Abstract:In the recent ten years, the Global Navigation Satellite System (GNSS) processing has experienced a fast development in many areas including the increasing number of frequencies, the higher quality of positioning instruments, e.g. the receiver clocks and the satellite clocks, and more integrated modeling and calculation strategies. This thesis includes investigations of diﬀerent modeling and parameterization methods in modern GNSS positioning with the focus on three important positioning error sources: the receiver clock errors, the phase ambiguities and the ionospheric delays. The thesis shows that making use of the high-quality receiver clocks and applying appropriate receiver clock modeling can help to improve the kinematic height estimates, which are highly correlated with the receiver clock parameters. An eﬃcient pre-elimination and back-substitution strategy of epoch parameters with relative clock constraints between subsequent and near-subsequent epochs has been developed to enable processing of, e.g., high-rate data. A detailed analysis of the relationship between the clock quality and the improvement of kinematic heights has been performed. Studies were also conducted to decorrelate the receiver clock parameters, the kinematic heights and the troposphere parameters. Experiments with real data have shown that appropriate deterministic and stochastic clock models can also be helpful to increase the resolution of the estimated Zenith Path Delay (ZPD) parameters without obvious degradation of the stability of the kinematic heights. The second aspect of the thesis focuses on the resolution of triple-frequency phase ambiguities with diﬀerent linear combinations. A complete analytical investigation of Geometry-Free (GF) and Ionosphere-Free (IF) triple-frequency phase ambiguity resolution with minimized noise level has been performed for diﬀerent frequency triplets. The analysis was done separately for the best two linear combinations and the third one. Experiments have shown that the fractional parts and the formal errors of the combined ambiguities of the best two linear combinations are relatively small for Galileo E1, E5b and E5a and GPS L1, L2 and L5 triplets, while the third linear combination remains a challenge. Further analysis with the geostationary satellites of the Beidou Navigation Satellite System (BDS) elaborated in the framework of this thesis has also conﬁrmed that the

Calculation of the Ephemeris and Clock Corrections of GLONASS and GPS Navigation Space Vehicles in Ultra-Rapid Regime on the Basis of Measurement Data

Real-Time Calibration Method For Ground-Based Tt&C Systems Using Satellite-To-Ground Differential Gps

Precision Real-Time Orbit Determination Algorithm and Hardware-in-the-Loop Simulation for ZDPS-2 Satellite

Space weather: risk factors for Global Navigation Satellite Systems

Research on the Feasibility of Rapid Ephemeris Replace Final Ephemeris

Methods, Tools, and Information Technologies for Improving Glonass Characteristics

Sub-meter-level navigation with an enhanced multi-GNSS single-point positioning algorithm using iGMAS ultra-rapid products

Validation of the Accuracy and Convergence Time of Real Time Kinematic Results Using a Single Galileo Navigation System

Precise Real-Time Navigation of LEO Satellites Using a Single-Frequency GPS Receiver and Ultra-Rapid Ephemerides

Evolution of orbit and clock quality for real-time multi-GNSS solutions

Accuracy Analysis of GNSS Hourly Ultra-Rapid Orbit and Clock Products from SHAO AC of iGMAS

Ionospheric radio tomography based on the GPS/GLONASS navigation systems

Galileo High Accuracy Service in Real-Time PNT, Geoscience and Monitoring Applications

Characterization of the Impact of Glonass Observables on Receiver Bias Estimation for Ionospheric Studies

Multi-GNSS Combined Orbit and Clock Solutions at iGMAS

Estimation of Velocities of Ukrainian GNSS Stations in the IGb08 Reference Frame

Software for Geodynamical Researches Used in the LSGER IAA

A Fast Positioning Method Based On High-Precision Clock For Gnss Receivers

The Data Processing and Analysis for the CE-5T1 GNSS Experiment

GLONASS signal characteristics analysis and navigation performance for geostationary satellites

Advanced Modeling and Algorithms for High-Precision GNSS Analysis