Abstract:Electrocatalytic water splitting is an essential hydrogen production method for resolving present energy shortage and progress toward more efficient technologies. For this purpose, a versatile and cheap electrocatalysts are the main challenge along the way. In this report, we synthesized vanadium telluride and carbon nanotube (VTe–CNT)‐based nanocomposite via facile hydrothermal route. The VTe–CNTs are characterized by X‐ray diffraction analysis, scanning electron microscopy, energy‐dispersive spectroscopy, Fourier transform infrared spectroscopy, and Brunauer–Emmett–Teller. These characterizations depict nanosphere structures, morphology, and high surface area that maintains high porosity, which are essential for inclusive water‐splitting phenomena in 1.0 M solution of KOH. Additionally, the electrochemical performance of VTe–CNTs has shown best O2 evolution reactions activity with of onset potential of 1.42 V versus reversible hydrogen electrode and required 10 mA/cm2 of current density at 278 mV overpotential, which is excellent among other electrocatalysts, VTe (342 mV@10 mA/cm−2) and CNTs (365 mV@10mA/cm−2). Moreover, VTe–CNT exhibits remarkable stability for almost 20 h. It also requires a low onset potential of 0.05 V with a small Tafel slope of 47 mV/dec for H2 evolution reactions. Hence, this research might facilitate the easy transportation of electrons and open up the new era, serving as an excellent replacement for noble metal–derived materials.

Correction to: Fabrication of vanadium telluride anchored on carbon nanotubes nanocomposite for overall water splitting

Correction: High performance, binder-free electrodes with single atom catalysts on doped nanocarbons for electrochemical water splitting synthesized using one-step thermally controlled delamination of thin films

Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Correction: Co–Mo–P carbon nanospheres derived from metal–organic frameworks as a high-performance electrocatalyst towards efficient water splitting

Correction: Recent progress on covalent organic frameworks for photocatalytic hydrogen generation via water splitting

Fabrication of vanadium telluride anchored on carbon nanotubes nanocomposite for overall water splitting

Correction to: High-Index-Faceted Ni3S2 Branch Arrays as Bifunctional Electrocatalysts for Efficient Water Splitting

Correction: α-Fe2O3/TiO2 3D hierarchical nanostructures for enhanced photoelectrochemical water splitting

Correction: Iron-doping-enhanced Photoelectrochemical Water Splitting Performance of Nanostructured WO3: a Combined Experimental and Theoretical Study.

Correction: Porous RuO 2 -Co 3 O 4 /C nanocubes as high-performance trifunctional electrocatalysts for zinc–air batteries and overall water splitting

Correction: Carbon Quantum Dots As a Visible Light Sensitizer to Significantly Increase the Solar Water Splitting Performance of Bismuth Vanadate Photoanodes

Corrigendum: Nitrogen-Doped Carbon Embedded MoS2 Microspheres as Advanced Anodes for Lithium- and Sodium-Ion Batteries.

Correction: Novel electrode material based on coral-like cerium orthoferrite (CeFeO 3 ) for efficient alkaline water splitting

Facile Fabrication of Integrated Three-Dimensional C-MoSe 2 /reduced Graphene Oxide Composite with Enhanced Performance for Sodium Storage

Erratum to: Isolated atomic catalysts encapsulated in MOF for ultrafast water pollutant treatment

Facile fabrication of integrated three-dimensional CMoSe<sub>2</sub>/reduced graphene oxide composite with enhanced performance for sodium storage (vol 9, pg 1618, 2016)

Correction: Synthesis of template-free magnetite nanospheres grown on Sb 2 WO 6 hierarchical structures for sunlight-driven photo-Fenton catalysis of organic pollutants

Correction to: Bismuth Yttrium Oxide (Bi3YO6), A New Electrode Material For Asymmetric Aqueous Supercapacitors

Erratum: Zhang, C. et al., The Effect of Substrate Biasing during DC Magnetron Sputtering on the Quality of VO2 Thin Films and Their Insulator–Metal Transition Behavior. Materials 2019, 12, 2160

Erratum: Synthesis, Characterization, and Analysis of Hybrid Carbon Nanotubes by Chemical Vapor Deposition: Application for Aluminum Removal. Polymers 2020, 12, 1305

Corrigendum: Modifying SnS2 with carbon quantum dots to improve photocatalytic performance for Cr(VI) reduction