TC-11 Microwave Low-Noise Techniques Committee Report [MTT-S Society News]

Vadim Issakov,Shirin Montazeri,Joseph C. Bardin

DOI: https://doi.org/10.1109/mmm.2024.3351972

IF: 3.0619

2024-04-01

IEEE Microwave Magazine

Abstract:Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.

telecommunications,engineering, electrical & electronic

What problem does this paper attempt to address?

MTT-S Technical Committee 9 Microwave and Millimeter-Wave Solid- State Devices Committee 2022–2023 Report

Guillaume Callet,Keisuke Shinohara

DOI: https://doi.org/10.1109/mmm.2024.3429088

IF: 3.0619

2024-09-21

IEEE Microwave Magazine

Abstract:Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.

telecommunications,engineering, electrical & electronic
This issue includes the journal within a journal on microwave systems and applications

Jianguo Ma

DOI: https://doi.org/10.1109/TMTT.2019.2962661

IF: 4.3

2020-01-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:The IEEE Transactions on Microwave Theory and Techniques (TMTT) is the premier journal for the dissemination of scientific results regarding the design and application of high-frequency devices, circuits, and systems. Covering all theoretical and practical aspects of radio frequency technology for the last 66 years, it is regarded by the researchers and engineers as the most convenient vehicle to publish work worth sharing or to find a concept, tutorial, or technique worth knowing.
Technologies, Design, and Applications of Low-Noise Amplifiers at Millimetre-Wave: State-of-the-Art and Perspectives

Longhi,Pace,Colangeli,Ciccognani,Limiti

DOI: https://doi.org/10.3390/electronics8111222

IF: 2.9

2019-10-25

Electronics

Abstract:An overview of applicable technologies and design solutions for monolithic microwave integrated circuit (MMIC) low-noise amplifiers (LNAs) operating at millimeter-wave are provided in this paper. The review starts with a brief description of the targeted applications and corresponding systems. Advanced technologies are presented highlighting potentials and drawbacks related to the considered possibilities. Design techniques, applicable to different requirements, are presented and analyzed. An LNA operating at V-band (59–66 GHz) is designed and tested following the presented guidelines, demonstrating state-of-the-art results in terms of noise figure (average NF < 2 dB). A state-of-the-art table, reporting recent results available in open literature on this topic, is provided and examined, focusing on room temperature operation and performance in cryogenic environment. Finally, trends versus frequency and perspectives are outlined.

engineering, electrical & electronic,computer science, information systems,physics, applied
The Inaugural IEEE Microwave Theory and Technology Society Inter-Society Technology Panels at the 2023 Asia Pacific Microwave Conference

J.-C. Chiao,Chow-Yen Desmond Sim,Ke Wu

DOI: https://doi.org/10.1109/mmm.2024.3363974

IF: 3.0619

2024-04-24

IEEE Microwave Magazine

Abstract:Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.

telecommunications,engineering, electrical & electronic
Ultrathin, Electrically Small Noise Suppression Sheet for Microwave Cavities of 3-D Integrated Circuits: Design Methodology and Realization

Da Yi,Liu Tang,Ming-Chun Tang,Xing-Chang Wei,Er-Ping Li

DOI: https://doi.org/10.1109/tmtt.2021.3134653

IF: 4.3

2022-01-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:Miniaturized microwave cavities constructed by the parallel-plate waveguide (PPW) becomes one of the main propagation pathways of the radio-frequency interference (RFI) in 3-D integrated circuits. It is still challenging to suppress RFI in the practical cavities, where the space is extremely constrained. In this work, the working mechanism and design method of the noise suppression sheet (NSS) is quantitatively studied, serving as an efficient approach to suppress RFI within an electrically small size in these microwave cavities. The analysis is based on the dispersion relationship derivation of the NSS-loaded PPW structure. Both the derived formulas and the numerical study reveal that the imaginary part of the permeability, that is, $\mu _{i}$ , of the NSS plays a key role in increasing the reflection and attenuation loss, and thus obtaining a high RFI suppression level. Further study indicates even when the NSS’s profile is lower than 10% of the cavity’s height and the length is lower than $0.1\lambda _{0}$ , its suppression level up to 10 dB can be well accomplished, which is deemed difficult to achieve by using conventional methods. Moreover, this method is, respectively, applied in three practical engineering scenarios for the RFI suppression, that is, heatsink package above a chip, power distributed network (PDN), and flexible circuit. Good agreement is observed between the measurement results and the simulated ones, which confirmed the efficacy of our quantitatively developed NSS. The proposed method is promising for broad industrial applications, such as tiny chip packages, multi-channel systems, and flexible electronics.
Microwave Devices - Carbon Nanotubes As Cold Cathodes

Kenneth B K Teo,Eric Minoux,Ludovic Hudanski,Franck Peauger,Jean-Philippe Schnell,Laurent Gangloff,Pierre Legagneux,Dominique Dieumegard,Gehan A J Amaratunga,William I Milne

DOI: https://doi.org/10.1038/437968a

IF: 64.8

2005-01-01

Nature

Abstract:To communicate, spacecraft and satellites rely on microwave devices, which at present are based on relatively inefficient thermionic electron sources that require heating and cannot be switched on instantaneously. Here we describe a microwave diode that uses a cold-cathode electron source consisting of carbon nanotubes and that operates at high frequency and at high current densities. Because it weighs little, responds instantaneously and has no need of heating, this miniaturized electron source should prove valuable for microwave devices used in telecommunications.
Microwave Communication under Weak Intensity to Quantumized Level: Recent Progress and Future Challenges

Chen Gong,Shanchi Wu,Chengjie Zuo,Kai Yang,Shangbin Li,Junyu Zhang,Zhongbin Dai,Ming Huang,Ming Zhao,Rui Ni,Zhengyuan Xu,Jinkang Zhu

DOI: https://doi.org/10.23919/jcin.2021.9387702

2021-01-01

Journal of Communications and Information Networks

Abstract:We provide an overview of the recent progresses on the system architecture design and performance prediction for microwave signal detection under weak signal intensity regime, up to quantumized level. The technique roadmap includes two perspectives, the opto-electro-mechanical (OEM) and superconducting devices. For the former one, we first overview the concept of OEM, and then introduce the signal detection based on capacitive-opto-electro-mechanical systems and piezo- opto-electro-mechanical systems. For the latter one, we first overview the concept and architecture of Josephson junction, and then introduce the signal detection based on superconducting Hanbury Brown-Twiss (HBT) experiments and Λ energy-level splitting system. Besides, we review the microwave detection based on Rydberg atom system. We believe that this overview can provide a guidance for future transmission limit, signal processing, detection device fabrication and real experiments.
Electromagnetic Interference Suppression Technology for Miniaturized Microwave Cavities Based on Noise Suppression Sheet(NSS)

Liu Tang,Da Yi,Ming-Chun Tang,Xing-Chang Wei,Er-Ping Li

DOI: https://doi.org/10.1109/icept56209.2022.9873173

2022-01-01

Abstract:The three-dimensional (3-D) integration of high-density radio frequency (RF) front-end components inevitably introduce serious electromagnetic interference (EMI) between device-device, antenna-antenna, and antenna-device. In this paper, the noise suppression sheet (NSS) is quantitatively studied as an effective method to suppress EMI between RF devices in miniaturized packaging cavities. Taking the case when the NSS is loaded in a parallel-plate waveguide (PPW) as a benchmark of the NSS applied in the packages, the dispersion curve of the NSS-loaded structure is analyzed, from which it is demonstrated that the imaginary part of the NSS’s permeability determines the attenuation and reflection amplitude of the EMI. Then, two typical NSS application examples are proposed, i.e., the EMI suppression in the heatsink package above the chip, and the EMI suppression in the flexible circuit. The measured and simulated results indicate that the electrically small NSS with < 0.1λ transverse length can reduce the EMI with a significant magnitude, i.e., > 10 dB. This work provides an important reference for a wide range of industrial applications, such as EMI suppression in packages of chip modules, multi-channel RF systems, flexible electronics, and antenna arrays.
Investigation on TVO carbon ceramic sensor for low temperature measurement

Yilin Wang,Sijie Ren,Zhihua Gan,Sen Zhan,Yuefeng Yao

DOI: https://doi.org/10.3969/j.issn.1000-6516.2017.06.005

IF: 2.134

2017-01-01

Cryogenics

Abstract:In order to promote the application of TVOs (Carbon Ceramic Sensors(CCS)) at low temperature measurement,the characteristics of TVOs were investigated based on literature review.The structure,calibration,utility,characteristics and performance of TVOs under harsh working environments such as high magnetic fields and gamma radiation were studied thoroughly.The results show that TVOs are good thermometers at low temperature due to the high sensitivity,long-term stability,short response time,and high reliability in harsh working environments as well as cheap price,which is worth the attention of the cryogenics research.
Low-noise cryogenic microwave amplifier characterization with a calibrated noise source

M. Malnou,T. F. Q. Larson,J. D. Teufel,F. Lecocq,J. Aumentado

2023-12-23

Abstract:Parametric amplifiers have become a workhorse in superconducting quantum computing, however research and development of these devices has been hampered by inconsistent, and sometimes misleading noise performance characterization methodologies. The concepts behind noise characterization are deceptively simple, and there are many places where one can make mistakes, either in measurement or interpretation and analysis. In this article we cover the basics of noise performance characterization, and the special problems it presents in parametric amplifiers with limited power handling capability. We illustrate the issues with three specific examples: a high-electron mobility transistor amplifier, a Josephson traveling-wave parametric amplifier, and a Josephson parametric amplifier. We emphasize the use of a 50-$\Omega$ shot noise tunnel junction (SNTJ) as a broadband noise source, demonstrating its utility for cryogenic amplifier amplifications. These practical examples highlight the role of loss as well as the additional parametric amplifier `idler' input mode.

Quantum Physics
2024 Spring/Summer ARFTG Microwave Measurement Conference

Dominique Schreurs,Marco Spirito,Mauro Marchetti,Dennis Lewis

DOI: https://doi.org/10.1109/mmm.2024.3364569

IF: 3.0619

2024-04-24

IEEE Microwave Magazine

Abstract:Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.

telecommunications,engineering, electrical & electronic
IEEE Microwave Theory and Technology Society Membership and Geographic Activities: Women in Microwaves Subcommittee

Amelie Hagelauer,Jasmin Grosinger,Wenquan Che,Sherry Hess

DOI: https://doi.org/10.1109/mmm.2024.3363689

IF: 3.0619

2024-04-24

IEEE Microwave Magazine

Abstract:In this column, we would like to provide you with a recent update on the activities of the Women in Microwaves (WIM) subcommittee within the IEEE Microwave Theory and Technology Society (MTT-S) Membership and Geographic Activities. WIM is dedicated to establishing an inclusive network of women in the field of microwaves that attracts, scales, and connects. We do that by promoting women engineers/scientists in the microwave community, attracting women graduate students and professionals to join MTT-S, and increasing the visibility of women within MTT-S.

telecommunications,engineering, electrical & electronic
IEEE Transactions on Microwave Theory and Techniques Special Issue: AI and Machine Learning Based Technologies for Microwaves

DOI: https://doi.org/10.1109/tmtt.2021.3090872

IF: 4.3

2021-07-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:Describes the above-named upcoming special issue or section. May include topics to be covered or calls for papers.

engineering, electrical & electronic
High Tc Harmonic Mixer Applied to Josephson Junction Array Voltage Standard at NIM

SQ Xue,HH Li,XC Shen,HB Wang,WW Xu,QH Cheng,PH Wu

DOI: https://doi.org/10.1109/19.571824

1996-01-01

Abstract:Summary form only given, as follows.High Tc superconducting (YBCO) Josephson junction harmonic mixer has been used to improve the spectrum purity of the microwave source in the JJAVS at NIM. Compare with the microwave source using source locking counter EIP 578B, the spectrum purity of the microwave source has been improved significantly from -25 dBc/Hz (offset /spl plusmn/500 kHz) to -58 dBc/Hz (offset /spl plusmn/10 kHz). Therefore, the uncertainty of the JJAVS was reduced.
An Ultra-High Vacuum Scanning Tunneling Microscope with Pulse Tube and Joule-Thomson cooling operating at sub-pm z-noise

Marcus Eßer,Marco Pratzer,Marc Frömming,Jonas Duffhauß,Priyamvada Bhaskar,Michael A. Krzyzowski,Markus Morgenstern

2024-05-30

Abstract:We describe a compact ultra-high vacuum (UHV) scanning tunneling microscope (STM) system that does not need any external supply of cooling liquids. It achieves temperatures down to 1.5 K and a z-noise down to 300 fmRMS for the frequency range of 0.1 Hz - 5 kHz (feedback loop off). It employs a pulse tube cryocooler (PTC) and a Joule-Thomson (JT) stage inducing only small temperature oscillations at the STM with amplitude below 1 mK. The challenge to combine an effective vibrational decoupling from the PTC with sufficient thermal conduction is tackled by a multipartite approach. We realize a minimal stiffness of the UHV bellows that connect the PTC and the STM chamber. Fine Copper wires mechanically decouple the PTC stages from cooling plates that carry the thermal shields, the JT stage and the STM. Soft springs decouple the STM from the JT stage. Finally, the STM body has an optimized conical shape and is made of the light and stiff material Shapal Hi MSoft such that a strong reduction of low frequency vibrations results for the tunnel junction. The voltage noise in the tunnel junction is 0.12 mV and an RF antenna close to the tunnel junction provides radio frequency excitations up to 40 GHz with amplitudes up to 10 mV.

Instrumentation and Detectors
Two-level system noise reduction for Microwave Kinetic Inductance Detectors

Omid Noroozian,Jiansong Gao,Jonas Zmuidzinas,Henry G. LeDuc,Benjamin A. Mazin

DOI: https://doi.org/10.1063/1.3292302

2009-09-11

Abstract:Noise performance is one of the most crucial aspects of any detector. Superconducting Microwave Kinetic Inductance Detectors (MKIDs) have an "excess" frequency noise that shows up as a small time dependent jitter of the resonance frequency characterized by the frequency noise power spectrum measured in units of Hz^2/Hz. Recent studies have shown that this noise almost certainly originates from a surface layer of two-level system (TLS) defects on the metallization or substrate. Fluctuation of these TLSs introduces noise in the resonator due to coupling of the TLS electric dipole moments to the resonator's electric field. Motivated by a semi-empirical quantitative theory of this noise mechanism, we have designed and tested new resonator geometries in which the high-field "capacitive" portion of the CPW resonator is replaced by an interdigitated capacitor (IDC) structure with 10 - 20 micron electrode spacing, as compared to the 2 micron spacing used for our more conventional CPW resonators. Measurements show that this new IDC design has dramatically lower TLS noise, currently by about a factor of ~29 in terms of the frequency noise power spectrum, corresponding to an improvement of about a factor of 29^(1/2) in NEP. These new devices are replacing the CPW resonators in our next design iteration in progress for MKIDCam. Opportunities and prospects for future reduction of the TLS noise will be discussed.

Instrumentation and Detectors,Superconductivity
Temperature Stability, Low Loss and Defect Relaxation of MgO-TiO2 Microwave Dielectric Ceramics Modified by Ca0.8Sr0.2TiO3

Jie Zhang,Yu Luo,Zhenxing Yue,Longtu Li

DOI: https://doi.org/10.1016/j.ceramint.2017.09.149

IF: 5.532

2018-01-01

Ceramics International

Abstract:Temperature-stable and low-loss microwave dielectrics based on the MgO-TiO2 system with nominal formation Mgn+1TinO3n+1 (n = 5, MT) were prepared via the conventional solid-state reaction method. Ca0.8Sr0.2TiO3 (CST) was chosen as a τf compensator for matrix MT to form the composite ceramics (1-x)Mg6Ti5O16-xCa0.8Sr0.2TiO3 (0.10 ≤ x ≤ 0.26, MT-CST). The effects of CST additions on the phase composition, defect relaxation behavior, and microwave dielectric properties of MT were investigated. It revealed that undoped MT was basically consisted of MgTiO3 as a major phase and Mg2TiO4 as a minor phase, and such two phases coexisted well with CST additions. Interestingly, τf could be tuned close to zero (−1.28ppm/°C) for the MT-CST ceramics at x = 0.22, accompanied with a high Q×f value ~ 74,200GHz and a proper εr ~ 20.25 (9.90GHz). These materials possessed a good potential for applications in microwave components and devices. Meanwhile, significant relaxation phenomena were observed in all the MT-CST samples using dielectric spectroscopy and thermally stimulated depolarization current (TSDC) techniques. The oxygen-vacancy-related defects, shown as (TiTi′)-(VO••) dipoles and VO••, were the main types of defects in MT-CST, which was responsible for the relaxation behavior; meanwhile, the defect concentrations increased with the increase of CST content, thus resulting in the increase of dielectric loss at low and high frequencies.
Nonlinear Behavior of Josephson Traveling Wave Parametric Amplifiers

Claudio Guarcello,Felix Ahrens,Guerino Avallone,Carlo Barone,Matteo Borghesi,Luca Callegaro,Giovanni Carapella,Anna Paola Caricato,Iacopo Carusotto,Alessandro Cian,Alessandro D'Elia,Daniele Di Gioacchino,Emanuele Enrico,Paolo Falferi,Luca Fasolo,Marco Faverzani,Elena Ferri,Giovanni Filatrella,Claudio Gatti,Andrea Giachero,Damiano Giubertoni,Veronica Granata,Angelo Leo,Danilo Labranca,Carlo Ligi,Giovanni Maccarrone,Federica Mantegazzini,Benno Margesin,Giuseppe Maruccio,Renato Mezzena,Anna Grazia Monteduro,Roberto Moretti,Angelo Nucciotti,Luca Oberto,Luca Origo,Alex Stephane Piedjou Komnang,Sergio Pagano,Luca Piersanti,Alessio Rettaroli,Silvia Rizzato,Simone Tocci,Andrea Vinante,Mario Zannoni

DOI: https://doi.org/10.1109/tasc.2024.3367615

IF: 1.9489

2024-01-01

IEEE Transactions on Applied Superconductivity

Abstract:Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providing a relevant bandwidth. This research is centered on a comprehensive numerical investigation of the JTWPA, without resorting to simplifications regarding the nonlinearity of the essential components. Specifically, this study focuses on a thorough examination of the system, characterized by coupled nonlinear differential equations representing all components of the device. Proper input and output signals at the device's boundaries are considered. The analysis of the output signals undergoing the parametric amplification process involves a detailed exploration of phase-space dynamics and Fourier spectral analysis of the output voltage. This study is conducted while considering the parameters ruling the response of the device under pump and signal excitations. In addition to the expected signal amplification, the findings reveal that the nonlinear nature of the system can give rise to unforeseen phenomena, depending on the system's operational conditions, which include: the generation of pump tone harmonics, modulation of the signal gain, and incommensurate frequency generationeffects that are not easily accommodated by simplistic linearized approaches.

physics, applied,engineering, electrical & electronic
PROGRESS IN RESEARCH ON LOW-COFIRED MICROWAVE DIELECTRIC CERAMICS AND COMPONENTS

杨辉,张启龙

DOI: https://doi.org/10.3321/j.issn:0454-5648.2008.06.028

2008-01-01

Abstract:The structure and properties of low-temperature co-fired ceramics systems such as BiNbO4,MO-TiO2 (M= Mg,Zn,Ba),AB2O6 (A=Ba,Mg,Zn,B=Nb,Ta),MO-SiO2 (M=Ca,Mg,Zn),CaO-Li2O-Nb2O5-TiO2,and BaO-Ln2O3-TiO2 (Ln=Sm,Nd) are reviewed. The method,mechanism and existent problems of decreasing the sintering temperature of microwave dielectric ceramics are discussed. The properties of low-temperature co-fired ceramics are analyzed. The recent progress on chip multilayer microwave components such as filters,antenna and resonators is introduced. The future prospects of low-temperature co-fired ceramic microwave dielectric ceramics and their components are provided.
The IEEE Student Branch of Polytechnique Montreal in Action for Innovation, Collaboration, and Celebration

Thomas Micallef,Ali Ghadimi

DOI: https://doi.org/10.1109/mmm.2024.3441516

IF: 3.0619

2024-11-09

IEEE Microwave Magazine

Abstract:Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.

telecommunications,engineering, electrical & electronic

TC-11 Microwave Low-Noise Techniques Committee Report [MTT-S Society News]

MTT-S Technical Committee 9 Microwave and Millimeter-Wave Solid- State Devices Committee 2022–2023 Report

This issue includes the journal within a journal on microwave systems and applications

Technologies, Design, and Applications of Low-Noise Amplifiers at Millimetre-Wave: State-of-the-Art and Perspectives

The Inaugural IEEE Microwave Theory and Technology Society Inter-Society Technology Panels at the 2023 Asia Pacific Microwave Conference

Ultrathin, Electrically Small Noise Suppression Sheet for Microwave Cavities of 3-D Integrated Circuits: Design Methodology and Realization

Microwave Devices - Carbon Nanotubes As Cold Cathodes

Microwave Communication under Weak Intensity to Quantumized Level: Recent Progress and Future Challenges

Electromagnetic Interference Suppression Technology for Miniaturized Microwave Cavities Based on Noise Suppression Sheet(NSS)

Investigation on TVO carbon ceramic sensor for low temperature measurement

Low-noise cryogenic microwave amplifier characterization with a calibrated noise source

2024 Spring/Summer ARFTG Microwave Measurement Conference

IEEE Microwave Theory and Technology Society Membership and Geographic Activities: Women in Microwaves Subcommittee

IEEE Transactions on Microwave Theory and Techniques Special Issue: AI and Machine Learning Based Technologies for Microwaves

High Tc Harmonic Mixer Applied to Josephson Junction Array Voltage Standard at NIM

An Ultra-High Vacuum Scanning Tunneling Microscope with Pulse Tube and Joule-Thomson cooling operating at sub-pm z-noise

Two-level system noise reduction for Microwave Kinetic Inductance Detectors

Temperature Stability, Low Loss and Defect Relaxation of MgO-TiO2 Microwave Dielectric Ceramics Modified by Ca0.8Sr0.2TiO3

Nonlinear Behavior of Josephson Traveling Wave Parametric Amplifiers

PROGRESS IN RESEARCH ON LOW-COFIRED MICROWAVE DIELECTRIC CERAMICS AND COMPONENTS

The IEEE Student Branch of Polytechnique Montreal in Action for Innovation, Collaboration, and Celebration