Abstract:Building structures are exposed to direct sunlight for a long time, accumulating a large amount of low-grade thermal energy, which aggravates environmental pollution and energy consumption. Thermoelectric cement-based composites can realize the interconversion of thermal and electrical energy, showing great potential benefits in large-scale heat collection and energy conversion. Although a lot of exploration and research has been carried out on the thermoelectric properties of cement-based composites reinforced with carbon materials, the contribution of the characteristics of carbon materials, such as the graphitization degree, to the thermoelectric properties of cement-based composites is still unclear. In this article, the graphitization degree of expanded graphite (EG) was modulated by etching EG with an acid solution. The low graphitization degree improves the effective mass of carriers and aggravates the electron and phonon scattering at the interface of EG/cement-based composites. Low thermal conductivity was obtained while increasing the Seebeck coefficient of EG/cement-based composites. The power factor (17.1 μW m-1 K-2) and thermoelectric figure of merit (2.95 × 10-3) of the sample are increased by 18.6 times and 44.2 times, respectively, achieving the highest thermoelectric performance in cement-based composites reinforced with carbon materials. This study provides a direction for improving the thermoelectric properties of cement-based composites by structural regulation of carbon materials.

Enhanced thermoelectric and compressive performance of MnO 2 coated carbon fiber/cement composites by microwave electrodeposition/microwave alkali treatment

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

Synergistic optimization of thermoelectric performance in cementitious composites by lithium carbonate and carbon nanotubes

Al2O3f/Al2O3 composites with high bending strength prepared via a MnO2 modified slurry impregnation method

Boosting power factor of thermoelectric cementitious composites by a unique CNT pretreatment process with low carbon content

The combined effect of carbon fiber and carbon nanotubes on the electrical and self-heating properties of cement composites

Enhanced thermoelectric performance of low carbon cement-based composites by reduced graphene oxide

Characterization of a manganese dioxide/carbon nanotube composite fabricated using an in situ coating method

Effect of MnCO3 on Eliminating Al2TiO5 Phase and Dielectric Properties of 0.90Al2O3–0.10TiO2 Composite Ceramics

Preparation of MnO2@CNFs Composites and Their Tunable Microwave Absorption Properties

Significant Improvement in Thermoelectric Properties of Carbon-Reinforced Cementitious Composites Achieved by Regulating the Graphitization Degree of Expanded Graphite

Effect of temperature on the pseudo-capacitive behavior of freestanding MnO2@carbon nanofibers composites electrodes in mild electrolyte

Influence of Iron Concentration and Post-Annealing Temperature on Structure and Pseudocapacitive Characteristics of a MnO 2 –fe 2 O 3 Nanocomposite

Microwave heating oxidative stabilization of KMnO4 modified polyacrylonitrile-based carbon fiber precursor

Preparation of MnO<sub>2</sub>@CNFs composites and their tunable microwave absorption properties

Low carbon footprint preparation of MXene incorporated lignocellulosic fibers for high thermal conductivity applications

Influence of iron concentration and post-annealing temperature on structure and pseudocapacitive characteristics of a MnO2–Fe2O3 nanocomposite

MnO2 on eliminating Al2TiO5 and promoting microwave dielectric properties of 0.90Al2O3–0.10TiO2 composite ceramics

Low-temperature synthesis of manganese oxide–carbon nanotube-enhanced microwave-absorbing nanocomposites

Mixed “Ionic-Electronic” Thermoelectric Effect of Reduced Graphene Oxide Reinforced Cement-Based Composites

Multiscale carbon nanosphere–carbon fiber reinforcement for cement-based composites with enhanced high-temperature resistance