/10.3969/j.issn.1000-4726.2003.01.004

2003-01-01

Abstract:By study on the development tendency of green high performance concrete,conclusion may be drawn that mixing with high performance wa ter re ducer and super-fine minerals admixture is a de-velop ment basis of mod ern high performance cement materials;high flu-idity and high dura bility are the special feature of it;self-compacting and high strength concrete are the direction of its development.
Research on Ultrahigh Pumpability of C80 HS & HP Concrete

LiBin Xu,NaiQian Feng,Ch'ng Guan Bee

DOI: https://doi.org/10.4028/www.scientific.net/amm.291-294.980

2013-01-01

Applied Mechanics and Materials

Abstract:The concrete technology has seen great improvement with the construction of large numbers of ultrahigh buildings at a height of more than 400 meters worldwide. It has been a research hotspot in the field of concrete recently to discuss how to reduce pumping resistance, avoid pumping block and meet the requirements of ultrahigh pumping (h>400m), especially the challenge of the ultrahigh pumping of HS & HP concrete with larger pumping resistance. This paper researches the selection of raw materials and design of mix proportion of C80 concrete used in the construction, and introduces the workable evaluation index, pumpability and pumping project in relation to the ultrahigh pumping of C80 concrete mixture, according to the construction requirements of the one-off pumping height (412 meters) for the C80 HS & HP concrete used in West Tower Project of Zhujiang (Pearl River) New Town in Guangzhou-- the tallest building in South China Region of mainland China.
Experimental study on C80 high strength pumped concrete

Qingxin FAN,Zhiyun YAO,Zhene JIAN,Dong LIN,Hengchang WANG

DOI: https://doi.org/10.3969/j.issn.1001-702X.2017.07.042

2017-01-01

Abstract:The effects of water-cement ratio,silicon content and slag content on the strength and pump ability of C80 high-strength pumped concrete are studied by orthogonal test. The results of orthogonal test showed that the order of influencing factors of 28 days strength of C80 concrete was silica fume content>slag content>water cement ratio,for pump ability,the test of slumping time showed that the influence of slag dosage was very significant,the ratio of water-cement was the second,and the influence of silica fume content on the slumping time was non-significant. On the basis of orthogonal test,the optimum mix proportion of C80 high strength pumping concrete was obtained:m(cement):m(sand):m(stone):m(silica fume):m(mineral powder):m(water reducing):m(water)=450:739:1006:30:120:13.2:144. The test results show that the concrete strength is 96 MPa in 28 d,reaches the design requirements of C80 concrete. Concrete initial slump is between 200~220 mm,and the slump loss is within 20 mm in 2 h,fresh concrete collapsed to fall cone time less than 10 s,with low viscosity,good pump ability.
Optimal Design and Performance of Concrete with Function Component in Marine Environment

Chong-gen PAN,Yi ZHANG,Chen-guang CUI,Dong WEI,Li-hao SUN,Wei-liang JIN,Jiang-hong MAO

DOI: https://doi.org/10.16552/j.cnki.issn1001-1625.2017.10.037

2017-01-01

Abstract:This study aimed to the problem of durability and hydration of high performance concrete .In this paper , axial compression , electric flux , and thermal of concrete were tested , and high performance concrete which incorporated inhibitor and mineral admixture with different gradation were studied .The results showed that: With optimization design , 28 d strength of concrete specimens has increased by incorporation of mineral admixtures and migrating inhibitor , and the electrochemical property of the steel bar were with the further promoted .Meanwhile , Resistance to chloride ion penetration of concrete is 39％lower than reference concrete and hydration heat of cementious material decreased by 37％than reference sample .While increasing incorporation of fly ash and mineral powder , performance of resistance to chloride ions and strength of concrete improved , and peak of hydration heat was also reduced .When mineral admixture content reached 22％, it is possible to achieve the best performance of concrete .The electric flux dropped significantly while mineral admixtures and migrating corrosion inhibitor were incorporated , and mineral admixtures and inhibitor have synergistic effect on durability of concrete and control of hydration heat .
ORDINARY CONCRETE,HIGH STRENGTH CONCRETE AND HIGH PERFORMANCE CONCRETE

Feng Naiqia

DOI: https://doi.org/10.3969/j.issn.1000-4726.2004.01.004

2004-01-01

Abstract:The process of application and development for concrete over 100 years is the process of strength and performance to be increased continually. According to increasing the strength and performance to differentiate its development process, the concrete can be divided simply into the ordinary concrete, high strength concrete and high performance concrete. In order to increase the durability of the concrete structure and extend the useable life, it is the important thing to increase the concrete strength and performance. So the high performance concrete will be the direction of technology development for the concrete in the future.
Application of high performance concrete to the foundation slab of Shenzhen Ping'An Financial Center

Wang Qiang,Yan Peiyu,Zhou Yuqi

2012-01-01

Abstract:A high-volume fly ash concrete with small shrinkage,low temperature rise,good workability,high compactness,and satisfied strength was designed.The high performance concrete designed was successfully applied to the massive foundation slab,and the project quality was excellent.
Performance Research on Ultra-High Performance Self-Compaction Concrete (Uhp-Scc)

Libin Xu,NaiQian Feng,Ch'ng Guan Bee

DOI: https://doi.org/10.4028/www.scientific.net/amr.671-674.1745

2013-01-01

Advanced Materials Research

Abstract:With development of concrete technology, the self-compaction concrete, as a green material, has been studied and widely applied thanks to its characteristics like self-leveling, self-compacting and desirable fillability. At present, high performance and ultra-high performance is an important trend in development of self-compaction concrete technology. Working performance, physical performance, endurance quality, ultra-high pumpability and microstructure of C100UHP-SCC are studied in this paper. The initial fluidity of studied UHP-SCC reaches above 550mm and maintains for 3h without loss, its compressive strength on 28d is more than 100MPa, which can ensure the architectural structure to last for 100 years and enable ultra-high pumping over 400m. The technical parameters mentioned above provide valuable reference for design and construction of super high-rise buildings which are above 1000m.
Development and Application of High Performance Concrete and Ultra-high Performance Concrete

Feng Naiqian

2009-01-01

Abstract:As the development of new technologies,which are the invention and application of new water reducer,the recovery and processing of ultrafine mineral powder,the development of fiber and the invention of new cement-based material,concrete has been developing rapidly,especially high performance concrete (HPC) and ultra-high performance concrete(UHPC),which are widely used in many projects. The research shows that reasonable mix proportion is important for UHPC preparation and the concrete strength at different ages is higher than design reference strength obviously. Furthermore,new UHPC has some characteristics of large viscosity,small flow velocity,long consumption for measuring slump and slump flow,which affect construction. In order to solve these disadvantages,some methods are put forward,such as controlling water consumption of per square meter,controlling slump loss,applying powder effect,and so on. Moreover,controlling water-cement and water-binder ratio can inhibit self-shrinkage cracks of UHPC.
Experimental study on strength and abrasion-resistance enhancement admixture

DeJin Xu,ChuanQing Fu,Xianyu Jin,Tian Ye,Jin Guo Jin

DOI: https://doi.org/10.4028/www.scientific.net/AMR.250-253.247

2011-01-01

Abstract:Cement concrete has an increasing utilization in highway construction. However, the lower flexural tensile strength and abrasion-resistance restricted the development of concrete pavement with heavy traffic. Hence, It has highlighted the need for research on high performance concrete (HPC). The design of specific concrete normally depends on the mixing of mineral admixtures in concrete mixture. This paper presents the first experimental study on strength and abrasion-resistance enhancement admixture (SAEA) mixed with slag powder, steel slag powder and silica fume. The optimal proportion of three mineral admixture and reasonable mixed amount of SAEA were then given, and the mechanism of SAEA reacted in concrete was analyzed based on sol-gel theory. Lastly, the effect of concrete mixed with SAEA was validated and the micro-structure transformation of specimens was given by SEM.
Study on performance of high strength pumping concrete compounded by fly ash composite powder under low water-cement ratio

Xiaoming LONG,Fufei WU,Shuangkuai DONG,Kebin SHI,Jianghua GUO

DOI: https://doi.org/10.11705/j.issn.1672-643X.2014.04.032

2014-01-01

Abstract:In order to investigate the performance of high performance concrete compounded by fly ash composite powder under low water-cement ratio (0.20),the paper discovered through mechanical proper-ty and microstructure analysis that the strength of fly ash concrete is low in early period but high in late period.The strength of slag micro powder concrete can rapidly increase in early phase .The strength of concrete is obvious when two complementary complex mixed .The work performance is better and meets the requirements of pumping concrete when fly ash , slag single blending and composite admixture .The Ca(OH)2 produced by surface-active of SiO2 and Al2O3 of particle and cement can occur volcano ashes reaction and create C-S-H gel that can reduce Ca ( OH) 2 in the concrete interface region .pozzolan cement produced in a slurry , Refinement and reduction of concrete .The unhydrated particles can be filled with concrete and significantly improve the density of concrete , reduce calcium silicon ratio of concrete .

C80 concrete with high intensity and performance

Characteristics and Application of C80 High Performance Concrete

Application Research of C80 High-Performance Concrete for the Guangzhou East Tower

New Development of Concrete Technology——Multifunctional High Performance Concrete

Preparation of C80~C100 High Performance Concrete and the Ultrahigh Pumping Technology

Mix Design and Engineering Application of C80 High-Performance Silicon Fume Concrete

Development and Engineering application of C70 steel pipe High Strength and High Performance Concrete

Experimental Study On Permeability And Chloride Resistance Properties Of Concrete In Yu-Cheng Bridge

Volume Stability of High Performance Concrete

EXPERIMENTAL ENHANCEMENT STUDY ON DURABILITY OF CONCRETE IN WHARF PROJECT

Research on Preparation Technique of C100 Ultra-High Performance Self-Compaction Concrete

STUDY ON AND DEVELOPMENT OF MODERN HIGH PERFORMANCE CONCRETE

Research on Ultrahigh Pumpability of C80 HS & HP Concrete

Experimental study on C80 high strength pumped concrete

Optimal Design and Performance of Concrete with Function Component in Marine Environment

ORDINARY CONCRETE,HIGH STRENGTH CONCRETE AND HIGH PERFORMANCE CONCRETE

Application of high performance concrete to the foundation slab of Shenzhen Ping'An Financial Center

Performance Research on Ultra-High Performance Self-Compaction Concrete (Uhp-Scc)

Development and Application of High Performance Concrete and Ultra-high Performance Concrete

Experimental study on strength and abrasion-resistance enhancement admixture

Study on performance of high strength pumping concrete compounded by fly ash composite powder under low water-cement ratio