Abstract:With the development of the Haber process and the subsequent work done by Bosch, ammonia production become an industrially and economically viable way to fix nitrogen. Ammonia used as a fertilizer has helped increase the global food production and estimates put it at about 40% of the global population’s food needs the ammonia fertilizer from the Haber process[1]. However, the Haber-Bosch process is an energy intensive process requiring high pressure (15-30 MPa) and relatively high temperature (430 °C – 480 °C) and is highly centralized with only about 13 companies producing at about 29 plants[2, 3]. Renewable energy resources offer a possible alternative way to fix nitrogen at low temperature and lower pressure to produce ammonia in a decentralized way. High temperature solid proton conductors have been used to produce ammonia selectively, but the high temperature can degrade the ammonia[5]. Low temperature polymer electrolyte membranes can be used which might reduce the overall energy input. Proton exchange membrane (PEM) suffers from conductivity loss due to the ammonia converting to ammonium[6], which reduces the cation conductivity. The other issue is the competing hydrogen evolution reaction (HER) which is especially fast in the acidic environment[7]. By moving to an alkaline environment, ammonia will not affect the conductivity because hydroxide exchange membranes (HEMs) use anions as the charge carriers. HEMs also allow the use of non-precious metal catalysts which could reduce the overall cost of these electrochemical devices. In this presentation, we will discuss the activity of a variety of catalyst, PGMs, metal nitrides, and non-precious metals in both HEM and PEM electrolyzers for their ammonia production. We utilized the hydrogen oxidation reaction (HOR) as the counter electrode which can also be utilized as a reference. This study allows for the direct comparison of PEM and HEM for electrochemical nitrogen reduction. References: 1. Erisman, J.W., et al., Nature Geosci, 1(10): p. 636.(2008). 2. Mineral Commodity Summaries 2015, U.S.G. Survey, 2015: Reston, Virginia. p. 196. 3. Marnellos, G. and M. Stoukides, Science, 282(5386): p. 98.(1998). 4. Kordali, V., G. Kyriacou, and C. Lambrou, Chem. Commun., (17): p. 1673.(2000). 5. Amar, I.A., et al., J Solid State Electrochem, 15(9): p. 1845.(2011). 6. Lan, R. and S. Tao, RSC Advances, 3(39): p. 18016.(2013). 7. Sheng, W., H.A. Gasteiger, and Y. Shao-Horn, J. Electrochem. Soc., 157(11): p. B1529.(2010).

Continuous Ammonia Electrosynthesis Using Physically Interlocked Bipolar Membrane at 1000 Ma Cm−2

Membraneless Electrochemical Synthesis Strategy toward Nitrate-to-Ammonia Conversion

Chemically interlocked bipolar membrane achieving stable water dissociation for high output ammonia electrosynthesis

Electrocatalytic Upcycling of Nitrate Wastewater into an Ammonia Fertilizer via an Electrified Membrane.

Proton Exchange Membrane Electrode Assembly for Ammonia Electrosynthesis from Nitrate

Nickel-Based Membrane Electrodes Enable High-Rate Electrochemical Ammonia Recovery.

High‐performance Ammonia Electrosynthesis from Nitrate in a NaOH‐KOH‐H2O Ternary Electrolyte

Ambient Electro-Synthesis of Ammonia - Electrode Porosity and Composition Engineering

A High-Efficiency Electrochemical Proton-Conducting Membrane Reactor for Ammonia Production at Intermediate Temperatures

Long-term continuous ammonia electrosynthesis

Ambient Electrosynthesis of Ammonia: Electrode Porosity and Composition Engineering

Efficient Electrochemical Conversion of Nitric Oxide to Ammonia Using a Porous Nickel Catalyst in a Membrane Electrode Assembly Electrolyzer

Continuous-flow electrosynthesis of ammonia by nitrogen reduction and hydrogen oxidation

Upcycling wastewater nitrate into ammonia fertilizer via concurrent electrocatalysis and membrane extraction

Gram-level NH3 Electrosynthesis via NOx reduction on a Cu Activated Co Electrode

Regulating Interfacial Microenvironment in Aqueous Electrolyte via a N2 Filtering Membrane for Efficient Electrochemical Ammonia Synthesis

Electrosynthesis of ammonia with high selectivity and high rates via engineering of the solid-electrolyte interphase

High-Efficiency Electrosynthesis of Ammonia with Selective Reduction of Nitrate in Neutral Media Enabled by Self-Supported Mn 2 CoO 4 Nanoarray

Electrochemical nitrate reduction to ammonia in a BPM-MEA system

Ammonium crossover as a function of membrane type and operating conditions in flow cells for ammonia synthesis and water treatment applications

Electrochemical Synthesis of Ammonia Using Proton and Hydroxide Exchange Membrane Cells