Abstract:Silica (SiO2) is considered as a promising candidate anode material for next-generation lithium-ion batteries (LIBs) owing to its low cost, abundant reserve on Earth, and relatively high theoretical specific capacity. However, the development of SiO2-based anode materials has been impeded by their poor electrical conductivity and sluggish charge-transfer kinetics. Herein, porous SiO2/tin (SiO2@Sn) composites with tunable SiO2 to Sn molar ratios are fabricated using a scalable, simple, and low-cost ball-milling and low-temperature thermal-melting combined method. It is found that the Sn phase can significantly improve the diffusion and migration kinetics of Li in the composites, whereas the SiO2 to Sn molar ratio plays a key role in the mechanical integrity and subsequent cycling behaviors of the composite electrodes. By optimizing the molar ratio of SiO2/Sn to 10:1, the synergistic effect of Li storage between SiO2 and Sn can lead to the simultaneous achievement of improved Li kinetics and ensured mechanical integrity, contributing to the excellent electrochemical performance of the composite with a large reversible capacity of 613 mAh g–1 at 100 mA g–1, a remarkable rate capability of 450 mAh g–1 retained at 1000 mA g–1, and long-term cycling durability with ∼95% capacity retention over 200 cycles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00023?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00023</a>.SEM image; CV curves; XPS spectra; cycling and rate performance of different samples; and description of chemo-mechanical simulation (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00023/suppl_file/ae1c00023_si_001.pdf">PDF</a>)Chemo-mechanical simulation of Li and effective stress evolutions in the blocks and on the cross sections of SiO2@Sn-10 and SiO2@Sn-1 electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00023/suppl_file/ae1c00023_si_002.avi">AVI</a>)This article has not yet been cited by other publications.

Good Cycling Stabilities of Sn/SnO2/C/S Composite Electrodes with Introduced Active Tin Atoms in Li-S Batteries

SnS2- Compared to SnO2-Stabilized S/C Composites Toward High-Performance Lithium Sulfur Batteries

Sulfur loads under high temperature on the surface of C/SnO 2 to enhance first platform capacity of lithium-sulfur batteries

Facile Synthesis of Porous Li2S@C Composites As Cathode Materials for Lithium–sulfur Batteries

A Novel Ternary Sulfur/carbon@tin Dioxide Composite with Polysulfides-Adsorptive Shell and Conductive Core As High-Performance Lithium‑sulfur Battery Cathodes

Preparation and properties of Sn composite C-coated Li4Ti5O12 materials for lithium–sulfur battery anodes

SnS2/SnO2 Heterostructures Towards Enhanced Electrochemical Performance of Lithium-Sulfur Batteries

Preparation of CoO/SnO2@NC/S composite as high-stability cathode material for lithium-sulfur batteries

Reduced expansion and improved full-cell cycling of a SnOx#C embedded structure for lithium-ion batteries

Atomically Dispersed Sn Incorporated into Carbon Matrix for Stable Electrochemical Lithium Storage

Advanced Sn/C composite anodes for lithium ion batteries

SnS@C nanoparticles anchored on graphene oxide as high-performance anode materials for lithium-ion batteries

Synergistic Lithium Storage in Silica–Tin Composites Enables a Cycle-Stable and High-Capacity Anode for Lithium-Ion Batteries

In situ chemically encapsulated and controlled SnS2 nanocrystal composites for durable lithium/sodium-ion batteries

A Bio‐Inspired Structurally‐Responsive and Polysulfides‐Mobilizable Carbon/Sulfur Composite As Long‐Cycling Life Li−S Battery Cathode

Good Cycling Stability and High Initial Efficiency Demonstrated in Full Cells with Limited Lithium Source for an Advanced SnO2–Co–C Composite Anode

Nickel Hydroxide-Modified Sulfur/Carbon Composite as a High-Performance Cathode Material for Lithium Sulfur Battery.

Metallic and Polar Co 9 S 8 Inlaid Carbon Hollow Nanopolyhedra As Efficient Polysulfide Mediator for Lithium−sulfur Batteries

Scalable Synthesis of SnS2/S-doped Graphene Composites for Superior Li/Na-ion Batteries

Enhanced electrochemical performance of mesoporous spherical SnS2/porous carbon composite prepared by dual-solvent hydrothermal method for lithium-ion batteries

Tin Disulfide Embedded on Porous Carbon Spheres for Accelerating Polysulfide Conversion Kinetics Toward Lithium-Sulfur Batteries.