Abstract:The success of next-generation lithium-ion batteries (LIBs) fundamentally depends on the rational design of not only the microstructure of an individual component but the component assembling structures on the electrode level. However, building advanced assembling structures for especially high-capacity electrodes is an urgent but a challenging task due to the lacking of in-depth understanding and effective strategies. Here, we propose a functional nanocoating biobinder using the well-known poly(lactic acid) to address the above need. It is found that the composite electrodes with this nanocoating biobinder are upgraded with uniform and robust assembling structures, including the electron-transportation network, ion-transportation network, and interfaces. Importantly, the nanocoating finally works as a new type of polymeric artificial cathode electrolyte interphase (poly-CEI) to protect the active particles. Therefore, a remarkable improvement in the electrochemical performance has been achieved for high-capacity electrodes (LiFePO4, lithium nickel cobalt manganite (NCM), and lithium nickel cobalt aluminum acid (NCA)). In particular, the LFP cathode can deliver a high discharge capacity of 74.6 mA h g–1 at 10C and a high capacity retention of 95.5% even after 850 cycles at 2C. For NCA and NCM cathodes, the cycling stability is dramatically improved due to the protection by the poly-CEI. In short, this study may reshape the essential roles of a binder in composite electrodes by highlighting its critical link to assembling structures.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16589?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16589</a>.Experimental methods; additional EDS; SEM and TEM images; additional DSC heating curves of pure PLLA and PVDF and composite electrodes and the corresponding discussions; peeling strength between the binder film and the Al foil; digital photographs of bended electrodes; CV of PLLA-AB and PVDF-AB films; Z'-ω-1/2 plots and linear fitting of the low-frequency regions obtained from the EIS of the electrodes before and after cycling, additional cycle, and C-rate performance for the samples; XPS spectra of Fe 2p and P 2p for the pristine PLLA- and PVDF-based electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16589/suppl_file/am0c16589_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cooperation between Active Material, Polymeric Binder and Conductive Carbon Additive in Lithium Ion Battery Cathode

The Effects of Various Conductive Additive and Polymeric Binder Contents on the Performance of a Lithium-ion Composite Cathode

A Balancing Act: Experimental Insights into the Volume Fraction of Conductive Additive in Lithium-Ion Battery Electrodes

Optimized NMC622 electrodes with a high content of the active material: A comprehensive study

An Alternative Polymer Material to PVDF Binder and Carbon Additive in Li-Ion Battery Positive Electrode.

A novel polymer composite as cathode binder of lithium ion batteries with improved rate capability and cyclic stability

A Formula to Customize Cathode Binder for Lithium Ion Battery

Influence of Conductive Additives and Binder on the Impedance of Lithium-Ion Battery Electrodes: Effect of Morphology

Biobinder Nanocoating for Upgrading the Assembling Structures of High-Capacity Composite Electrodes with a Robust Polymeric Artificial Solid Electrolyte Interphase

New Insights into the Mechanism of Enhanced Performance of Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 with a Polyacrylic Acid-Modified Binder

Multifunctional Additives for High-Energy-Density Lithium-Ion Batteries: Improved Conductive Additive/Binder Networks and Enhanced Electrochemical Properties

The Effect of Different Amounts of Conductive Carbon Material on the Electrochemical Performance of the LiFePO4 Cathode in Li-Ion Batteries

Effect of poly (acrylic acid)/Poly (vinyl alcohol) blending binder on electrochemical performance for lithium iron phosphate cathodes

A Review: Carbon Additives in LiMnPO4- and LiCoO2-Based Cathode Composites for Lithium Ion Batteries

Cathode Performance as a Function of Inactive Material and Void Fractions

Toward Greener Lithium-Ion Batteries: Aqueous Binder-Based LiNi0.4Co0.2Mn0.4O2 Cathode Material with Superior Electrochemical Performance

Influence of Conductive Additives and Binder on the Impedance of Lithium-Ion Battery Electrodes: Effect of an Inhomogeneous Distribution

Analyzing the Effect of Nano-Sized Conductive Additive Content on Cathode Electrode Performance in Sulfide All-Solid-State Lithium-Ion Batteries

A Ternary Polyaniline/Active Carbon/Lithium Iron Phosphate Composite as Cathode Material for Lithium Ion Battery.

Investigating the Coating Effect on Charge Transfer Mechanisms in Composite Electrodes for Lithium-Ion Batteries

Concerted Effect of Ion- and Electron-Conductive Additives on the Electrochemical and Thermal Performances of the LiNi0.8Co0.1Mn0.1O2 Cathode Material Synthesized by a Taylor-Flow Reactor for Lithium-Ion Batteries