Abstract:The study investigates the impact of electrodeposited zinc (Zn), tin (Sn), and lead (Pb) on carbon fibers (CF) and pristine CF, as opposed to the traditionally used polypropylene (PP) fibers, on the negative plates of lead acid batteries. Although cells with pristine‐CF and CF/Zn showed the best cyclic performance, they exhibited increased water loss, leading to higher acidity. Conversely, CF/Sn and CF/Cu/Pb additions reduced gassing but resulted in acid stratification during charge/discharge, leading to lower cycle performance. Overall, using CF or metal‐modified CF instead of PP fibers increased the number of charge‐discharge cycles by at least 23 cycles. The enhancement of battery performance becomes one of the crucial points of the current research. In this study, the effect of zinc (Zn), tin (Sn), and lead (Pb) electrodeposited on carbon fibers (CF), and pristine‐CF on the negative plates of the lead acid batteries are investigated instead of the traditionally used polypropylene (PP) fibers as additives. The morphological and structural properties of the samples were characterized by scanning electron microscopy (SEM) and X‐ray diffraction spectroscopy (XRD). The electrochemical performance of the 2 V/30 Ah enhanced flooded cells were prepared and tested. The 50 % depth of discharge (DoD) cycles were carried out. Constant charging processes were applied at 60 °C for 42 days for water consumption tests. Although the best cyclic performances were recorded from the cells with pristine‐CF and CF/Zn, due to enhanced water‐loss in those samples, acidity was increased. On the other hand, with the addition of CF/Sn and CF/Cu/Pb, gassing is reduced resulting in acid stratification during charge/discharge process leading to lower cycle performance, eventually. Overall, using CF or metal modified CF instead of PP fibers enhances the number of charge‐discharge cycle by at least 23 cycles.

Effect of sucrose-based carbon foams as negative electrode additive on the performance of lead-acid batteries under high-rate partial-state-of-charge condition

Effect of carbon-foam composite-coated electrode on the power storage performance of soluble lead flow batteries

Enhanced cycle performance and lifetime estimation of lead-acid batteries

Enhancing Cycle Performance of Lead-Carbon Battery Anodes by Lead-Doped Porous Carbon Composite and Graphite Additives

Effects of additives on the discharge behaviour of positive electrodes in lead/acid batteries

The critical role of aluminum sulfate as electrolyte additive on the electrochemical performance of lead-acid battery

Using silkworm excrement and spent lead paste to prepare additives for improving the cycle life of lead-acid batteries

Addition of activated carbon fiber in the negative plate of lead-acid battery: Effect on the electrochemical and electrical performance

A New Nano Lead-Doped Mesoporous Carbon Composite As Negative Electrode Additives for Ultralong-Cyclability Lead-Carbon Batteries

A Layered-Carbon/pbso4 Composite As a New Additive for Negative Active Material of Lead-Acid Batteries

Carbon thermal shock assisted activated carbon for lead carbon batteries: Uniform loading of lead nanoparticles and pore regulation

Preparation of NH4Cl-Modified Carbon Materials via High-Temperature Calcination and Their Application in the Negative Electrode of Lead-Carbon Batteries

Enhanced Performance of Li|LiFePO4 Cells Using CsPF6 As an Electrolyte Additive

Effects of Electrochemically Active Carbon and Indium (III) Oxide in Negative Plates on Cycle Performance of Valve-Regulated Lead-Acid Batteries During High-Rate Partial-State-of-charge Operation

Extending the Cycling Life of Lithium–Ion Batteries with Silicon/Graphite Composite Anodes by Automatic External Stress Regulation

Modifying CF0.75 Cathode by Ultrathin Carbon Layer to Boosts Electrons Transmission and Discharge Capacity for Lithium/fluorinated Graphite Primary Batteries

A Hollow Carbon Foam With Ultra-High Sulfur Loading For An Integrated Cathode Of Lithium-Sulfur Batteries

Metal Electrodeposited on Carbon Fibers as Lead Acid Battery Additives: An Investigation on the Battery Cycle Performance

Bifunctional Additive: Lead Dioxide Nanoparticle-Doped Graphene Oxide Composites for the Preparation and Performance Study of Positive Electrodes in Lead-Carbon Batteries

In-situ synthesis of novel nanostructured Pb@C composites for improving the performance of lead-acid batteries under high-rate partial-state-of-charge operation

Nafion Coated Sulfur–carbon Electrode for High Performance Lithium–sulfur Batteries