Abstract:The surface texture of the wearing course on asphalt mixtures is the critical factor affecting the friction behaviors of pavement. The present traditional surface structure evaluation index does not provide the range and the distribution of the texture, and most pavement texture polishing equipment does not represent the actual loading action. In this paper, based on a laser profilometer and a spectral analysis, the mean profile depth (MPD) characterizing the pavement macro-texture is calculated, and the spectral parameter (LTX,1–31.5) characterizing the range and the distribution of the road surface texture is derived. MLS11 equipment is used to polish the wearing course with different design parameters, and the evolution characteristics and influencing factors of the surface texture are studied. The results show that the MPD and the LTX,1–31.5 could distinguish the influence of the oil–stone ratio and the mixture type on the surface macro-structure of the asphalt mixture, and the results of the variation coefficient of the parallel test are within 3.0%. The decay process of the MPD can be divided into three processes (i.e., the relative decay period, the decay period, and the stable period) and six stages. The decay process of the LTX,1–31.5 involves the three processes (the relative stable period, the decay period, and the stable period) and four stages. When the oil–stone ratio increases from 4.4% to 5.4%, the attenuation rates of the MPD and the LTX,1-31.5 decrease. The surface texture of both the GAC-16 and SAS-16 samples are better compared with the AC-16 sample, and the attenuation law of the MPD and the LTX,1-31.5 value is similar. The loss rates of the MPD of the four aggregates are ranked as follows: limestone > diabase > andesite > granite. The loss rates of the LTX,1-31.5 of the four aggregates are ranked as follows: limestone > diabase > granite > andesite.

Experimental analysis and modeling of micro-texture and vickers hardness impact on polished stone value in high-friction aggregates

Research on the polishing process of aggregates on pavement surface on basis of mineral characteristics

Multi-scale Study of the Polishing Behaviour of Quartz and Feldspar on Road Surfacing Aggregate

Study of Micro-Texture and Skid Resistance Change of Granite Slabs During the Polishing with the Aachen Polishing Machine

Fractal and spectral analysis of aggregate surface profile in polishing process

Evaluating On The Skid Resistance Of The Aggregates Based On Mineralogy

A study of the laboratory polishing behavior of granite as road surfacing aggregate

Evolution of texture and skid resistance change of high-friction surface due to differential-polishing undergoing simulated traffic wear

Modeling and analysis of the material removal depth for stone polishing

Abrasivity measurement of brittle rock after thermal treatment

Development Of Aggregate Micro-Texture During Polishing And Correlation With Skid Resistance

Effect of surface polishing on the tribological performance of hard coatings under lubricated three-body abrasive conditions

Atomistic understanding of rough surface on the interfacial friction behavior during the chemical mechanical polishing process of diamond

Characteristic quantitative evaluation and stochastic modeling of surface topography for zirconia alumina abrasive belt

Evaluation of Polishing Behavior of Fine Aggregates Using an Accelerated Polishing Machine with Real Tires

The Experimental Research of the Relationship Between Rock Surface Roughness and PDC Bit Wear

Simulation and experimental study of ultrasonic-assisted shear thickening polishing of cemented carbide

Evolution characteristics of the surface texture of the wearing course on asphalt pavement based on accelerated pavement polishing

Evolution of Aggregate Surface Characteristics in Polishing Process

A Contribution to Texture Analysis of Pavements under Simulated Polishing: Some New Findings

A Study of the Effect of Roughness on the Three-Body Wear Mechanism from a Microscopic Point of View: Asperity Peak Removal