Abstract:Bi-2212 is the only high-field, high-temperature superconductor (HTS) capable of reaching a critical current density $J_{\text{c}}$(16 T, 4.2 K) of 6500 $\mathrm{A\cdot mm^{-2}}$ in the highly desirable round wire (RW) form. However, state-of-the-art Bi-2212 conductors still have a critical current density ($J_{\text{c}}$) to depairing current density ($J_{\text{d}}$) ratio around 20 to 30 times lower than that of state-of-the-art $\mathrm{Nb-Ti}$ or REBCO. Previously, we have shown that recent improvements in Bi-2212 RW $J_{\text{c}}$ are due to improved connectivity associated with optimization of the heat treatment process, and most recently due to a transition to a finer and more uniform powder manufactured by Engi-Mat. One quantitative measure of connectivity may be the critical current ($I_{\text{c}}$) distribution, since the local $I_{\text{c}}$ in a wire can vary along the length due to variable vortex-microstructure interactions and to factors such as filament shape variations, grain-to-grain connectivity variations and blocking secondary phase distributions. Here we compare $\sim$ 0.1 m length $I_{\text{c}}$ distributions of Bi-2212 RWs with recent state-of-the-art very high-$J_{\text{c}}$ Engi-Mat powder and lower $J_{\text{c}}$ and older Nexans granulate powder. We do find that the $I_{\text{c}}$ spread for Bi-2212 wires is about twice the relative standard of high-$J_{\text{c}}$ $\mathrm{Nb-Ti}$ well below $H_{\text{irr}}$. We do not yet see any obvious contribution of the Bi-2212 anisotropy to the $I_{\text{c}}$ distribution and are rather encouraged that these Bi-2212 round wires show relative $I_{\text{c}}$ distributions not too far from high-$J_{\text{c}}$ $\mathrm{Nb-Ti}$ wires.

On voltage-current characteristics and critical current in Bi-2212

Quantitative Analysis of Current-Voltage Characteristics of Semiconducting Nanowires: Decoupling of Contact Effects

VOLTAGE-CURRENT CHARACTERISTICS OF INTRINSIC JOSEPHSON SINGLE JUNCTION

Critical Current Distributions of Recent Bi-2212 Round Wires

Microstructure and Critical Current Density of Bi-2212 Single- and Multi-filamentary Wires with Overpressure Heat Treatment Processing

Critical Current Density Behaviors Across a Grain Boundary Inclined to Current with Different Angles in YBa 2 Cu 3 O 7-Δ Bicrystal Junctions

Transport Critical-Current and Voltage-Current Characteristics of Bi(2223) Silver-Clamped Thick Films

Critical-current Characteristics Ofc-Axis-oriented (Bi,pb)2sr2<…

Revealing the nature of the highly obscured galactic source IGR J16318-4848

Spread of critical currents in thin-film YBa2Cu3O7-x bicrystal junctions and faceting of grain boundary

Spread of Critical Currents in Thin-Film YBa2Cu3O7−x Bicrystal Junctions and Faceting of Grain Boundary

Hydrostatic Pressure Effect On The Critical Current Density Of First-Generation Bi-2223 Superconducting Wire

Planckian dissipation and non-Ginzburg-Landau type upper critical field in Bi2201

Structural and Compositional Defects in High-J/sub C/ Bi-2223 Tapes

Anomalous normal-state transport property in Bi-2201 single crystals

The Effect of Magnetic Fields, Temperature and Current on the Resistivity of Bi-2223 High Temperature Superconductors

Quasiparticle Tunnelling and Field-Dependent Critical Current in 2212-BSCCO

Enhancement of vortex liquid phase and reentrant behavior in NiBi3 single crystals

Critical current of Bi-2212 round wires with different heat treatment conditions

The Influence of Critical Current Density of Bi-2212 Superconductors by Defects after Yb-Doping

Magnetic Field Dependence of the Critical Current of Bi 2 Sr 2 CaCu 2 O 8+ -Based Intrinsic Josephson Junctions