Abstract:BACKGROUND, AIMS, AND SCOPE:Heavy metal contaminants in environment, especially in drinking water, are always of great concern due to their health impact. Due to the use of heavy metals as catalysts during plastic syntheses, particularly antimony, human exposure to metal release from plastic bottles has been a serious concern in recent years. The aim and scope of this study were to assess metal contaminations leaching out from a series of recycling plastic bottles upon treatments.METHODOLOGY:In this study, leaching concentrations of 16 metal elements were determined in 21 different types of plastic bottles from five commercial brands, which were made of recycling materials ranging from no. 1 to no. 7. Several sets of experiments were conducted to study the factors that could potentially affect the metal elements leaching from plastic bottles, which include cooling with frozen water, heating with boiling water, microwave, incubating with low-pH water, outdoor sunlight irradiation, and in-car storage.RESULTS:Heating and microwave can lead to a noticeable increase of antimony leaching relative to the controls in bottle samples A to G, and some even reached to a higher level than the maximum contamination level (MCL) of the US Environmental Protection Agency (USEPA) regulations. Incubation with low-pH water, outdoor sunlight irradiation, and in-car storage had no significant effect on antimony leaching relative to controls in bottle samples A to G, and the levels of antimony leaching detected were below 6 ppb which is the MCL of USEPA regulations. Cooling had almost no effect on antimony leaching based on our results. For the other interested 15 metal elements (Al, V, Cr, Mn, Co, Ni, Cu, As, Se, Mo, Ag, Cd, Ba, Tl, Pb), no significant leaching was detected or the level was far below the MCL of USEPA regulations in all bottle samples in this study. In addition, washing procedure did contribute to the antimony leaching concentration for polyethylene terephthalate (PET) bottles. The difference of antimony leaching concentration between washing procedure involved and no washing procedure involved (AC) was larger than zero for samples A to G. This interesting result showed that higher antimony concentration was detected in experiments with no washing procedures compared with those experiments with washing procedures. Our study results indicate that partial antimony leaching from PET bottles comes from contaminations on the surface of plastic during manufacturing process, while major antimony leaching comes from conditional changes.CONCLUSION:The results revealed that heating and microwaving enhance antimony leaching significantly in PET plastic bottles. Plastic bottle manufacturers should consider the contaminations during manufacturing process and washing bottles before first use was strongly recommended to remove those contaminants.

The disinfectant residues promote the leaching of water contaminants from plastic pipe particles

Sulfadiazine Destruction by Chlorination in a Pilot-Scale Water Distribution System: Kinetics, Pathway, and Bacterial Community Structure.

Factors Affecting the Formation of DBPs by Chlorine Disinfection in Water Distribution System

Microplastics and chemical leachates from plastic pipes are associated with increased virulence and antimicrobial resistance potential of drinking water microbial communities

Microplastic acts as a vector for contaminants: the release behavior of dibutyl phthalate from polyvinyl chloride pipe fragments in water phase

Leaching of organic matters and formation of disinfection by-product as a result of presence of microplastics in natural freshwaters

Effects of pipe materials on the characteristic recognition, disinfection byproduct formation, and toxicity risk of pipe wall biofilms during chlorination in water supply pipelines

Secondary risks induced by polyethylene microplastics during the disinfection processes of chlorination, UV irradiation, and ozone treatment

Investigation of Organic Matter Migrating from Polymeric Pipes into Drinking Water under Different Flow Manners

Research of organic compounds migration from polymeric pipes

In Fl Uence Factors of Organic Compounds Leaching from PE Pipes and the Potential Toxic Effects on E . Coli and Rat C 6 Glioma Cell

Research Progress of the Impacts of Plastic Wa Ter Supply Piping to Water Safety

Investigation of Organic Compounds Migration from Polymeric Pipes into Drinking Water under Long Retention Times

Photochlorination-induced degradation of microplastics and interaction with Cr(VI) and amlodipine

Potential Disinfection Byproducts-Related Risks to Drinking Water? Molecular Insights into the Dissolved Organic Matter from Photodegradation of Polyethylene Microplastics

Volatile organic compounds generation pathways and mechanisms from microplastics in water: Ultraviolet, chlorine and ultraviolet/chlorine disinfection

Assessment of Metal Contaminations Leaching out from Recycling Plastic Bottles Upon Treatments.

PFAS promotes disinfection byproduct formation through triggering particle-bound organic matter release in drinking water pipes

Impact of pipe material and chlorination on the biofilm structure and microbial communities

Influence of biodegradable plastics on the generation of disinfection byproducts in the chlorination process

Plasma-mediated aging process of different microplastics: Release of dissolved organic matter and formation of disinfection by-products