Abstract:Accelerating hydrogen (H2) deployment via renewable electricity is a key G7 strategy for sustainable transitions in hard-to-decarbonize sectors (e.g., circular-plastics, -steel, -fertilizers,shipping, and aviation) therefore, Alkaline (AWE) and Polymer Electrolyte Membrane water electrolysis (PEMWE) play a crucial role amongst low-temperature power-to-X technologies for establishing a hydrogen network. Assuming all hydrogen will be green by 2030 (with ca. 150 million metric tons), a significant increase in electrolyser capacity to 3,000 gigawatts is necessary, given the current capacity of 0.3 gigawatts. However, the adoption of electrolysers faces a bottleneck due to scarce platinum group materials (PGMs) used as catalyst, specifically Iridium and Platinum. The commercial PGM loading per membrane electrode assembly (MEA) is at 3 mg/cm2, requiring substantial efforts to redesign electrocatalyst materials through a nano-architecture, necessitating a thousandfold increase in surface area (μm to nm scale) and a tenfold reduction in mass loading (mg to μg). The realization of this objective is conceivable through innovative surface engineering and manufacturing techniques, exemplified by. VSPARTICLE is actively advancing its manufacturing technology for green H2, bridging academia and industry . We developed a unique nano-printing technology which utilizes spark ablation for generating nano-porous electrocatalyst thin films across diverse elements and alloys. Unlike traditional methods, it eliminates the need for chemical precursors or binders, reducing waste and extra pre- / post-process steps. The VSP-P1 nano-printer serves as a crucial R&D tool for dry-synthesis, enabling both the production of complex electrocatalyst layers and also sample arrays high-throughput screening. This accelerates the discovery of new catalysts, fostering the creation and application of novel nanomaterials in specialized setups. Our oral presentation will unveil the latest findings concerning oxygen evolution electrodes, employing Ir-based and Ni-based catalysts produced through the innovative VSP-P1 nano-printing technology, which exhibit notable activity in acidic and alkaline water electrolysis, respectively, even at low loadings, such as 0.4 mg/cm2. Therefore, our oral presentation aims to show the latest findings on accelerated electrocatalysts discovery concerning oxygen evolution reaction (OER) produced through the innovative VSP-P1 nano-printing technology. In parallel to comprehensive flow-cell experiments, meticulous control tests and characterization techniques (XRD, XRF, HR-SEM) on proxy samples were conducted, leveraging the versatility of VSP-P1 to create identical nano-porous films on various substrates such as Si-wafer, conductive glass, and glassy carbon disks. The scalability of this dry manufacturing process, coupled with the rapid iteration capability for tuning material parameters and test-beds, promises a tenfold acceleration in electrocatalyst utilization. In summary, this presentation intends to reveal a methodology that not only shows an efficient strategy for catalyst utilization through nano-printed layers, but also shortens the time required to bring novel materials to market. Figure 1

Can 3D-printed catalysts improve hydrogen peroxide thruster performance? An experimental and numerical study

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

Tailored monolithic catalyst and reactor by direct photo-curing 3D printing for oxidative desulfurization of fuels

Stereolithography 3D printed monolithic catalyst for highly efficient oxidative desulfurization of fuels

Carbon-Free H2 Production from Ammonia Decomposition over 3D-Printed Ni-Alloy Structures Activated with a Ru/Al2O3 Catalyst

Borohydride Hydrolysis Using a Mechanically and Chemically Stable Aluminium‐Stainless Steel Porous Monolith Catalyst Made by 3D Printing

3D‐Printed Structured Reactor with Integrated Single‐Atom Catalyst Film for Hydrogenation

Towards unconstrained catalyst shaping: high accuracy DLP printing of porous γ-Al2O3-based catalysts

Preparation and Performance Evaluation of Platinum Barium Hexaaluminate Catalyst for Green Propellant Hydroxylamine Nitrate Thrusters

A Novel Method of 3D Printing High‐Loaded Oxide/H‐ZSM‐5 Catalyst Monoliths for Carbon Dioxide Reduction in Tandem with Propane Dehydrogenation

3D Printing and Chemical Dealloying of a Hierarchically Micro- and Nanoporous Catalyst for Wastewater Purification

Fabrication of Porous Hydrogenation Catalysts by a Selective Laser Sintering 3D Printing Technique

Microstructure of highly effective platinum–iridium alloys as catalysts for hydrogen peroxide decomposition

3D printed textured substrate with ZnIn 2 S 4 –Pt–Co thermoset coating for photocatalytic hydrogen evolution

Three-Dimensional Printing of “Green” Fuels for Low-Cost Small Spacecraft Propulsion Systems

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

A Homogeneously Catalyzed Micro-Chemical Thruster

Highly Active Nano-Porous Thin-Films for Water Electrolysis Using an Automated Print Technology Based on Spark Ablation

Effect of catalytic bed porosity and mass flow rate on decomposition and combustion processes of a HAN-Based monopropellant thruster

Three-Dimensional Hierarchical Porous Structures of Metallic Glass/Copper Composite Catalysts by 3D Printing for Efficient Wastewater Treatments