Wettability Alteration to Reduce Water Blockage in Low-Permeability Sandstone Reservoirs

Gonzalo Mauricio Ceron Lopez,Matthew B. Myers,Quan Xie,Colin D. Wood,Duraid Al-Bayati,Ali Saeedi

DOI: https://doi.org/10.1007/s11242-023-01914-8

IF: 3.6097

2023-02-18

Transport in Porous Media

Abstract:This study is a continuation of our previous work, which focused on a near-wellbore water blockage alleviation by applying a thermally cured silane-functionalized benzoxazine to modify rock wettability. In this new analysis, we have demonstrated that the resin can be applied in low-permeability sandstones (approximately 15 mD as opposed to 100 to 200 mD in the previous study) to change the rock surface wettability from water-wet to intermediate gas-wet. We have also demonstrated that curing temperatures as low as 125 °C (as opposed to 180 °C in our previous study) can significantly change wettability, indicating surface functionalization through the silane moiety and ring-opening polymerization of the benzoxazine moiety. In drainage core flooding experiments at 2.5 wt.% resin loading, compared to untreated samples, brine recovery increments of 6.3 to 6.9% were obtained for curing temperatures of 125 to 180 °C, respectively. A maximum 20% increment in the end-point relative gas permeability was achieved at a curing temperature of 180 °C. A coupled experimental and numerical study, conducted at core and wellbore scales, demonstrates the potential effectiveness of our chemical treatment in improving gas productivity at the field scale. Reservoir simulations indicate a 2.9 to 10.6% improvement in gas deliverability for a treatment radius of 4 to 16 m, respectively.

engineering, chemical