Abstract:Laboratory and industrial results are used to elucidate the general features of the deactivation of supported copper metal catalysts in hydrogenation reactions. Hydrogenations with copper catalysts are milder than with their nickel or platinum counterparts, and they have selectivities that are exploited commercially. They are used in single stream plants for production of hydrogen via the low-temperature water shift gas reaction, and for methanol manufacture from synthesis gas, and also in hydrogenation of speciality organic compounds. Common catalyst types are based on Cu/Cr2O3 (copper chromite) or Cu/ZnO formulations that contain stabilisers and promoters such as alkaline earth oxides and Al2O3. These have several roles, including inhibition of sintering, and poison traps that prevent poisoning of the active metal surface. The best understood are Cu/ZnO formulations that have improved sulphur resistance due to formation of thermodynamically stable ZnS. Copper catalysts are susceptible to thermal sintering via a surface migration process and this is markedly accelerated by the presence of even traces of chloride. Care must be, therefore, taken to eliminate halides from copper catalysts during manufacture, and from the reactants during use. Operating temperatures must be restricted, usually to below 300°C when catalyst longevity is important with large catalyst volumes.Water can soften some Cu/ZnO formulations during use, and cause particle breakage that leads to high-pressure drop and maldistribution of flow through large catalyst beds and impaired performance. Commercial copper catalysts are not acidic, and since they operate under mild conditions, carbon deposition (coking) is uncommon. However, conventional site blocking poisoning with sulphur compounds, and particularly by H2S, is common. The initial phase involves interaction with surface hydroxyl groups and elimination of water. Sulphur is retained strongly on the catalyst, and when partially sulphided they can exhibit selectivity in hydrogenation of organic hydrogenations. A variety of other sulphur compounds, and some chlorinated organic compounds, can cause complete deactivation or enhanced selectivity.

Deactivation of supported copper metal catalysts for hydrogenation reactions

Study on Deactivation by Sulfur and Regeneration of Pd/C Catalyst in Hydrogenation of N-(3-nitro-4-methoxyphenyl) Acetamide

Highly Enhanced Catalytic Stability of Copper by the Synergistic Effect of Porous Hierarchy and Alloying for Selective Hydrogenation Reaction

Copper-based catalysts synthesized during hydrogenation

Stable Cu Catalysts Supported by Two-dimensional SiO<sub>2</sub> with Strong Metal-Support Interaction

Influence of the metal and of the support on the activity and stability of bifunctional catalysts for toluene hydrogenation

Preparation of Highly Dispersed Cu Catalysts from Hydrotalcite Precursor for the Dehydrogenation of 1,4-Butanediol

Deactivation of Cu/ZSM-5 Catalysts during the Conversion of 2,3-Butanediol to Butenes

Effect of Controlled Deactivation on the Properties of a Supported Nickel Catalyst in the Reactions of Liquid-Phase Hydrogenation of Carbon–Carbon Multiple Bonds

Catalyst Deactivation and Regeneration Processes in Biogas Tri-Reforming Process. The Effect of Hydrogen Sulfide Addition

Photo-Chemically-Deposited and Industrial Cu/ZnO/Al2O3 Catalyst Material Surface Structures During CO2 Hydrogenation to Methanol: EXAFS, XANES and XPS Analyses of Phases After Oxidation, Reduction, and Reaction

Cu@SiO2 catalyst with high copper dispersion for chemoselective hydrogenation of p-chloronitrobenzene

Deactivation of Copper Catalysts During CO2 Reduction Occurs via Dissolution and Selective Redeposition Mechanism

Physical Regulation of Copper Catalyst with a Hydrophobic Promoter for Enhancing CO2 Hydrogenation to Methanol

Copper-Based Catalysts Confined in Carbon Nanocage Reactors for Condensed Ester Hydrogenation: Tuning Copper Species by Confined SiO 2 and Methanol Resistance

Insights into the Mechanism of Low-Temperature H2S Oxidation over Zn–Cu/Al2O3 Catalyst

Dissecting ZnO X /Cu interfacial self-encapsulation and methanol-induced strong metal-support interaction of the highly active alloyed CuZn and ZnO for methanol steam reforming

Preparation of Cu/ZnO/Al2O3 Catalysts in a Solvent-Free Routine for CO Hydrogenation

Atomically Precise, Thiolated Copper–Hydride Nanoclusters as Single-Site Hydrogenation Catalysts for Ketones in Mild Conditions

Recent Advances in Electrocatalytic Hydrogenation Reactions on Copper‐Based Catalysts

Copper-Based Catalysts for Selective Hydrogenation of Acetylene Derived from Cu(OH) 2