Abstract:Thermoelectric has long been recognized as a promising technology due to its ability to harvest waste heat from different sources, such as the Sunlight, vehicles, and energy-intensive industries, and thereby convert it into electricity without emitting greenhouse gases, so providing distributed solutions for sustainable energy challenges and energy efficiency issues worldwide. Lead Telluride (PbTe) is the classic thermoelectric material; however, its applications are limited by its low efficiency. The goal of the present research is to improve the energy conversion efficiency of PbTe by mixing single-walled carbon nanotubes (SWCNTs) via simple powder processing and utilizing nanostructuring and quantum confinement effects in a synergistic way. PbTe based composites incorporating different vol% of SWCNTs were fabricated through the high-frequency induction heating furnace at ~450°C. Thermoelectric characteristics of bulk samples were tested at temperatures ranging from ~300 to ~530K. With the inclusion of nanotubes, the electrical conductivity behaviour changes from semi-metallic in pristine PbTe to semi-conducting in composites. This shows that the semiconducting nature of SWCNTs plays a major role in electrical transport. As a result, the composites’ effective electrical conductivities were lowered near room temperature, with the lowest values observed at 0.5 vol% of SWCNTs. When compared to pure PbTe, the Seebeck coefficient of the 0.5 vol% of PbTe composite improves at ambient temperature and gradually drops after ~375K. Thermal conductivity of all the composites reduces and substantial reduction was observed at 0.5 vol% of SWCNTs. The large transition from semi-metallic to semi-conducting transport in pristine PbTe to composites, as well as enhanced short-range carrier scattering, are responsible for lowering electrical conductivity and hence composites’ power factor. As a result, the significant reduction in thermal conductivities could not compensate for the loss of power factor, resulting in lower ZT values from pristine PbTe.

Carrier type control in cement-based thermoelectric composites with carbon nanotube and SrTiO 3 nanoparticles

Synergistic optimization of thermoelectric performance in cementitious composites by lithium carbonate and carbon nanotubes

Thermoelectric power factor of boron‐doped carbon nanotubes reinforced cementitious composites

Ionic Thermoelectric Effect and Mechanism of Cement-Based Materials

Significant Improvement in Thermoelectric Properties of Carbon-Reinforced Cementitious Composites Achieved by Regulating the Graphitization Degree of Expanded Graphite

Boosting power factor of thermoelectric cementitious composites by a unique CNT pretreatment process with low carbon content

Enhanced thermoelectric performance in n-type SrTiO3/SiGe composite.

Relationship Between the Thermoelectric Properties and Infrared Emissivity of Nb-Doped TiO2

High performance of p-type and n-type thermoelectric materials based on liquid crystal mixture and single-walled carbon nanotube composites

Mixed “Ionic-Electronic” Thermoelectric Effect of Reduced Graphene Oxide Reinforced Cement-Based Composites

Thermoelectric properties of cement composite analogues from first principles calculations

The combined effect of carbon fiber and carbon nanotubes on the electrical and self-heating properties of cement composites

Enhancement of thermoelectric properties in Sr0.7Ba0.3Nb2O6−δ-based ceramics via nano-sized Ti as additive

Thermoelectric Properties of TiS2-xPbSnS3 Nanocomposites

Enhancing the thermoelectric characteristics of thermoelectric cement matrix composites by (Ca0.87Ag0.1La0.03)3Co4O9 binary metal oxide

Enhanced thermoelectric and compressive performance of MnO 2 coated carbon fiber/cement composites by microwave electrodeposition/microwave alkali treatment

Achieving thermoelectric properties of ultra-high-performance concrete using carbon nanotubes and fibers

Thermoelectric Properties of PbTe Based Single-Walled Carbon Nanotube (SWCNT) Composites

Composite of carbon dots and TiNiSn thermoelectric materials: Initial investigation on the electrical and thermal transport properties

Enhanced Thermoelectric Performance of Xmos2–tis2 Nanocomposites

Prediction and evaluation of thermal conductivity in nanomaterial-reinforced cementitious composites