Abstract:In this work, CuFe2O4 hollow microspheres assembled with nanosheets (CuFe2O4 HMANs) were synthesized using a solvothermal method followed by an annealing treatment. The effects of annealing temperature on microstructure, chemical composition and gas sensing characteristics of as-prepared samples were investigated. The results showed that annealing treatment played a crucial role in the final products. All samples demonstrated hollow spherical morphology assembled with nanosheets or nanoparticles. The CuFe2O4 HMANs annealed at 400 °C exhibited the best n-type conductometric sensing properties toward low-concentration NH3 at 100 °C and 49%RH. The sensor response to 10 × 10−6 NH3 was 4.0 with a rapid response time of 32 s, and it even showed a response of 1.2 toward 1 × 10−6 NH3 at the same condition, while a response of 3.95 to trimethylamine (TMA). The CuFe2O4 HMANs-based NH3 sensor also exhibited good selectivity and excellent reproducibility. Therefore, this work provided a novel promised sensing material of low-concentration NH3 and TMA for real-time monitoring.<h3 class="a-plus-plus">Graphic abstract</h3>

Low-operating temperature ammonia sensor based on Cu 2 O nanoparticles decorated with p-type MoS 2 nanosheets

Low operating temperature and highly selective NH3 chemiresistive gas sensors based on a novel 2D Ti3C2Tx/ZnO composite with p–n heterojunction

High-performance Ammonia Sensor at Room Temperature Based on 2D Conductive MOF Cu3(HITP)2

Synthesis and NH3/TMA sensing properties of CuFe2O4 hollow microspheres at low working temperature

Chemiresistive gas sensor based on Mo0.5W0.5S2 alloy nanoparticles with good selectivity and ppb-level limit of detection to ammonia

Enhanced and stable gas sensing performance towards NH3 with AuCu alloy nanoparticles modification over SnO2

Design of P–p Heterojunctions Based on CuO Decorated WS2 Nanosheets for Sensitive NH3 Gas Sensing at Room Temperature

Low Temperature Ammonia Sensor with Giant Sensitivity and Selectivity Based on W@WO2.92 Internal Ohmic Contact Core-Shell Nanostructures

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

Tungsten Oxysulfide Nanosheets for Highly Sensitive and Selective NH3sensing

Enhanced room-temperature NH 3 sensing properties of Cu 2 O concave octahedron/CNTs heterostructured hybrid via efficient charge transfer

Surface Enhancement Effects of Tiny SnO2 Nanoparticle Modification on Α-Fe2o3 for Room-Temperature NH3 Sensing.

WO<sub>3</sub> Nanosheets/FeCo<sub>2</sub>O<sub>4</sub> Nanoparticles Heterostructures for Highly Sensitive and Selective Ammonia Sensors

MXene/MoS 2 nanosheet/polypyrrole for high-sensitivity detection of ammonia gas at room temperature

Enhanced ammonia sensing performance based on MXene-Ti3C2Tx multilayer nanoflakes functionalized by tungsten trioxide nanoparticles

Enhancing Ammonia Sensing Performance of Ag 2 MoO 4 -based Mixed-Potential Sensor by Introducing Ionic and Electronic Conductance

Ppb-Level Ammonia Sensors Based on SnS<sub>2</sub>/rGO Nanohybrid Operating at Room Temperature

High-sensitive ppb-level ammonia QCM sensor based on sulfur doped Ti3C2Tx MXene

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

Room-Temperature NH<sub>3</sub> Sensor Based on SnO<sub>2</sub> Quantum Dots Functionalized SnS<sub>2</sub> Nanosheets

TiO2-modified MoS2 monolayer films enable sensitive NH3 sensing at room temperature