Abstract:Coprecipitation is the most commonly used method to synthesize iron oxide nanoparticles (IONPs) due to its low cost and environmentally friendly synthesis process. Recently, several studies have proposed that the coprecipitation formation of IONPs is through the aggregation of initially formed primary particles. However, there are still lack of systematic researches about the room temperature coprecipitation formation process of IONPs under quick mixing mode. Here, a gas/liquid mixed phase fluidic reactor was specially designed, and the influences of reaction time, reaction pH and valence of iron ions on the coprecipitation formation of IONPs in quick mixing mode were studied. The NH3 gas was used as the alkaline reactant. At pH above 10.0, the iron ions promptly hydrolyzed and precipitated to form primary nanoparticles, and then the primary nanoparticles accreted to form Fe3O4 nanoparticles in 2 min 30 s. As the reaction pH increased from 2.5 to 9.5, extremely small particles gradually aggregated to form Fe3O4 nanoparticles. Large Fe3O4 nanoparticles with a mean diameter of ~ 8.1 nm were completely formed at pH 9.5. And a small amount of poorly crystalline intermediate phases including akageneite, ferrihydrite and goethite were observed during this process. When Fe2+ ions were absent during the reaction process, the final products had poor crystallinity and weak magnetic properties. While if only Fe2+ ions were used in the precursor, the sheet-like green rusts generated firstly, and Fe3O4 nanoparticles would gradually form on the surface of green rusts with the partial oxidation of Fe2+ ions. The results of regulating the reaction conditions especially reaction pH indicate that this reaction design can effectively reduce the formation of intermediate crystal phases.

Synthesis of iron oxide nanoparticles with a ceramic membrane reactor: effects on particles size distribution

Influence of Different Preparation Methods on Crystallisation and Morphology of Fe2o3 Nanoparticles

A Size-Controllable Precipitation Method to Prepare CeO2 Nanoparticles in a Membrane Dispersion Microreactor

Preparation of Ceramic Ultrafiltration Membrane by Nano-Metal Oxides Modified

Preparation of ZnO nanoparticles using the direct precipitation method in a membrane dispersion micro-structured reactor

Controllable Preparation of Sio2 Nanoparticles Using A Microfiltration Membrane Dispersion Microreactor

Size-controlled synthesis of monodisperse superparamagnetic iron oxide nanoparticles

Preparation of FePO4 Nano-Particles by Coupling Fast Precipitation in Membrane Dispersion Microcontactor and Hydrothermal Treatment

Selective Synthesis of Fe 2 O 3 and Fe 3 O 4 Nanowires Via a Single Precursor: A General Method for Metal Oxide Nanowires

Enhancing anti-fouling performance of ceramic membranes through iron oxide modification for the separation of oil-containing fermentation broth

Synthesis and Characterisation of Iron Oxide Nanoparticles with Tunable Sizes by Hydrothermal Method

Ultrasonic-assisted Preparation of Monodisperse Iron Oxide Nanoparticles

Exploring Multi-Parameter Effects on Iron Oxide Nanoparticle Synthesis by SAXS Analysis

Effect of ferric ions on the morphology and size of magnetite nanocrystals synthesized by ultrasonic irradiation

The coprecipitation formation study of iron oxide nanoparticles with the assist of a gas/liquid mixed phase fluidic reactor

Preparation of Highly Dispersed and Small-Sized ZnO Nanoparticles in a Membrane Dispersion Microreactor and Their Photocatalytic Degradation

Preparation of Highly Dispersed Precipitated Nanosilica in a Membrane Dispersion Microreactor

Effect of Particle Size Gradients of Alumina Powders on the Pore Size Distribution of Ceramic Membrane

Effects on Direct Synthesis of Large Scale Mono-Disperse Ni0.5zn0.5fe2o4 Nanosized Particles

Morphologically controlled synthesis of ferric oxide nano/micro particles and their catalytic application in dry and wet media: a new approach

In situ and post-synthesis polymer stabilization of ferromagnetic nanoparticles synthesized by a membrane or conventional reactor