Abstract:MnO 2 is an attractive material owing to its high specific capacitance, excellent electrochemical activity, thermal and chemical stability, environmental benignity and broad potential window. However, its poor electrical conductivity limits its performance in supercapacitor applications. The electrical conductivity of MnO 2 can be enhanced by making its composites with carbon nanomaterials as these offer superior electrical conductivity and high specific surface area. The present study is a comparative study on the effect of various types of carbon nanomaterials such as carbon nanotubes (CNTs), graphene oxide, thermally reduced graphene oxide, activated carbon and carbon nanofibers on the supercapacitive performance MnO 2 electrodes by making composite electrodes. MnO 2 was synthesized by a facile chemical reduction method, and calcination was performed at 200 °C to obtain amorphous state. MnO 2 -based composite electrodes were prepared using 10 wt.% of various carbon nanomaterials. Characterization of different carbon materials was carried out by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and atomic force microscopy. Composite electrodes were prepared by coating mixture, consisting of MnO 2 , carbon nanomaterials, carbon black and polyvinylidene fluoride on the surface of highly porous Ni foam using a high-speed vacuum planetary centrifugal mixer. Electrochemical characterization of the prepared electrodes was performed by cyclic voltammetry, galvanostatic charge discharge (GCD) and electrochemical impedance spectroscopy (EIS). GCD revealed that MnO 2 -CNTs composite electrodes showed maximum specific capacitance (SC) of 330 F/g at 1 A/g current density and areal capacitance of 3.16 F/cm 2 with 5–7 mg mass loading of active material in 3 M KOH as an aqueous electrolyte. This SC was ca. 79% higher than pure MnO 2 and also higher than previously reported MnO 2 /CNTs composite electrodes. MnO 2 -CNTs symmetric supercapacitor device showed excellent SC of 177 F/g at 1 A/g current density with 94% charge retention after 1000 GCD cycles. EIS analysis showed that MnO 2 -CNTs composite electrode had the lowest charge transfer resistance compared to other electrodes.

Characterization of a manganese dioxide/carbon nanotube composite fabricated using an in situ coating method

Mn0.5Co2.5O4 Nanofibers Intercalated into Graphene Frameworks with Mesoporous Structure for Batteries and Supercapacitors

Preparation and Characterization of MnO2/acid-treated CNT Nanocomposites for Energy Storage with Zinc Ions

MnO Nanoparticle@Mesoporous Carbon Composites Grown on Conducting Substrates Featuring High-performance Lithium-ion Battery, Supercapacitor and Sensor

Electrochemical Property of Carbon Micro-coils/MnO2 Composites

Effect of Carbon Nanotubes Functionalization on the Chemical Composition and Electrochemical Characteristics of Composites with Layered Potassium Manganese Oxide

Incorporation of nanostructured manganese dioxide into carbon nanofibers and its electrochemical performance

Enhancement of the electrocapacitive performance of manganese dioxide by introducing a microporous carbon spheres network

MnO 2 /Porous Carbon Nanotube/MnO 2 Nanocomposites for High-Performance Supercapacitor

Role of Carbon Nanomaterials on Enhancing the Supercapacitive Performance of Manganese Oxide-Based Composite Electrodes

A Novel Composite for Energy Storage Devices: Core–shell MnO 2 /polyindole Nanotubes Supported on Reduced Graphene Oxides

Manganese hexacyanoferrate/multi-walled carbon nanotubes nanocomposite: Facile synthesis, characterization and application to high performance supercapacitors

Nanostructured Manganese Oxides and Their Composites with Carbon Nanotubes As Electrode Materials for Energy Storage Devices

Optimal Synthesis of Manganese Oxide/Carbon Sphere Hybrids through a Chemical Deposition Process

Optimization of manganese dioxide-multiwall carbon nanotube composite electrodes for supercapacitor applications

Enhanced Electrochemical Performance of Mn3O4/Multiwalled Carbon Nanotube Nanocomposite for Supercapacitor Applications

Preparation and electrochemical property of manganese oxide/carbon composites

Carboxylated multi-walled carbon nanotube/polyaniline composites for high-performance supercapacitor electrodes

Chemical coupling of manganese-cobalt oxide and oxidized multi-walled carbon nanotubes for enhanced lithium storage

Innovative Core–Shell Tubular Structure in Polymer/Manganese–Nickel Oxide/Carbon Nanotube Blends for Electrochemical Components

Factors influencing MnO2/multi-walled carbon nanotubes composite's electrochemical performance as supercapacitor electrode