Abstract:In this study, the mechanism of thermal exposure on the mechanical properties of two Ti60 alloys with different micro-texture regions (MTRs) was systematically investigated through macro- and microstructural characterization. It was found that when the alloy was exposed to prolonged thermal exposure at 600 °C for 100 h, the strength of the no-MTR samples increased significantly and the plasticity decreased sharply. In contrast, the MTR samples showed a sharp decrease in strength and plasticity due to the transmissibility of dislocation slip and crack propagation, resulting in the formation of a continuous brittle cleavage plane on the fracture. Meanwhile, the oxide film formed on the surface promotes the formation of early cracks and cleavage planes, and the oxide film serves as the location of surface crack nuclei and creates a notch effect leading to premature fracture of the alloy. It is further found that the oxide film is mainly composed of alternating nanocrystalline grains of Al 2 O 3 and TiO 2 , and there is an oxygen-rich layer of Ti 3 O near the matrix, and these nano-oxides increased the brittleness of the oxide film. The strengthening and embrittlement mechanism of the alloy was revealed based on the deformation characteristics, i.e. the plasticity reduction was attributed to the formation of the oxide film and precipitation of the α 2 phase on the surface, whereas the inhomogeneous distribution of the α 2 phase in the interior led to the formation of microcracks in the interior. The precipitation of (Ti, Zr) 6 Si 3 phase at grain boundaries hinders the dislocation motion and leads to a significant increase in the strength of No-MTR alloys. This study reveals the effects of interactions between MTRs, oxide films and precipitated phases on the thermal exposure properties of Ti60 alloys, providing theoretical support for the stability of titanium alloy properties at elevated temperatures.

New insights into ω-embrittlement in high misfit metastable β-titanium alloys: Mechanically-driven ω-mediated amorphization

Origin of the Ductile-to-brittle Transition of Metastable Β-Titanium Alloys: Self-hardening of Ω-Precipitates

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Origin of the Ω-Strengthening and Embrittlement in Β-Titanium Alloys: Insight from First Principles

Heterogeneous distribution of isothermal ω precipitates prevents brittle fracture in aged β-Ti alloys

Experimental and first-principles novel insights of atomic collapsed structure and composition-driven ω-precipitates

Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

New Insights into Formation Mechanism of Interfacial Twin Boundary Ω-Phase in Metastable Β-Ti Alloys

Tensile Brittleness and Ductility Improvement in a Novel Metastable Β Titanium Alloy with Lamella Structure

Deformation twinning-induced single-variant ω-plates in metastable β-Ti alloys containing athermal ω-precipitates

Deformation-Induced Grain Refinement and Amorphization in Ti-10V-2Fe-3Al Alloy

Phase transformation mediated anomalous plasticity of titanium under severe loading conditions

Non-layer-wise Fracture and Deformation Mechanism in Beta Titanium Cubic Lattice Structure Manufactured by Selective Laser Melting

In-Situ SEM Observation on Fracture Behavior of Titanium Alloys with Different Slow-Diffusing β Stabilizing Elements

Exploration of Nano-scale Structural Instabilities in Metastable Β Titanium Alloys Using Advanced Electron Microscopy

Mechanism of thermal exposure on the mechanical properties of microtextured Ti60 alloys

Deformation Mechanisms in a Β-Quenched Ti-5321 Alloy: In-situ Investigation Related to Slip Activity, Orientation Evolution and Stress Induced Martensite

Microstructural morphology effects on fracture toughness and crack growth behaviors in a high strength titanium alloy

Transformation-induced plasticity in omega titanium

Strain Rate-Induced Plasticity in Bcc Β-Ti Alloy Single Crystal Micropillars Containing Brittle Ω-Precipitates