Abstract:A solution‐based process is developed for the surface engineering of LLZT, the sol–gel process utilizing magnesium trifluoroacetate and poly(acrylic acid). Through a spin‐coating treatment and subsequent high‐temperature annealing, crack‐free MgF2 nanofilms are formed. The MgF2 interlayer transforms the LLZT pellet into a highly lithiophilic. Therefore, the assembled lithium symmetrical batteries can cycle for over 2400 h at 0.2 mA cm−2. Garnet‐type solid‐state electrolytes (SSEs) exemplified by Li6.5La3Zr1.5Ta0.5O12 (LLZT) are chemically unstable when exposed to air, leading to the formation of impurities and poor wettability with Li metal. Herein, a protocol to address this Li/LLZT interface challenge is demonstrated by constructing a lithiophilic MgF2 nanofilm on the LLZT pellet. Specifically, a solution‐based process is developed for the surface engineering of LLZT, utilizing magnesium trifluoroacetate (MTF) as the molecular precursor while poly(acrylic acid) (PAA) as the coordinating agent in a sol‐gel process. It is demonstrated that a facile spin‐coating treatment followed by high‐temperature annealing reliably forms crack‐free MgF2 nanofilms with precise thickness control. Introduction an MgF2 interlayer transforms the LLZT pellet into a highly lithophilic, facilitating close contact with the lithium anode, thereby leading to a significantly reduced interfacial resistance from 1190 Ω cm2 to 6 Ω cm2. Such an interfacial engineering enables stable cycling of full batteries with high reversibility and rate capability using commercial LiFePO4 and LiNi0.83Co0.07Mn0.1O2 as cathodes. This study unfolds the possibility of a solution‐based method as a facile and scalable process for the construction of fluoride nanofilms, which is promising to address the critical interfacial challenges of solid‐state batteries (SSBs) to facilitate its practical applications.

Sonochemically Prepared Nanodot Magnesium Fluoride‐Based Anodeless Carbon Substrate for Simultaneously Reinforcing Interphasial and Reaction Kinetics for Sulfide‐Based All‐Solid‐State Batteries (Adv. Energy Mater. 45/2024)

Ionic Liquid Reinforced NaSICON-type Oxide Electrolyte Films Enabling Solid State Conversion Metal Fluoride-Lithium Batteries

Sonochemically Prepared Nanodot Magnesium Fluoride‐Based Anodeless Carbon Substrate for Simultaneously Reinforcing Interphasial and Reaction Kinetics for Sulfide‐Based All‐Solid‐State Batteries

Design of Composite Cathodes for Sulfide-Based All-Solid-state Batteries

Manipulating Hardness to Construct Favorable Electrode Microstructures for All‐Solid‐State Batteries (Adv. Energy Mater. 42/2024)

Synchrotron Radiation Spectroscopic Studies of Mg <sup>2+</sup> Storage Mechanisms in High‐Performance Rechargeable Magnesium Batteries with Co‐Doped FeS <sub>2</sub> Cathodes (Adv. Energy Mater. 38/2022)

Design Zwitterionic Amorphous Conjugated Micro‐/Mesoporous Polymer Assembled Nanotentacle as Highly Efficient Sulfur Electrocatalyst for Lithium‐Sulfur Batteries (Adv. Energy Mater. 40/2021)

In Situ Construction of a LiF-Enriched Interfacial Modification Layer for Stable All-Solid-State Batteries

Room‐Temperature Anode‐less All‐Solid‐State Batteries via the Conversion Reaction of Metal Fluorides

Rationally Designed Solution-Processible Conductive Carbon Additive Coating for Sulfide-based All-Solid-State Batteries

Magnesium Fluoride Interlayers Enabled by Wet‐Chemical Process for High‐Performance Solid‐State Batteries

Interfacial‐Catalysis‐Enabled Layered and Inorganic‐Rich SEI on Hard Carbon Anodes in Ester Electrolytes for Sodium‐Ion Batteries (Adv. Mater. 29/2023)

Micromechanism in All-Solid-State Alloy-Metal Batteries: Regulating Homogeneous Lithium Precipitation and Flexible Solid Electrolyte Interphase Evolution

Biphasic Fe7S8@MnS Heterostructure Embedded in Sulfur-Doped Carbon Matrix As Anode for Li-ion Batteries

Molten Guest‐Mediated Metal‐Organic Frameworks Featuring Multi‐Modal Supramolecular Interaction Sites for Flame‐Retardant Superionic Conductor in All‐Solid‐State Batteries

Li–S Full Batteries: Rational Design of Multifunctional Integrated Host Configuration with Lithiophilicity‐Sulfiphilicity toward High‐Performance Li–S Full Batteries (Adv. Funct. Mater. 3/2021)

Alleviating the self-discharge and enhancing the polysulphides conversion kinetics with LaCO3OH nanocrystals decorated hierarchical porous carbon

Molecular Engineering toward Robust Solid Electrolyte Interphase for Lithium Metal Batteries (Adv. Mater. 14/2024)

Solid Electrolytes: A Garnet‐Type Solid‐Electrolyte‐Based Molten Lithium−Molybdenum−Iron(II) Chloride Battery with Advanced Reaction Mechanism (Adv. Mater. 32/2020)

Design Strategies, Practical Considerations, and New Solution Processes of Sulfide Solid Electrolytes for All‐Solid‐State Batteries

Synthesis of Iron Sulfide Nanocrystals Encapsulated in Highly Porous Carbon‐Coated CNT Microsphere as Anode Materials for Sodium‐Ion Batteries (Small 7/2024)