Electrically conductive Si3N4 bonded SiC: effect of Fe2O3, MoO3, and SiC particle size

Muhammad Shoaib Anwar,Hong Joo Lee,Jang-Hoon Ha,Jongman Lee,In-Hyuck Song

DOI: https://doi.org/10.1007/s43207-024-00455-0

IF: 2.506

2024-11-28

Journal of the Korean Ceramic Society

Abstract:The effects of initial SiC particle size on the electrical resistivity, thermal conductivity, and flexural strength of SiC when combined with Fe 2 O 3 and MoO 3 additives were investigated. Each batch contained 10 wt% Fe 2 O 3 as a sintering additive. The addition of MoO 3 (0–2 wt%) and variation in sintering temperature (1200–1400 °C) collectively influenced the electrical resistivity, while the thermal conductivity, air flow permeability and flexural strength was predominantly affected by the SiC particle size. The samples sintered at 1300 °C with 1 wt% of MoO 3 showed an electrical resistivity, a thermal conductivity, and a flexural strength of 2.1 × 10 –1 Ω cm, 21 W/m K, 59 MPa, respectively, for 4.5 μm SiC, and 3.1 × 10 –1 Ω cm, 30 W/m K, 25 MPa, respectively, for 30 μm SiC. The in-situ formation of a network-like structure of secondary conductive phases such as Fe 3 Si along with the diffusion of N 2 reduced the electrical resistivity, whereas the formation of Si 3 N 4 improved the mechanical properties. The designed composition showed excellent extrudability, forming a square honeycomb structure, verifying its large-scale viability for novel applications, such as heatable filters and electrically conductive catalytic supports.

materials science, ceramics