Abstract:As a toxic pollutant, carbon monoxide (CO) usually causes harmful effects on human health. Therefore, the thermally catalytic oxidation of CO has received extensive attention in recent years. The CuO-based catalysts have been widely investigated due to their availability. In this study, a series of transition metal oxides (Fe2O3, Co3O4 and NiO) promoted CuO-based catalysts supported on the α-MnO2 nanowire catalysts were prepared by the deposition precipitation method for catalytic CO oxidation reactions. The effects of the loaded transition metal type, the loading amount, and the calcination temperature on the catalytic performances were systematically investigated. Further catalyst characterization showed that the CuO/α-MnO2 catalyst modified with 3 wt% Co3O4 and calcined at 400 °C performed the highest CO catalytic activity (T90 = 75 °C) among the investigated catalysts. It was supposed that the loading of the Co3O4 dopant not only increased the content of oxygen vacancies in the catalyst but also increased the specific surface area and pore volume of the CuO/α-MnO2 nanowire catalyst, which would further enhance the catalytic activity. The CuO/α-MnO2 catalyst modified with 3 wt% NiO and calcined at 400 °C exhibited the highest surface adsorbed oxygen content and the best normalized reaction rate, but the specific surface area limited its activity. Therefore, the appropriate loading of the Co3O4 modifier could greatly enhance the activity of CuO/α-MnO2. This research could provide a reference method for constructing efficient low-temperature CO oxidation catalysts.

Catalytic performance of CuCoO_x/TiO_2 for oxidation of carbon monoxide

The preparation and catalytic behavior of CuO/TixSn1-xO2 catalysts for low-temperature carbon monoxide oxidation

Catalytic oxidation of CO over CuO@TiO2 catalyst: The relationship between activity and adsorption performance

CO Oxidation over Co3O4/SiO2 Catalysts: Effects of Porous Structure of Silica and Catalyst Calcination Temperature

CuO Catalysts Supported on Porous TiO2 Microspheres for Low-Temperature CO Oxidation

Catalytic Performance of Manganese Doped CuO–CeO2 Catalysts for Selective Oxidation of CO in Hydrogen-Rich Gas

CuO/TiO 2 /Ti Monolithic Catalysts for Low-Temperature CO Oxidation

Effect of Preparation Methods on the Performance of Pt/TiO2 Catalysts for the Catalytic Oxidation of Carbon Monoxide in Simulated Sintering Flue Gas

CuO/TiO2/Ti Monolithic Catalysts for Low-Temperature CO Oxidation

Simple Solid Mixed Pt/TiO2-ZrO2 Catalyst for CO Oxidation with Excellent Sulfur and Water Resistance at Relatively Low Temperature

Transition Metal (fe2o3, Co3O4 and NiO)-Promoted CuO-Based Α-Mno2 Nanowire Catalysts for Low-Temperature CO Oxidation

Low temperature CO oxidation on Cu-Cu 2O/TiO 2 catalyst prepared by photodeposition

Preparation and Characterization of Ce<sub>0.3</sub>Ti<sub>0.7</sub>O<sub>2</sub> and Supported CuO Catalysts for NO+CO Reaction

Cu-doped Co3O4 Spinel on Cordierite Monolithic for Catalytic Oxidation of VOCs

Effect of Calcination Temperature on Surface Oxygen Vacancies and Catalytic Performance Towards CO Oxidation of Co3O4 Nanoparticles Supported on SiO2

Preparation,Characterization and Catalytic Performance of CuO/Mn_2O_3/γ-Al_2O_3 Catalysts over CO Oxidation

Evolution of CuOx/CeO2 Catalysts and Its Effect on CO Oxidation in H2-Rich Gases

Effect of Preparation Method and Calcination Temperature on Low-Temperature CO Oxidation over Co3O4/CeO2Catalysts

CO oxidation over CuOx/TiO2 catalyst: The importance of oxygen vacancies and Cu+ species

Low temperature oxidation of CO over CuO-Ce02 catalyst prepared by solid-stale chemical reaction

Low Temperature Oxidation of CO over CuO-CeO_2 Catalyst Prepared by Solid-State Chemical Reaction