Abstract:The recycling of spent lithium-ion batteries has gained increasing attention due to its economic and environmental benefits. The oxidizing roasting has been preliminarily proven to be a feasible method to pre-treat and recycle spent LiFePO 4 battery. However, the kinetics and thermal conversion mechanism of spent LiFePO 4 battery during oxidizing roasting process remains indefinable and needs to be elucidated. Therefore, the kinetic analysis and thermal conversion mechanism of the spent LiFePO 4 battery during the oxidizing roasting process were investigated in this study. The results indicated that the oxidizing roasting process of the electrode materials (LiFePO 4 and C) could be divided into four weight loss stages, and the maximum weight loss took place in the third weight loss stage (500–800 °C). The model-free methods (Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose models) could well describe the oxidizing roasting process, and the corresponding E α obtained were 257.38 and 255.35 kJ/mol respectively. The model-fitting methods showed that the three-dimension diffusion model was the most suitable kinetic reaction model for the electrode materials oxidizing roasting process. The graphite in the electrode materials could be easily oxidized to CO 2 (the major gaseous product). Besides, the LiFePO 4 was firstly oxidized and converted into Li 3 Fe 2 (PO 4 ) 3 and Fe 2 O 3 . Then the Li 3 Fe 2 (PO 4 ) 3 was decomposed into Li 3 PO 4 and P 2 O 5 . Finally, P 2 O 5 could react with Fe 2 O 3 to form FePO 4 . The physical state of oxidizing roasting products changed from powder to molten state from 600 to 800 °C because of the lower melting point temperature of Li 3 Fe 2 (PO 4 ) 3 , and the oxidizing roasting temperature was suggested to be controlled below 800 °C. The final products obtained from the oxidizing roasting process of the spent LiFePO 4 battery electrode materials were Li 3 Fe 2 (PO 4 ) 3 , FePO 4 and Li 3 PO 4 . This study provides a comprehensive understanding of the kinetics and thermal conversion mechanism during spent LiFePO 4 battery oxidizing roasting recovery process.

Recycling of spent LiFePO 4 batteries by oxidizing roasting: Kinetic analysis and thermal conversion mechanism

NaOH-assisted low-temperature roasting to recover spent LiFePO4 batteries

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

Recovery and regeneration of LiFePO4 from spent lithium-ion batteries via a novel pretreatment process

Gas-phase Oxidation Modification Strategy of Spent Graphite from Spent LiFePO4 with Enhanced Initial Coulombic Efficiency for Lithium-Ion Battery Anodes

Study on Metal Recovery Process and Kinetics of Oxidative Leaching from Spent LiFePO4 Li-batteries

Recovery of LiFePO4 from used lithium-ion batteries by sodium-bisulphate-assisted roasting

Application of Roasting Flotation Technology to Enrich Valuable Metals from Spent LiFePO Batteries.

Spent lithium-ion battery recycling: Process optimization and carbon footprint analysis based on thermal mechanical force

Pyrolysis kinetics and reaction mechanism of the electrode materials during the spent LiCoO2 batteries recovery process

Enabling the sustainable recycling of LiFePO 4 from spent lithium-ion batteries

Recovery of lithium iron phosphate batteries through electrochemical oxidation in Na2CO3 solutions

Separation of Graphites and Cathode Materials from Spent Lithium-Ion Batteries Using Roasting–Froth Flotation

Study on Pyrolysis Pretreatment Characteristics of Spent Lithium-Ion Batteries

Magnetization roasting combined with multi-stage extraction for selective recovery of lithium from spent lithium-ion batteries

High Electrochemical Performance Recycling Spent LiFePO 4 Materials through the Preoxidation Regeneration Strategy

A Novel Low-Temperature Fluorination Roasting Mechanism Investigation of Regenerated Spent Anode Graphite via TG-IR Analysis and Kinetic Modeling

Oxygen-free Roasting to Recycle Cobalt from Electrode Materials of Waste Lithium Ion Batteries

A method for recovering Li3PO4 from spent lithium iron phosphate cathode material through high-temperature activation

Regeneration and Performance of LiFePO4 with Li2CO3 and FePO4 As Raw Materials Recovered from Spent LiFePO4 Batteries

Recycling of valuable metals from spent lithium-ion batteries by self-supplied reductant roasting