Abstract:Morphing wing technology is crucial for enhancing the flight performance of aircraft. To address the monitoring challenges of full-scale variable-camber leading edges under flight conditions, this study introduces a ground-based strength testing technique aimed at precisely evaluating the deformation patterns and structural strength during actual operation. Firstly, the motion characteristics of the variable-camber leading edge were analyzed using numerical simulation based on kinematic theory. Secondly, a tracking loading test rig was designed and constructed to simulate the actuated deformation and aerodynamic loads of the leading edge. Next, mechanical boundary numerical simulation was then utilized to predict the motion trajectories of loading points on the upper and lower wing surfaces, and a multi-point coordinated control system was developed to achieve accurate experimental control. Finally, a multi-sensor iterative method was employed to ensure loading precision throughout the testing process. A case study was conducted using a leading edge test piece from a specific commercial aircraft. The results indicated that in the motion test of the variable-camber leading edge, the average error of the deflection angle was 4.59%; in the strength test, the average errors in the magnitude and direction of the applied load were 0.54% and 0.24%, respectively. These findings validate the effectiveness of the proposed technique in simulating the flight conditions of deforming wings and accurately obtaining the leading edge shape change curve, deformation accuracy curve, and strain curves of the upper and lower wing surfaces under deflection angles. Furthermore, this paper compares the deformation accuracy of different testing methods under test conditions, providing scientific evidence and technical support for the testing and evaluation of variable-camber leading edges.

Flight Test Technology Research on Crosswind Takeoff and Landing of Civil Airplane

Progress in the Airworthiness Technology of Civil Aero-Engine

Present Research Status and Prospective Application of Wind-Tunnel Free-Flight Test Technique

Similarity criteria and simulation method for flight control system of free-flight test in low speed wind tunnel

Study on the Crashworthiness Performance of A Cargo Hold Support Column of A Civil Aircraft

Design and static testing of wing structure of a composite four-seater electric aircraft

Experimental research on fatigue performance of aero-structure under two combined loads

Take-off Control and Characteristics of FanWing

Numerical Simulation and Experimental Study on the Aerodynamics of Propulsive Wing for a Novel Electric Vertical Take-Off and Landing Aircraft

Research of a novel aerodynamic evaluation method for fixed-wing UAV

Numerical Study of a Supercritical Airfoil/wing with Variable-Camber Technology

Landing Impact Load Analysis and Validation of a Civil Aircraft Nose Landing Gear

Rapid prototyping and implementation of flight control system for wind tunnel virtual flight test

Study on Ground-Test Simulation Method of the Ram Air for Commercial Airliners’ Environmental Control System

Study on experiment platform for flight control system of general aircraft

Flight Test of L 1 Adaptive Control on 120-kg-Class Electric Vertical Take-Off and Landing Vehicles

Research on Aerodynamic Test Validation and the Vector Force Control Method for an E-STOL Fan Wing Unmanned Aerial Vehicle

Optimization of aerodynamic drag reduction for vehicles with non-smooth surfaces and research on aerodynamic characteristics under crosswind

Landing Control Scheme of Vertical Takeoff and Landing Fixed-wing UAV

Civil Aircraft Passenger-to-Freighter Main Cargo Compartment lining Validation Technology

Ground Strength Test Technique of Variable-Camber Wing Leading Edge