Abstract:The beam parameters of complete prototype of the bERLinPro injector that consisted of a lead cathode in an 1.6 cell superconducting cavity were measured. The measurements are discussed in chapter 2 and indicate that the beam emittance is governed by a multitude of contributions from the cathode and the injector. Cathodes for practical use must have a high enough QE to deliver the required current at moderate illumination intensities and be able to sustain the operation for several days. Alkali antimonides are good candidates for this purpose, as discussed in chapter 3.2. The preparation of such cathodes with QEs of a few percent in the visible range has been performed routinely but the details of the growth and the influence of process parameters on the cathodes properties are not well understood yet. A theoretical treatment of photoemission is presented, and expressions for quantum effciency and initial emittance of photocathodes are reviewed in section 3.1. In order to study Potassium Caesium Antimonide (K2CsSb) cathodes and their fabrication a preparation and characterization system has been developed at HZB. In section 3.2 this experimental setup is explained, details of the alkali antimonide cathodes are discussed, and the preparation of a caesium antimonide cathode is presented. Finally, chapter 4 focuses on the physics and engineering design of spectrometer that will resolve the initial transverse momentum of the photoelectrons released from cathode samples, the momentatron. It is installed in the analysis chamber of the cathode preparation system and allows in-situ characterization of the samples.

Thermal emittance measurements of a bi-alkali photocathode based on the high voltage DC photogun beamline

Performance of Bialkali Photocathode in DC-SRF Photoinjector

Experimental Investigation of Thermal Emittance Components of Copper Photocathode

First Beam Measurements of the S-Band Photocathode Radio-Frequency Gun at Tsinghua University

In-situ measurements of the intrinsic emittance of photocathodes for high brightness electron beams

Rapid Thermal Emittance and Quantum Efficiency Mapping of a Cesium Telluride Cathode in an Rf Photoinjector Using Multiple Laser Beamlets

Analytical Model and Simulation of the Schottky Effect on a Cryo-Cooled Bialkali Photocathode

Cold electron beams from cryo-cooled, alkali antimonide photocathodes

Multislit-Based Emittance Measurement of Electron Beam from a Photocathode Radio-Frequency Gun

Status of the photocathode RF gun at tsinghua university

Single shot cathode transverse momentum imaging in high brightness photoinjectors

High brightness CW electron beams from Superconducting RF photoemission gun

Slice emittance measurement for photocathode RF gun with solenoid scanning and RF deflecting cavity

Overestimation of Thermal Emittance in Solenoid Scans Due to Coupled Transverse Motion

Overview of the Semiconductor Photocathode Research in China

Development of an L-band Photocathode RF Gun at Tsinghua University

Research and Fabrication of the Photocathode Used in DC-SC Photocathode RF Electron Gun

Rf Measurement And High Power Test Of A Bnl/Kek/Shi Photocathode Rf Gun

High Performance Operation of a Direct-Current and Superconducting Radio-Frequency Combined Photocathode Gun

Transverse Phase Space Tomography Using a Solenoid Applied to a Thermal Emittance Measurement

Thermal Emittance Isolation by Cathode Retraction