Abstract:Fluorinated polymers or fluorinated chemicals are often used to enhance the hydrophobicity and oleophobicity of surfaces. In this work, amphiphobic coating surfaces of silica nanoparticles modified by methyltrimethoxysilane (MTMS), ethyltriethoxysilane (ETES) or/and 1H,1H,2H,2H-perfluorooctyltriethoxysilane (HFOTES) were fabricated via a sol-gel process. The results demonstrated that the surface wettability of coatings was greatly influenced by the type of silanes which were used to modify silica, and superhydrophobic and oil-repellent coating surface was obtained by using silica co-modified by MTMS and HFOTES (MF-SiO2). The water contact angles of dip-coated MF-SiO2 coatings could reach to 150.2 degrees with the lowest angle of water hysteresis (3.3 degrees) among all samples. One reason was that the addition of MTMS changed the holes structures of F-SiO2, and the co-modified surface of MF-SiO2 formed the multi-scale rough structures. Moreover, the percentage of fluorine at the surfaces for sample MF-SiO2 was greatly increased due to the packing of -CF3 groups on surface. In other words, the addition of MTMS influenced the outmost layer of coating and changed the distribution of fluorinated chemical groups for sample MF-SiO2. Therefore, the coating for sample MF-SiO2 could exhibit superhydrophobic and oil-repellent properties owing to the multi-scale surface roughness as well as the packing of -CF3 groups on the outmost layer of surface. (C) 2018 Elsevier B.V. All rights reserved.

A simple and energy-saving route for the fabrication of superhydrophobic surfaces based on modified hyperbranched polyethyleneimine and nano silica

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Fabrication of durable polytetrafluoroethylene superhydrophobic materials with recyclable and self-cleaning properties on various substrates

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

A facial method for constructing superhydrophobic surface by one-step surface etching combined with melt blowing process

Facile Fabrication of Highly Omniphobic and Self-Cleaning Surfaces Based on Water Mediated Fluorinated Nanosilica Aggregation

Facile fabrication of hierarchical textures for substrate-independent and durable superhydrophobic surfaces

Substrate-versatile Approach to Fabricate Mechanochemically Robust and Superhydrophobic Surfaces from Waste Fly Ash

Design of fluorine-free superhydrophobic silk fabrics with mechanical durability and self-cleaning properties for oil-water separation

Fabricating superhydrophobic surfaces via coating amine-containing fluorinated emulsion and Michael addition reaction

Fabrication of Superhydrophobic Coating Based on Waterborne Silicone-Modified Polyurethane Dispersion and Silica Nanoparticles

Preparation of superhydrophobic coatings with excellent mechanical and chemical stability by one-step spraying method with selected fluorine-free modifiers

One Step Sol-Gel Electrochemistry For The Fabrication Of Superhydrophobic Surfaces

A Facile Approach to Fabricate Superhydrophobic Coatings on Porous Surfaces Using Cross-Linkable Fluorinated Emulsions

Facile Preparation of a Fluorine‐Free, Robust, Superhydrophobic Coating through Dip Coating Combined with Non‐Solvent Induced Phase Separation (Dip‐Coating‐NIPS) Method

An all-water-based system for robust superhydrophobic surfaces

Development of Durable, Fluorine-free, and Transparent Superhydrophobic Surfaces for Oil/Water Separation.

A Simple and Convenient Method for Preparing Fluorine-Free Durable Superhydrophobic Coatings Suitable for Multiple Substrates

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Large-area fabrication and applications of patterned surface with anisotropic superhydrophobicity