Abstract:Thermal conductivity ( κ ) is a crucial parameter in determining the thermoelectric figure of merit, zT , of thermoelectric materials. Consequently, numerous innovative strategies have been developed in recent years to reduce κ to the glass-like limit for enhanced thermoelectric properties. In this study, we employ a donor-like dopant, Sb, in GeTe to decrease both the electronic and lattice thermal conductivity. By reducing the hole concentration to 1.4 × 10 20 cm −3 in Ge 0.92 Sb 0.08 Te, we achieve a significantly low electronic thermal conductivity of 0.56 W m −1 K −1 at room temperature. Additionally, the strain and mass field fluctuations resulting from the presence of impurity atoms strengthen phonon scattering, effectively suppressing the lattice thermal conductivity. Furthermore, SiC nano-composites are intentionally introduced into the matrix, which leads to grain refinement. The grain boundaries and phase boundaries also contribute significantly to the reduction of lattice thermal conductivity, ultimately resulting in a small value of 0.42 W m −1 K −1 for the sample Ge 0.92 Sb 0.08 Te + 0.2 wt% SiC at room temperature. The Vickers hardnesses for all composite samples are measured which reveal strengthened hardness, thanks to the grain refinement. The improved peak zT for the Ge 0.92 Sb 0.08 Te + 0.2 wt% SiC sample is mostly attributed to the multiple reductions in κ . Through simulation, a high power density of 36 mW has been achieved for a single-leg Ge 0.92 Sb 0.08 Te + 0.2 wt% SiC thermoelectric device with a temperature difference of Δ T = 438 K. Our contribution demonstrates that elemental doping combined with nanocompositing can effectively suppress the thermal conductivity from room temperature to high temperature, beneficial for enhanced thermoelectric properties.

Decoupling opposed thermoelectric properties

Double–layered GeTe/Sb2Te heterostructures for enhancing thermoelectric performance

Microstructures and Thermoelectric Properties of GeSbTe Based Layered Compounds

Thermoelectric properties and microstructure of nanocomposite Sb-GeO2 and Sb–TiO2 thin films

Anionic regulation and valence band convergence boosting the thermoelectric performance of Se-alloyed GeSb 2 Te 4 single crystal

Enhanced thermoelectric performance in GeTe-Sb2Te3 pseudo-binary via lattice symmetry regulation and microstructure stabilization

Decoupled electron and phonon transport in thermoelectric GeTe compounded with multi-walled carbon nanotubes

Thermoelectric performance of p-type (Bi,Sb)2Te3 incorporating amorphous Sb2S3 nanospheres

Enhancing the thermoelectric performance of GeTe through Sb doping and nanocompositing with SiC for reduced thermal conductivity

Anion-site-modulated Thermoelectric Properties in Ge 2 Sb 2 Te 5 -Based Compounds

Synergistically Optimized Thermal Conductivity and Carrier Concentration in GeTe by Bi–Se Codoping

Strong Phonon-Phonon Interactions Securing Extraordinary Thermoelectric Ge 1- x Sb x Te with Zn-Alloying-Induced Band Alignment.

Crystal Symmetry Induced Structure and Bonding Manipulation Boosting Thermoelectric Performance of GeTe

Synergistic Texturing and Bi/Sb‐Te Antisite Doping Secure High Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3 ‐Based Thin Films

High Thermoelectric Performance Achieved in Sb-Doped GeTe by Manipulating Carrier Concentration and Nanoscale Twin Grains

Realizing High Thermoelectric Performance in GeTe‐Based Supersaturated Solid Solutions

Largely Enhanced Seebeck Coefficient and Thermoelectric Performance by the Distortion of Electronic Density of States in Ge2Sb2Te5

High Thermoelectric Performance of Non‐Stoichiometric and Oriented GeTe Thin Films

Enhanced Thermoelectric Performance in Ge 0.955− x Sb x Te/FeGe 2 Composites Enabled by Hierarchical Defects

Intrinsically Low Lattice Thermal Conductivity and Anisotropic Thermoelectric Performance in In‐doped GeSb2Te4 Single Crystals

Silver-Based Intermetallic Heterostructures in Sb2Te3 Thick Films with Enhanced Thermoelectric Power Factors