Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

Investigation of electric conditions in the vicinity of carbon nanotubes grown in a DC plasma sheath

Quantitative analysis of electron field-emission characteristics of individual carbon nanotubes: The importance of the tip structure

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Plasma Enhanced Chemical Vapour Deposited Carbon Nanotubes for Field Emission Applications

Plasma Composition During Plasma-Enhanced Chemical Vapor Deposition of Carbon Nanotubes

Investigation of Pulsed Field Electron Emission from Carbon Nanotube Thin Films

Modeling and calculation of field emission enhancement factor for carbon nanotubes array

Super-low Turn-on and Threshold Electric Fields of Plasma-Treated Partly Fe-filled Carbon Nanotube Films

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Calculation of Field Enhancement Factor of the Carbon Nanotube Array

In Situ Study of Field Emission Vacuum Breakdown of Individual Multi-Wall Carbon Nanotube

Carbon Nanotubes And Their Potential Field Emission Applications

Growth and Field Emission of Coiled Carbon Nanotubes by Plasma-Enhanced Chemical Vapor Deposition

Electric-Field-Direction Dependent Spatial Distribution of Electron Emission along Electrically Biased Carbon Nanotubes

Characterization of Plasma-Enhanced Chemical Vapor Deposition Carbon Nanotubes by Auger Electron Spectroscopy

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission

Investigation of Carbon Nanotube Deposits and Their Formation Conditions by an Arc-Plasma Method in Water

Electron Field Emission Characteristics and Field Evaporation of a Single Carbon Nanotube.

Non-Equilibrium Field Electron Emission from Carbon Nanotubes

Investigation of Field Emission Properties of Carbon Nanotube Arrays of Different Morphologies