Abstract:The study investigates the impact of electrodeposited zinc (Zn), tin (Sn), and lead (Pb) on carbon fibers (CF) and pristine CF, as opposed to the traditionally used polypropylene (PP) fibers, on the negative plates of lead acid batteries. Although cells with pristine‐CF and CF/Zn showed the best cyclic performance, they exhibited increased water loss, leading to higher acidity. Conversely, CF/Sn and CF/Cu/Pb additions reduced gassing but resulted in acid stratification during charge/discharge, leading to lower cycle performance. Overall, using CF or metal‐modified CF instead of PP fibers increased the number of charge‐discharge cycles by at least 23 cycles. The enhancement of battery performance becomes one of the crucial points of the current research. In this study, the effect of zinc (Zn), tin (Sn), and lead (Pb) electrodeposited on carbon fibers (CF), and pristine‐CF on the negative plates of the lead acid batteries are investigated instead of the traditionally used polypropylene (PP) fibers as additives. The morphological and structural properties of the samples were characterized by scanning electron microscopy (SEM) and X‐ray diffraction spectroscopy (XRD). The electrochemical performance of the 2 V/30 Ah enhanced flooded cells were prepared and tested. The 50 % depth of discharge (DoD) cycles were carried out. Constant charging processes were applied at 60 °C for 42 days for water consumption tests. Although the best cyclic performances were recorded from the cells with pristine‐CF and CF/Zn, due to enhanced water‐loss in those samples, acidity was increased. On the other hand, with the addition of CF/Sn and CF/Cu/Pb, gassing is reduced resulting in acid stratification during charge/discharge process leading to lower cycle performance, eventually. Overall, using CF or metal modified CF instead of PP fibers enhances the number of charge‐discharge cycle by at least 23 cycles.

Physiochemical properties of positive deposits in the lead fluoroborate flow batteries with tartaric acid additive

The critical role of boric acid as electrolyte additive on the electrochemical performance of lead-acid battery

Phosphoric Acid Activation of Titanium-Supported Lead Dioxide Electrodes for Bipolar Battery Applications

Tartaric acid as a novel additive for approaching high-performance capacity retention in zinc-ion battery

Mitigating Performance Degradation of High-Capacity Lithium-Ion Cells with Boronate-Based Electrolyte Additives

Achieving High Performances of Lead-Carbon Battery with MnO2 Positive Additive

A Review of the Positive Electrode Additives in Lead-Acid Batteries

Achieving high performances of lead-carbon battery with MnO 2 positive additive

Effect of formic acid as an electrolyte additive on the performance of a 2-V lead-acid cell

Positive Electrode Passivation by LiDFOB Electrolyte Additive in High-Capacity Lithium-Ion Cells

Deposition Behavior of Lead in Lead Methanesulfonate Flow Batteries with the Addition of Tin(II) Methanesulfonate

Surface modification using heptafluorobutyric acid to produce highly stable Li metal anodes

Metal Electrodeposited on Carbon Fibers as Lead Acid Battery Additives: An Investigation on the Battery Cycle Performance

A Fluorine Rich Borate Ionic Additive Enabling High-Voltage Li Metal Batteries

Effect of sucrose-based carbon foams as negative electrode additive on the performance of lead-acid batteries under high-rate partial-state-of-charge condition

Triphenyl Borate as an Effective Film-Modification Additive for Regulating the Solid Electrolyte Interphase Formed on Graphite and Silicon Based Anode

Insight into self-discharge of layered lithium-rich oxide cathode in carbonate-based electrolytes with and without additive

Intercalation Behavior of Tetrafluoroborate Anion in a Graphite Electrode from Mixed Cyclic Carbonates

Enhanced Aluminium Passivation properties of lithium nonafluoro-tert-butoxide: Designing Electrolyte Additives for High-Voltage 4.8 V LiNi0.5Mn1.5O4-graphite batteries

Elucidating the Effect of Borate Additive in High‐Voltage Electrolyte for Li‐Rich Layered Oxide Materials