Abstract:CuO/TiO2 and CuO-ZrO2/TiO2 catalysts with different CuO loadings were prepared by the impregnation method using Cu(NO3)2 and Ce(NO3)3 aqueous solutions of desired concentrations. The catalytic activities in NO+CO reaction were investigated, and the structural and reductive properties of various CuO/TiO2 and CuO-ZrO2/TiO2 catalysts were characterized by means of BET, TPR, XRD and NO-TPD technology. It was found that after treatment in H2 at 500°C for 2h, the catalytic activities were improved dramatically compared with treatment in normal air at 500°C for 2h. The NO conversion temperature (T99%) was 325°C for 6% CuO/TiO2 and 300°C for 6% CuO-10% ZrO2/TiO2, and their activities increased with increase in ZrO2 loading. There were four TPR peaks in CuO/TiO2 and two TPR peaks in CuO-ZrO2/TiO2, indicating that addition of ZrO2 caused changes in CuO species on TiO2. The air-treated catalysts displayed CuO diffraction peaks, whereas the H2-treated catalysts displayed Cu metal diffraction peaks. Four desorption species (NO, N2O, N2 and O2) were detected during the thermal desorption of NO by CuO/TiO2 and CuO-ZrO2/TiO2 treated in both air and H2. There were two adsorption states of nitric oxide (NO) on the catalyst’s surface, i.e. desorption species at low temperature on the weak sites and at high temperature on the strong sites. Addition of ZrO2 onto CuO/TiO2 shifted the NO dissociation peaks towards low temperature, which means that the activity of NO decomposition was higher by CuO-ZrO2/TiO2 than by CuO/TiO2. The NO+CO reaction formed intermediary product N2O at low temperature but formed N2 at high temperature. In addition, the peak temperature of NO desorption corresponded with the catalyst’s activity under both air and H2, and the dissociation of NO on catalyst surface was a rate-determining step in NO+CO reaction.

Catalytic oxidation of CO over CuO@TiO2 catalyst: The relationship between activity and adsorption performance

CO oxidation over CuOx/TiO2 catalyst: The importance of oxygen vacancies and Cu+ species

Effect of Pretreatment Atmosphere on CuO/TiO 2 Activities in NO + CO Reaction

Self-assembly of a Highly Stable and Active Co3O4/H-TiO2 Bulk Heterojunction with High-Energy Interfacial Structures for Low Temperature CO Catalytic Oxidation

Effect of Pretreatment Atmosphere on CuO/TiO2 Activities in NO + CO Reaction

CuO/TiO 2 /Ti Monolithic Catalysts for Low-Temperature CO Oxidation

Influence of CO pretreatment on the activities of CuO/γ-Al2O3 catalysts in CO + O2 reaction

Surface Structure Characteristics of CuO/Ti0.5Sn0.5O2 and Its Activity for CO Oxidation

Large-scale Synthesis and Catalytic Activity of Nanoporous Cu–O System Towards CO Oxidation

Unveiling the Promoting Mechanism of H2 Activation on CuFeOx Catalyst for Low-Temperature CO Oxidation

Fabrication of CuO/TiO 2 /Ti Monolithic Catalyst for Efficient and Stable CO Oxidation

Promoting effect of titanium on Cu/γ-Al2O3 catalyst for CO2 hydrogenation

Effect of the Preparation Method on the Performance of CuO–MnOx–CeO2 Catalysts for Selective Oxidation of CO in H2-rich Streams

Catalytic Activities of CuO/TiO2 and CuO-ZrO2/TiO2 in NO + CO Reaction

CO Oxidation over the Cu2O/CuO Hollow Sphere Heterojunction Catalysts with Enhanced Low-Temperature Activities

Activities Of Mo(M=Cu And Ni)/Tio2/Gamma-Al2o3 Catalysts In Co Oxidation

Promoting effect of titanium on Cu/gamma-Al2O3 catalyst for CO2 hydrogenation

High activity of CuO/#-Fe2O3 for low temperature CO oxidation: Effect of support crystal types in catalyst design

Preparation,Characterization and Catalytic Performance of CuO/Mn_2O_3/γ-Al_2O_3 Catalysts over CO Oxidation

Catalytic combustion of CO over Cu-doped iron oxides: CO2 effects on activity

High Performance CuO-CeO2 Catalysts for Selective Oxidation of CO in Excess Hydrogen: Effect of Hydrothermal Preparation Conditions