Abstract:Abstract Current experimental methods of assessing rock fracture toughness require a large sample size (i.e., Brazillian test, semi-circular bending, three-point bending), which cannot be extracted at greater depths and along horizontal well. Alternatively, fracture toughness can be evaluated at a finer scale using scratch testing. This study investigates the rock failure mechanism using micro-scratch testing and phase field modeling on rock fragments. The phase field approach models the crack growth and initiation based on energy minimization principles and by portraying the crack surface as a diffused entity. The method has been known for its robustness in preventing numerical singularities due to sharp crack discontinuities in complex crack topologies. In the phase-field scheme, a regularization scalar order parameter is used to indicate the material’s state (from undamaged to damage) during fracture formation. The associated loss of stiffness in rock during fracture formations is captured by the coupling of selected energy degradation function with embedded scalar order parameter and partial differential equations defining the deformation, history, and phase-field evolutions. In doing so, information on stress strain development is needed to evaluate the change in free energy during cracks formation. In this study, scratch testing is used to obtain load-displacement data related to stress strain history. During the test, an indenter scratches the surface of the rock under increasing load. The critical loads where the crack initiates and the chipping spallation occurs are identified based on the microscopic observations, acoustic emission signals, recorded tangential force and recorded depth. The critical loads are used to determine the crack length associated with chipping formation, while the recorded force displacement data are used to obtain the dimensionless stress-strain curve. Both the crack lengths and the dimensionless stress strain curve are then used as the input to the phase field model developed to approximate the fracture toughness of the rock tested. Scratch tests are performed on samples obtained from Eagle Ford formation. The experiments are conducted in short transverse and divider orientations. The crack formations are studied under the progressive load application. The critical loads where crack initiates and chips form are identified mainly based on the panoramic picture obtained after the test and the spikes seen on the Acoustic Emission signals. Preliminary results show that the fracture toughness is lower for samples tested in parallel to the bedding orientation (i.e., divider). Fracture toughness of rocks has attracted wide attention in the last few years in the design and analysis of hydraulic fracturing for hydrocarbon and geothermal recovery. The currently proposed methodology allows for a quicker and more reliable way of approximating rock fracture toughness from small rock samples. The incorporation of the phase field model allows better prediction of rock fracture toughness as the method is capable of overcoming classical model limitations of quantifying crack initiation and crack propagation in the complex fracture networks.

Determination of Internal Friction Angle of Rocks Using Scratch Test with a Blunt PDC Cutter

An experimental investigation of brittle failure mechanisms in scratch tests of rock

Prediction of formation abrasiveness under the action of a PDC bit based on the fractal dimension of a rock surface

Approximation of Rock Fracture Toughness using Scratch Test and Phase-Field Modeling Approach

Fragmentation Characteristics of Rocks Under Indentation by a Single Polycrystalline Diamond Compact Cutter

A New Understanding of Punch-Through Shear Testing

Abrasivity measurement of brittle rock after thermal treatment

The Experimental Research of the Relationship Between Rock Surface Roughness and PDC Bit Wear

Investigation of the material separation behaviour of rocks using scratch tests for the design of tool grinding processes

Measurement of the basic friction angle of planar rock discontinuities with three rock cores

Experimental investigation of the rock cutting process and derivation of the 3D spatial distribution of the formation strength using in-cutter sensing

The Scratch Test As A Means To Measure Strength of Sedimentary Rocks

Experimental and theoretical analysis of rock failure characteristics by a single PDC cutter under downhole pressurized conditions

A Critique on the Correlations Between Rock Abrasiveness, Hardness, and Mechanical Characteristics: Implication of LCPC Abrasiveness and Breakability Coefficients

Discrete element modeling of tool‐rock interaction I: rock cutting

The Rock Fragmentation Mechanism in Rock Cutting with PDC Cutter Under Hydrostatic Pressures

An experimental and numerical investigation on rock cutting behavior of specially-shaped PDC cutter

Friction Coefficients Calculation via Surface Roughness Characterization for Tight Sedimentary Rocks

Numerical Investigation of the Effect of Pre-induced Cracks on Hard Rock Cutting Using Finite Element Analysis

Experimental investigation on the anisotropy of friction property for dry and water-saturated rock

Experimental Study of the Rock Cutting Mechanism with PDC Cutter Under Confining Pressure Condition