Abstract:Ni-rich layered oxides (LiNixMnyCozO2, x >= 0.6, x + y + z = 1) are promising positive electrode materials for high energy density lithium-ion batteries thanks to their high specific capacity. However, large-scale application of Ni-rich layered oxides is hindered by its poor structural and interfacial stability, especially during cycling at a high cutoff potential (i.e., >= 4.3 V, versus Li+/ Li). Herein, we demonstrate that lithium difluoro(oxalato)borate (LiDFOB) as a film-forming additive plays a dual role on the electrodelelectrolyte interphase formation in a Li-Ni0.83Mn0.05Co0.12O2 parallel to graphite cell, meaning that it can not only be reduced on the graphite negative electrode but also oxidized on the nickel-rich oxide LiNi0.83Mn0.05Co0.12O2 positive electrode cycled at a high cutoff potential (4.4 V, versus Li + /Li) prior to typical carbonate-based electrolyte constituents. As a result, the addition of 1.5 wt % LiDFOB greatly reduces the polarization and improves the cycling stability of the LiNi0.83Mn0.05Co0.12O2 parallel to graphite cell, which shows a high discharge capacity of 198 mA h g(-1), and more than 83.1% of the initial capacity was retained after 200 cycles at C/3 (the capacity retention obtained at the same cycling condition is only 59.9% for the cell without LiDFOB additive). Furthermore, the employ of LiDFOB additive also significantly suppresses the self-discharge of the LiNi0.83Mn0.05Co0.12O2 parallel to Li cell during high-temperature and long-term room- temperature storage at 4.4 V. These electrochemical performance enhancements could be attributed to the participation of LiDFOB in forming a stable and Li+ transfer favorable protective layer that is rich in inorganic boron, fluorine, and carbonate compounds on both the surface of the LiNi0.83Mn0.05Co0.12O2 positive electrode and the graphite negative electrode, thus suppressing the electrolyte decomposition on the positive electrode and negative electrode surfaces and decreasing the dissolution of transition-metal ions from the positive electrode bulk.

Mitigating Performance Degradation of High-Capacity Lithium-Ion Cells with Boronate-Based Electrolyte Additives

Electrolyte Additive Combinations That Enhance Performance of High-Capacity Li1.2Ni0.15Mn0.55Co0.1O2–graphite Cells

Positive Electrode Passivation by LiDFOB Electrolyte Additive in High-Capacity Lithium-Ion Cells

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

A Comparative Study of Pyridine-Boron Trifluoride, Pyrazine-(BF3)2 and Triazine-(BF3)3 as Electrolyte Additives for Lithium-Ion Cells

A Fluorine Rich Borate Ionic Additive Enabling High-Voltage Li Metal Batteries

Perfluoroalkyl-substituted Ethylene Carbonates: Novel Electrolyte Additives for High-Voltage Lithium-Ion Batteries

Boron additive passivated carbonate electrolytes for stable cycling of 5 V lithium–metal batteries

Lithium difluoro(oxalate)borate as an efficient and multifunctional additive for extended cycling life of LiFePO4 cathodes

Enhancing the Cycling Stability for Lithium-Metal Batteries by Localized High-Concentration Electrolytes with 2-Fluoropyridine Additive

Enhancement of high voltage cycling performance and thermal stability of LiNi 1/3 Co 1/3 Mn 1/3 O 2 cathode by use of boron-based additives

Enhanced High-Voltage Cyclability of LiNi0.5Co0.2Mn0.3O2-based Pouch Cells Via Lithium Difluorophosphate Introducing As Electrolyte Additive

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

Additives strategies to improving cycling stability of Li metal batteries by modifying electrode electrolyte interphases

Elucidating the Effect of Borate Additive in High‐Voltage Electrolyte for Li‐Rich Layered Oxide Materials

Rational Design of Benzo‐Crown Ether Electrolyte Additives for High‐Performance Li‐O2 Batteries

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Lithium Difluorophosphate As a Promising Electrolyte Lithium Additive for High-Voltage Lithium-Ion Batteries

Insights into the Dual Role of Lithium Difluoro(oxalato)borate Additive in Improving the Electrochemical Performance of NMC811Graphite Cells

Efficiently suppressing oxygen evolution in high voltage graphite/NCM pouch cell with tributyl borate as electrolyte additive