Abstract:Carbon-based products are crucial to our society, but their production from fossil-based carbon is unsustainable. Production pathways based on the reuse of CO2 will achieve ultimate sustainability. Furthermore, the costs of renewable electricity production are decreasing at such a high rate, that electricity is expected to be the main energy carrier from 2040 onward. Electricity-driven novel processes that convert CO2 into chemicals need to be further developed. Microbial electrosynthesis is a biocathode-driven process in which electroactive microorganisms derive electrons from solid-state electrodes to catalyze the reduction of CO2 or organics and generate valuable extracellular multicarbon reduced products. Microorganisms can be tuned to high-rate and selective product formation. Optimization and upscaling of microbial electrosynthesis to practical, real life applications is dependent upon performance improvement while maintaining low cost. Extensive biofilm development, enhanced electron transfer rate from solid-state electrodes to microorganisms and increased chemical production rate require optimized microbial consortia, efficient reactor designs, and improved cathode materials. This Account is about the development of different electrode materials purposely designed for improved microbial electrosynthesis: NanoWeb-RVC and EPD-3D. Both types of electrodes are biocompatible, highly conductive three-dimensional hierarchical porous structures. Both chemical vapor deposition (CVD) and electrophoretic deposition were used to grow homogeneous and uniform carbon nanotube layers on the honeycomb structure of reticulated vitreous carbon. The high surface area to volume ratio of these electrodes maximizes the available surface area for biofilm development, i.e., enabling an increased catalyst loading. Simultaneously, the nanostructure makes it possible for a continuous electroactive biofilm to be formed, with increased electron transfer rate and high Coulombic efficiencies. Fully autotrophic biofilms from mixed cultures developed on both types of electrodes rely on CO2 as the sole carbon source and the solid-state electrode as the unique energy supply. We present first the synthesis and characteristics of the bare electrodes. We then report the outstanding performance indicators of these novel biocathodes: current densities up to -200 A m-2 and acetate production rates up to 1330 g m-2 day-1, with electron and CO2 recoveries into acetate being very close to 100% for mature biofilms. The performance indicators are still among the highest reported by either purposely designed or commercially available biocathodes. Finally, we made use of the titration and off-gas analysis sensor (TOGA) to elucidate the electron transfer mechanism in these efficient biocathodes. Planktonic cells in the catholyte were found irrelevant for acetate production. We identified the electron transfer to be mediated by biologically induced H2. H2 is not detected in the headspace of the reactors, unless CO2 feeding is interrupted or the cathodes sterilized. Thus, the biofilm is extremely efficient in consuming the generated H2. Finally, we successfully demonstrated the use of a synthetic biogas mixture as a CO2 source. We thus proved the potential of microbial electrosynthesis for the simultaneous upgrading of biogas, while fixating CO2 via the production of acetate.

Electrosynthesis of Amino Acids from Biomass and Nitrate at Industrial Current Densities Using Porous PbBi Electrodes

Tandem Dual-Site PbCu Electrocatalyst for High-Rate and Selective Glycine Synthesis at Industrial Current Densities.

Electrosynthesis of amino acids from NO and α-keto acids using two decoupled flow reactors

Electrocatalytic Production of Ammonia: Biomimetic Electrode–electrolyte Design for Efficient Electrocatalytic Nitrogen Fixation under Ambient Conditions

Upgrading waste NOx into amino acids via electrocatalysis on Co nanoparticles encapsulated in hollow carbon nanofibers

Boosting Electrochemical Nitrogen Fixation by Mesoporous Rh Film with Boron and Sulfur Co-Doping

Ambient Electro-Synthesis of Ammonia - Electrode Porosity and Composition Engineering

Electrosynthesis of Α‐amino Acids from NO and Other NOx Species over CoFe Alloy‐decorated Self‐standing Carbon Fiber Membranes

Efficient ammonia electrosynthesis by coupling to concurrent methanol oxidation

Electrocatalytic Synthesis of Essential Amino Acids from Nitric Oxide Using Atomically Dispersed Fe on N-doped Carbon.

Highly selective NH3 synthesis from N2 on electron-rich Bi0 in a pressurized electrolyzer

High‐performance Ammonia Electrosynthesis from Nitrate in a NaOH‐KOH‐H2O Ternary Electrolyte

Highly Selective NH 3 Synthesis from N 2 on Electron-Rich Bi 0 in a Pressurized Electrolyzer

Electrosynthesis of ammonia with high selectivity and high rates via engineering of the solid-electrolyte interphase

High-performance artificial nitrogen fixation at ambient conditions using a metal-free electrocatalyst

Purposely Designed Hierarchical Porous Electrodes for High Rate Microbial Electrosynthesis of Acetate from Carbon Dioxide.

Direct ammonia synthesis from the air via gliding arc plasma integrated with single atom electrocatalysis

Ambient Electrosynthesis of Ammonia: Electrode Porosity and Composition Engineering

Catalytic amino acid production from biomass-derived intermediates

Exclusive Nitrate to Ammonia Conversion Via Boron-Doped Carbon Dots Induced Surface Lewis Acid Sites

Bismuth Hollow Nanospheres for Efficient Electrosynthesis of Ammonia under Ambient Conditions