Abstract:A kind of natural, sustainable, and abundant biomass, chitin, is used as support to load palladium nanoparticles catalyst (Pd–chitin) for the transfer hydrogenation of phenolic compounds to ketones in HCOONa solution. The appropriate reduction temperature in hydrogen atmosphere is a key factor to improve the coordination between oxygen-containing groups and palladium nanoparticle, which prevents palladium nanoparticles leaching during the reaction so that Pd–chitin-150 exhibits good recycling stability. More importantly, Pd–chitin-150 can be fabricated into a PTFE tube with 2 mm inner diameters as a kind of monolithic catalyst, achieving the continuous production of cyclohexanone by feeding the mixture of phenol and HCOONa solution. The functions of sodium introduced during the preparation of catalyst are researched by H<sub>2</sub>-TPR, CO–DRIFT, and DFT calculations, which facilitate the reduction of palladium and increase the catalytic activity for phenol hydrogenation and selectivity to cyclohexanone.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c04751?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c04751</a>.Table S1 (ICP-OES results), Figure S1 (kinetics of phenol hydrogenation), Figure S2 (nitrogen adsorption–desorption isotherms), Figure S3 (TEM images of Pd–chitin–NaBH<sub>4</sub>), and Table S2 (catalytic performance of different catalysts) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c04751/suppl_file/sc0c04751_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly Selective Hydrogenation of Phenols to Cyclohexanone Derivatives Using a Palladium@N-Doped Carbon/SiO 2 Catalyst

Honeycomb-like Porous Ce–Cr Oxide/n-Doped Carbon Nanostructure: Achieving High Catalytic Performance for the Selective Oxidation of Cyclohexane to KA Oil

Enhanced Selectivity of Phenol Hydrogenation in Low-Pressure CO2 over Supported Pd Catalysts

Highly selective hydrogenation of phenol and derivatives over a Pd@carbon nitride catalyst in aqueous media.

Preparation and Catalytic Performance of Metal-Rich Pd Phosphides for the Solvent-Free Selective Hydrogenation of Chloronitrobenzene

ChemInform Abstract: Highly Selective Hydrogenation of Phenol and Derivatives over a Pd@Carbon Nitride Catalyst in Aqueous Media.

Highly Selective Pd@mpg-C3N4 Catalyst for Phenol Hydrogenation in Aqueous Phase

Highly selective hydrogenation of phenol to cyclohexanone over a Pd-loaded N-doped carbon catalyst derived from chitosan

Selective Hydrogenation of Phenol to Cyclohexanone over Pd–HAP Catalyst in Aqueous Media

Selective Hydrogenation of Phenol to Cyclohexanone in Water over Pd Catalysts Supported on Amberlyst-45

Space-Confined Carbon-Doped Pd Nanoparticles as a Highly Efficient Catalyst for Selective Phenol Hydrogenation

Selective Hydrogenation of Phenol to Cyclohexanone in Water over Pd@N‐Doped Carbon Derived from Ionic‐Liquid Precursors

Regulating the electronic state of Pd nanoclusters and Lewis acid density by the carbon doping for synergistically enhancing phenol hydrogenation in green solvent

Preparation and Application of the Bifunctional Pd/ZrHP Catalyst for Selective Hydrogenation of Phenol

Selective Hydrogenation of Phenol to Cyclohexanone over Small Amount of Ru-promoted Pd/ZrHP Catalysts

Highly efficient hydrogenation of phenol to cyclohexanol over Ni-based catalysts derived from Ni-MOF-74

Palladium Nanoparticles Anchored on Sustainable Chitin for Phenol Hydrogenation to Cyclohexanone

Switchable cyclohexanone/cyclohexanol selectivity in room temperature aqueous hydrogenations of phenol using Au–Pd nanoparticles supported on a bimodal cubic N,S-doped mesoporous carbon

Selective Hydrogenation of Phenol to Cyclohexanol over Ni/CNT in the Absence of External Hydrogen

Chemoselective hydrogenation of phenol to cyclohexanol using heterogenized cobalt oxide catalysts

Hydrogenation Of Phenol And Cresols Catalyzed By Chitosan Supported Palladium Complex At Mild Conditions