Abstract:Abstract. The surveying and mapping administrative competent departments in 31 provinces (autonomous regions and municipalities) have built provincial-level satellite navigation and positioning reference stations and data centers, and provided CORS services. This provides a good condition for exploring the application of geological hazard monitoring and early warning using Virtual Reference Station (VRS) service based on CORS. At present, the layout mode of "one point one reference station" is usually adopted, when GNSS is used for geological disaster monitoring and early warning. However, the high deployment cost of this plan limits its largescale promotion and application. Using the existing CORS service resources of natural resource system, this paper carried out the application experiment of virtual reference station in geological hazard monitoring application at Huanglongya geological hazard monitoring site in Shaanxi Province, and assessed the virtual reference station data quality, comparative analyzed the precision of static baseline processing results and GNSS real-time deformation monitoring results. The experimental results show that the overall quality of virtual reference station data is better than that of the monitoring station, and the accuracy of the static baseline calculation results is better than 1.0cm in the X direction, and better than 2.0cm in the Y direction and Z direction, which is similar to the static baseline calculation results formed by the physical reference station. The accuracy of the baseline results of real-time observation data calculation is better than 5mm in horizontal RMS and 15mm in vertical RMS. Therefore, it can be seen that the virtual reference station is feasible to be used as the reference station for geological disaster monitoring. In addition, the application experiment of network RTK real-time dynamic single epoch positioning mode is also carried out in geological hazard monitoring. The experimental results show that the RMS values of all three directions are ±3.7mm, ±9.2mm and ±5.0mm respectively, which meet the precision requirements of GNSS disaster monitoring. Therefore, it is also a feasible scheme for geological disaster monitoring and early warning.

Toward geodynamic studies and GNSS CORS measurements: West Ukrainian GNSS network data processing using Bernese v5.2 software

Estimation of Velocities of Ukrainian GNSS Stations in the IGb08 Reference Frame

GEODESY, CARTOGRAPHY, AND AERIAL PHOTOGRAPHY

Propagation of the IGb14 Reference Frame on the Territory of Ukraine Based on Results of the Analysis of GNSS Observations for GPS Weeks 2106–2237

Improvement of the Estimation of the Vertical Crustal Motion Rate at GNSS Campaign Stations Based on the Information of GNSS Reference Stations

Global Navigation Satellite System (GNSS) time series and velocities about a slowly convergent margin processed on high-performance computing (HPC) clusters: products and robustness evaluation

Evaluation of the Performance of Online GPS/GNSS Data Processing Services for Monitoring the Land Deformations and Movements

PPP Solution‐Based Model of Absolute Vertical Movements of the Earth's Crust in Poland With Consideration of Geological, Tectonic, Hydrological and Mineral Information

Python Software Tool for Diagnostics of the Global Navigation Satellite System Station (PS-NETM)–Reviewing the New Global Navigation Satellite System Time Series Analysis Tool

The current situation of Russia's GNSS continuous operating reference station network and thinking on future development

FEASIBILITY VERIFICATION OF VIRTUAL REFERENCE STATION TECHNOLOGY IN GEOLOGICAL HAZARD MONITORING

Data Processing and Analysis of EGNOS Trial in China Area

Improving GNSS Zenith Wet Delay Interpolation by Utilizing Tropospheric Gradients: Experiments with a Dense Station Network in Central Europe in the Warm Season

Surface Velocities and Strain-Rates in the Euro-Mediterranean Region From Massive GPS Data Processing

Software for Geodynamical Researches Used in the LSGER IAA

Stability of Northern Eurasia from Satellite Geodesy Data

Modeling of the Vertical Movements of the Earth’s Crust in Poland with the Co-Kriging Method Based on Various Sources of Data

Improving access to geodetic imaging crustal deformation data using GeoGateway

Ionospheric radio tomography based on the GPS/GLONASS navigation systems

Assessing the accuracy of online GNSS processing services and commercial software on short baselines

Calculation of the Ephemeris and Clock Corrections of GLONASS and GPS Navigation Space Vehicles in Ultra-Rapid Regime on the Basis of Measurement Data