Abstract:High diffraction signal-to-background ratios (SBRs), the ratio of diffraction peak integrated intensity over its background intensity, are desirable for a neutron diffractometer to acquire good statistics for diffraction pattern measurements and subsequent data analysis. For a given detector, while the diffraction peak signals primarily depend on the characteristics of the neutron beam and sample coherent scattering, the background largely originates from the sample incoherent scattering and the scattering from the instrument space. In this work, we investigated the effect of collimation on neutron diffraction SBRs of Si powder measurements using one high-angle area detector bank coupled with six different collimation configurations in a large and complex instrument space at the engineering materials diffractometer VULCAN, SNS, ORNL. The results revealed that the diffraction SBRs can be significantly improved by a proper coarse collimator that leaves no gap between the detector and the collimator, and the improvement of SBRs by a fine radial collimator was remarkable with a proper coarse collimator in place but not distinguishable without one. It was also found that the diffraction SBRs were not effectively improved by adding the neutron-absorbing element boron to the fine radial collimator body, which indicates that either the absorption of secondary scattered neutrons by the added boron is insignificant or the collimator base material (resin and ABS) alone attenuates background scattering sufficiently. These findings could serve as a useful reference for diffractometer developers and/or operators to optimize their collimation to achieve higher diffraction SBRs.

Early Compton Effect experiments revisited: Evidence for outstanding hard X-ray reflectivity of speculum metal

X-ray Reflectivity measurements of Speculum metal mirrors using Synchrotron radiation

Optical Design and Fabrication of the off Axis Paraboloid and Ellipsoidal Mirrors of Beam Line for Synchrotron Radiation Biological Spectroscopic Experiments

Effect of Mirror Quality on Optical Response of Nanoparticle‐on‐Mirror Plasmonic Nanocavities

Reflectivity test method of x-ray optics at the 100-m x-ray test facility

Reflectance Test Method of X-ray Optics on the 100-M X-ray Test Facility

Impact of reflection Comptonization on X-ray reflection spectroscopy: the case of EXO 1846-031

Manufacturing and Testing of X-ray Imaging Components with High Precision

X-ray reflectivity with a twist: quantitative time-resolved X-ray reflectivity using monochromatic synchrotron radiation

Nano-precision metrology of X-ray mirrors with laser speckle angular measurement

A Study Of The Specular Reflection Effect In Sub-Reflectarray Designs

Effect of Collimation on Diffraction Signal-to-Background Ratios at a Neutron Diffractometer

Strong Optical Absorption of a Metallic Film to Induce a Lensing Effect in the Visible Region

Simulation Of Hard X-Rays Source Produced By A Picosecond Laser Irradiated Solid Target For Compton Radiography

Highly Reflective Silver-Enhanced Coating with High Adhesion and Sulfurization Resistance for Telescopes

Preliminary parameter studies to form pellets of hard materials for optical constants derived via single-angle reflectance spectroscopy

Precision Polishing of the Mandrel for X-Ray Grazing Incidence Mirrors in the Einstein Probe

Analysis and Calibration of Electron-Dispersive Spectroscope and Scanning Electron Microscope Parameters to Improve their Results

Calculations on Ellipsoidal and Conical Focusing Mirrors for Small Angle Neutron Scattering

Reflectivity Studies and Production of New Flat Mirrors for the Cherenkov Threshold Detectors at CERN

Analytical computation of the off-axis Effective Area of grazing incidence X-ray mirrors