Abstract:Ammonia (NH 3 ) is a primary form of reactive nitrogen (Nr) which is an essential nutrient for all lives on the earth. Over the past century, the anthropological N 2 -fixing process in the industry (i.e., the Haber-Bosch process) has contributed to a significant portion of NH 3 production, and has also led to the continued accumulation of Nr in our ecosystems that has caused alarming and profound damages to the ecosystems as well as human welfare, as the rate of Nr generation is not balanced by the natural nitrification-denitrification process for its elimination. For example, leakage of excessive nitrate (NO 3 − ) into the water bodies caused by overfertilization of crop fields and discharged streams from food processing facilities has led to the formation of "dead zones" in coastal areas created by eutrophication. Denitrification in nature is also accompanied by the considerable generation of nitrous oxide (N 2 O) which possesses century-long stability and a 300-time greater potential for greenhouse effect than CO 2 . Therefore, restoring the balance between the generation and elimination of Nr is a challenging but urgent task faced by our human beings today. Sustainable solutions to this human-induced matter have been actively pursued in recent years either by converting Nr to harmless N 2 (i.e., denitrification), or by enhancing the effective circulation and utilization of Nr in the cycle of the nitrogen element. For instance, the electrochemical reduction of nitrate (NO3RR) is a promising approach as it can eliminate Nr without the need for additional oxidant/reductant. Selective NO3RR toward N 2 is highly desirable but remains difficult to achieve due to the high activation barrier for linking two N atoms on typical catalyst surfaces, and thus the coexistence of competing pathways toward other N-containing products. Alternatively, if other forms of Nr in waste resources can be converted to NH 3 in an electrochemical device, this process will not only alleviate the environmental impacts of those Nr, but also simultaneously produce NH 3 that could substantially decrease the NH 3 demand from the Haber-Bosch process, reduce the use of fossil-derived H 2 in NH 3 production, and decelerate the accumulation of Nr. In this work, we seek to develop an electricity-driven process that can convert various forms of Nr in real waste resources into manageable NH 3 products. The key component is a membrane-free alkaline electrolyzer (MFAEL) which transforms Nr into NH 3 as the sole N-containing product. With the inexpensive and robust MFAEL system, we achieved an ampere-level partial current density towards NH 3 production. By properly choosing the conditions of NH 3 collection from MFAEL, continuous production of pure NH 3 -based chemicals can be realized without the need for additional separation procedures. Techno-economic analysis (TEA) suggests the potential economic feasibility of the waste-to-NH 3 process by coupling electrodialysis (ED) for Nr concentration and the MFAEL process for Nr conversion, offering an all-sustainable route for upcycling waste N into the highest-demanded N-based chemical product, so that the growing trend of Nr buildup can be largely decelerated and reversed.

Proton Exchange Membrane Electrode Assembly for Ammonia Electrosynthesis from Nitrate

Electrocatalytic Upcycling of Nitrate Wastewater into an Ammonia Fertilizer via an Electrified Membrane.

Membraneless Electrochemical Synthesis Strategy toward Nitrate-to-Ammonia Conversion

Gas permeable membrane electrode assembly with in situ utilization of authigenic acid and base for transmembrane electro-chemisorption to enhance ammonia recovery from wastewater

Electrochemical Synthesis of Ammonia Using Proton and Hydroxide Exchange Membrane Cells

High‐performance Ammonia Electrosynthesis from Nitrate in a NaOH‐KOH‐H2O Ternary Electrolyte

Upcycling wastewater nitrate into ammonia fertilizer via concurrent electrocatalysis and membrane extraction

Continuous Ammonia Electrosynthesis Using Physically Interlocked Bipolar Membrane at 1000 Ma Cm−2

Electrified Conversion of Contaminated Water to Value: Selective Conversion of Aqueous Nitrate to Ammonia in a Polymer Electrolyte Membrane Cell

Ambient Electro-Synthesis of Ammonia - Electrode Porosity and Composition Engineering

Electrochemical Nitrogen Reduction Reaction on Noble Metal Catalysts in Proton and Hydroxide Exchange Membrane Electrolyzers

Efficient Electrochemical Conversion of Nitric Oxide to Ammonia Using a Porous Nickel Catalyst in a Membrane Electrode Assembly Electrolyzer

Electrochemical nitrate reduction to ammonia in a BPM-MEA system

Hydrogen Reconversion from Ammonia through Anion Exchange Membrane Electrolysis

Ambient Electrosynthesis of Ammonia: Electrode Porosity and Composition Engineering

Heterostructure Cu3P−Ni2P/CP catalyst assembled membrane electrode for high-efficiency electrocatalytic nitrate to ammonia

A mixed proton–electron-conducting cathode with a Ru nanoparticle catalyst for electrochemical ammonia synthesis based on a proton-conducting BZCYYb electrolyte

Nickel-Based Membrane Electrodes Enable High-Rate Electrochemical Ammonia Recovery.

(Invited) Progress and Perspective Towards Low-Cost High-Performance Anion Exchange Membrane Water Electrolysis

Electrochemically Upcycling Waste Nitrogen into Ammonia in a Membrane-Free Alkaline Electrolyzer

Enhanced Electrocatalytic Conversion of Nitrates to Ammonia: Fuel from Waste