Abstract:Lithium-sulfur (Li-S) batteries are a promising candidate for next-generation energy storage owing to the high theoretical capacity of sulfur (1,675 mAh g −1 ). However, the intrinsically low electrical conductivity of sulfur and complex multistep electrolyte-mediated redox reactions involving soluble lithium polysulfide intermediates engender critical challenges toward practical realization. Specifically, migration and diffusion of higher-order lithium polysulfides provokes continuous loss of active sulfur species, yielding premature capacity fade. Electrochemical kinetics also remain sluggish due to the insulating nature of sulfur cathodes, which require engineering designs to accelerate charge transfer. Rational morphological and compositional cathode tuning represents a compelling strategy for addressing fundamental Li-S limitations. Herein, we develop an extended cathode architecture composed of a porous carbon nanotube network decorated with homogenously dispersed nanocatalysts. Electron microscopy and spectroscopy analysis verify platinum group metals are well-incorporated both within internal channels and external surface sites of conductive carbon nanotubes. The composite framework affords multifaceted functionality arising from synergistic chemical and structural attributes of components. Nanocatalyst sites demonstrate a pronounced chemical affinity toward soluble polysulfide intermediates, effectively localizing them within cathode, minimizing diffusional losses toward the anode. This anchoring phenomenon is complemented by the inherent microporosity of the high-surface-area nanotube network, further obstructing polysulfide migration through a confinement effects. Concurrently, noble metal nanoparticles facilitate the redox conversion of trapped higher-order polysulfides into solid Li 2 S alleviating the precipitation of electrically insulating discharge products. The excellent electrical conductivity of CNTs ensures efficient charge transport to all incorporated sulfur active materials, further maximizing reversible utilization. As a result of complementary polysulfide confinement and electrocatalytic conversion functionalities, Li-S coin cells exhibit enhanced reversible capacities exceeding 900 mAh g −1 for over 500 cycles at 0.558 A g −1 . Notably, over 500 cycles, minimal capacity decay of 0.018% per cycle and 92% retention of the initial capacity are obtained at moderate sulfur loadings highlighting the exceptional cycling stability enabled by engineered cathodes. Outstanding rate performance is also demonstrated with the delivery of 854 mAh g −1 capacity at a very high current density of 1.675 A g −1 . Our rationally designed cathode architecture provides critical mechanistic insight toward addressing fundamental bottlenecks to progress Li-S technologies.

Degradation mechanisms of lithium sulfide (Li2S) composite cathode in carbonate electrolyte and improvement by increasing electrolyte concentration

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

A High-Energy Sulfur Cathode in Carbonate Electrolyte by Eliminating Polysulfides Via Solid-Phase Lithium-Sulfur Transformation

Enhanced Sulfur Transformation by Multifunctional FeS2/FeS/S Composites for High‐Volumetric Capacity Cathodes in Lithium–Sulfur Batteries

A novel insight into deterioration of heavily sulfur-loaded cathode in Li-S battery

Linking Solid Electrolyte Degradation to Charge Carrier Transport in the Thiophosphate‐Based Composite Cathode toward Solid‐State Lithium‐Sulfur Batteries

Facile Synthesis of Porous Li2S@C Composites As Cathode Materials for Lithium–sulfur Batteries

Transition-Metal Sulfides for High-Performance Lithium Sulfide Cathodes in All-Solid-State Lithium-Sulfur Batteries

Porous Fe2O3 Doped Cathodes for Lithium-Sulfur Batteries

Sulfur-Rich Polymers Based Cathode with Epoxy/Ally Dual-Sulfur-Fixing Mechanism for High Stability Lithium–Sulfur Battery

Regulating and Understanding the Compatibility of Sulfide Composite Solid-State Electrolyte in Nickel-Rich Lithium Metal Batteries

Synergistic Electrocatalyst-Cathode Architecture for Stable Long-Term Cycling Lithium-Sulfur Batteries

Improvement of Lithium-Sulfur Battery Performance by Porous Carbon Selection and LiFSI/DME Electrolyte Optimization.

Insight into the Fading Mechanism of the Solid‐Conversion Sulfur Cathodes and Designing Long Cycle Lithium–Sulfur Batteries

High-Rate and Long-Term Cycle Stability of Li-S Batteries Enabled by Li2S/TiO2-Impregnated Hollow Carbon Nanofiber Cathodes.

Nickel Hydroxide-Modified Sulfur/Carbon Composite as a High-Performance Cathode Material for Lithium Sulfur Battery.

Good Cycling Stabilities of Sn/SnO2/C/S Composite Electrodes with Introduced Active Tin Atoms in Li-S Batteries

Superhigh Coulombic Efficiency Lithium–Sulfur Batteries Enabled by In Situ Coating Lithium Sulfide with Polymerizable Electrolyte Additive

A Polymorphic FeS 2 Cathode Enabled by Copper Current Collector Induced Displacement Redox Mechanism

Metallic and Polar Co 9 S 8 Inlaid Carbon Hollow Nanopolyhedra As Efficient Polysulfide Mediator for Lithium−sulfur Batteries

The Electrochemical Characteristics of Sulfur Composite Cathode