Abstract:Interest in solid-state sodium-ion batteries (SSIBs) have resurged remarkably as a means of diversification in energy storage devices to address climate issues and further propelled by the movement of ‘Beyond-Li’. State of the art SSIBs not only offer energy security and sustainability but also comparable power and energy densities to their counter-parts. Yet to fully capitalise on the technology, the fundamental processes taking place between the anode and interface or ‘point of contact’ needs to be understood. Previous iterations of SSIBs have employed various solid-electrolyte candidates – most notable being beta-alumina – however with the recent advancements in synthesis and dopants more prominent solid-electrolytes have become interesting, one in particular being NaSICON (Sodium Super Ionic Conductor). NaSICON has several advantages, one of which is the reduction in operating temperatures of SSIBs due to its inherent fast sodium-ion transport 1 . This would broaden the potential applications of SSIBs, making the technology more accessible to a wider range of markets. Current perspectives on NaSICON solid-electrolytes have focused on optimising conductivity through means of additive dopants 2 and synthesis procedures 3 . Yet at present, the understanding of the fundamentals of interfacial inhomogeneities that affect the performance of these materials in SSIBs is limited. With consideration of the direct implications on performance that surface chemistry has, understanding of this is paramount. Evaluation of the chemical evolution of the Na metal/NaSICON interface has been achieved through assessing the changes of the chemical landscape that take place at the surface and near-surface, through surface characterisation techniques that probe the area of interest at varying depths – X-Ray Photoelectron Spectroscopy (XPS) and Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS). This has been conducted on samples that have been electrochemically cycled and comparison made to samples in pristine condition. The compositions used to conduct this investigation are Na 3 Zr 2 Si 2 PO 12 and Na 3.4 Zr 2 Si 2.4 P 0.6 O 12 – the latter of which has been shown to have one of the highest room temperature sodium-ion conductivity 4 . Through this, the electronic structure, and hence chemical state, can be deduced alongside a 3D chemical map that will correlate surface chemical changes with electrochemical performance. Thus, a preliminary means of understanding the fundamentals of chemical evolution can be established. References Lu, G. Xia, J. P. Lemmon, Z. Yang, ‘Advanced materials for sodium-beta alumina batteries: Status, challenges and perspectives’, Journal of Power Sources , Vol. 195, p. 2431-2442, 2010. Samiee, B. Radhakrishnan, Z. Rice, Z. Deng, Y. Meng, S. Ong, J. Luo, ‘Divalent-doped Na3Zr2Si2PO12 natrium superionic conductor: Improving the ionic conductivity via simultaneously optimizing the phase and chemistry of the primary and secondary phases ’, Journal of Power Sources , Vol. 347, p. 229-237, 2017. Jalalian-Khakshour, C. Phillips, L. Jackson, T. Dunlop, S. Margadonna, D. Deganello, ‘Solid-state synthesis of NASICON (Na3Zr2Si2PO12) using nanoparticle precursors for optimisation of ionic conductivity ’, Journal of Materials Science , Vol. 55, 2020. Ma, C-L. Tsai, X-K. Wei, M. Heggen, F. Tietz, J. T. S. Irvine, ‘Room temperature demonstration of a sodium superionic conductor with grain conductivity in excess of 0.01 S cm−1 and its primary applications in symmetric battery cells ’ J. Mater. Chem. A , Vol. 7, p. 7766-7776, 2019.

One‐Pot Direct Mechanochemical Silicon Replacement of Sodium Fluorosilicate into Sodium Fluorozirconate and Functionalization of Graphite for Enhanced Sodium‐Ion Storage (Small 44/2024)

One‐Pot Direct Mechanochemical Silicon Replacement of Sodium Fluorosilicate into Sodium Fluorozirconate and Functionalization of Graphite for Enhanced Sodium‐Ion Storage

In Situ Atomic-Scale Imaging of Electrochemical Lithiation in Silicon.

In Operando Mechanism Analysis on Nanocrystalline Silicon Anode Material for Reversible and Ultrafast Sodium Storage.

Sodium Storage: Controlled SnO2 Crystallinity Effectively Dominating Sodium Storage Performance (adv. Energy Mater. 10/2016)

Direct Superassemblies of Freestanding Metal-Carbon Frameworks Featuring Reversible Crystalline-Phase Transformation for Electrochemical Sodium Storage.

Probing the Dynamic Na Metal/Nasicon Interface in Sodium-Ion Batteries

Sonochemically Prepared Nanodot Magnesium Fluoride‐Based Anodeless Carbon Substrate for Simultaneously Reinforcing Interphasial and Reaction Kinetics for Sulfide‐Based All‐Solid‐State Batteries (Adv. Energy Mater. 45/2024)

Bimetallic Sulfide Sb2S3/FeS2 Heterostructure Anchored in a Carbon Skeleton for Fast and Stable Sodium Storage

In Situ Phase Transformation to form MoO3−MoS2 Heterostructure with Enhanced Printable Sodium Ion Storage (Adv. Funct. Mater. 29/2024)

Carbon-Free Conversion of SiO 2 to Si via Ultra-Rapid Alloy Formation: Toward the Sustainable Fabrication of Nanoporous Si for Lithium-Ion Batteries

Characteristics of Nano-Structured SFM Infiltrated Onto YSZ Backbone for Symmetrical and Reversible Solid Oxide Cells

(Invited) Revisiting the Structure–Property Relationships in NaSICON Electrode and Electrolytes

Small Molecule‐Assisted Thermal Radiation Synthesis of Super‐Sb Toward Ultrafast and Ultrastable Sodium Storage

Initiating Fluorine Chemistry in Polycyclic Aromatic Hydrocarbon-Derived Carbon for New Cluster-Mode Na Storage with Superhigh Capacity

Liquid Metal Mediated Heterostructure Fluoride Solid Electrolytes of High Conductivity and Air Stability for Sustainable Na Metal Batteries

Aluminothermic Reduction Enabled Synthesis of Silicon Hollow Microspheres from Commercialized Silica Nanoparticles for Superior Lithium Storage

Introducing Hybrid Defects of Silicon Doping and Oxygen Vacancies into MOF-Derived TiO2-X @Carbon Nanotablets Toward High-Performance Sodium-Ion Storage.

Sodium‐Ion Batteries: Sb Nanoparticles Encapsulated in a Reticular Amorphous Carbon Network for Enhanced Sodium Storage (small 40/2015)

A Monolithic Solid-State Sodium–Sulfur Battery with Al-Doped Na 3.4 Zr 2 (Si 0.8 P 0.2 O 4 ) 3 Electrolyte

Metal‐Organic Framework‐Based Materials for Advanced Sodium Storage: Development and Anticipation