Abstract:Failure response of the modern high strength steel grades shows a diverse pattern compared to the conventional highly ductile steels. In automotive sheet forming applications of the high strength steels, fracture could be observed prior to necking or the post necking deformation is very limited. The differences in the underlying damage mechanisms contribute to the different ways of damage development and the interaction of damage with plastic localization and strain hardening creates various failure patterns. Therefore, it is critical to clearly identify the phase for damage initiation and understand the relation between plastic localization, damage and fracture, as these patterns significantly influence the safety assessment in the forming process of steels. Inverse modelling approaches are being used to bridge the gap between experiments and numerical simulations. However, this technique shows significant discrepancies when strain heterogeneity is experienced, especially since the determination of the material parameters is based on comparison on a global scale with force and elongation measurements. An iterative finite element model update (FEMU) procedure integrated with optical full field measurement technique was executed which extended the possibilities to identify the material ductile damage and fracture behavior on a local level with significantly higher accuracy. To identify the material plastic and damage behavior of the automotive dual phase steel (DP-K1000) under study, experiments are conducted on dog-bone, notched tensile, central hole and shear specimens at various strain rates. Full field deformation data was obtained by digital image correlation (DIC). A vigorous and general framework for the inverse identification of the strain hardening behavior up to fracture of the automotive high strength steel was studied. A hybrid damage mechanics model (extended Modified Bai-Wierzbicki) that combines a phenomenological criterion for damage initiation related to the microstructure degradation of materials and a continuum damage mechanics based damage evolution law for progressive damage accumulation till final fracture is employed using a VUMAT in the finite element (FE) scheme. To exclude the convergence (plastic instability) problems, a displacement driven finite element simulation was used while minimizing the discrepancy between the experimental and numerical surface strain fields and force values. A visual mapping procedure was adopted to realize identical reference frames and therefore identical peripheries for the specimen in DIC and FE model. This mapping includes a transformation and interpolation function from FE results to the DIC datum points. Successful identification of the material parameters was achieved based on a combined Gauss-Newton and Levenberg-Marquardt algorithm which require the evaluation of the gradient of the objective function to update the unknown parameters in an appropriate direction. The optimization problem of the inverse modelling in the current work was described by a cost function based on the least square norm of the differences of the surface strain fields. Overall cost function formulation is not dependent on the experimental or finite element meshes and includes rigid body motions. The residual was minimized at once for all the displacements by Gauss-Newton scheme in space-time, which is defined by spatial domain and temporal domain. The optimization of the constitutive parameters was directly achieved by minimizing this image residual in an iterative manner. The adopted methodology helped in determining macroscopic crack initiation instant and location from experiments. Local variables such as equivalent plastic strain, stress triaxiality and Lode angle parameter were evaluated from the critical element for the determination of the damage initiation locus which was then fitted by a non-linear least squares method with a trust-region algorithm in Matlab. The identified damage initiation locus and plastic localization phenomena served as an evaluation criteria for the formability of the dual phase automotive steel.

Mapping the defect acceptance for dynamically loaded components by exploiting DIC-based full-field receptances

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

An Internal Digital Image Correlation Technique for High-Strain Rate Dynamic Experiments

FULL-FIELD DYNAMIC MEASUREMENT METHOD FOR FATIGUE CRACKS BASED ON DECORRELATION DIC

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

Revealing plastic localization and ductile damage initiation features with integrated DIC and FEM

Automatic Crack Tip Localization in Enormous DIC Images to In-Situ Characterize High-Temperature Fatigue Crack Growth Behavior

Deformation Fields Measurement of Crack Tip under High-Frequency Resonant Loading Using a Novel Hybrid Image Processing Method

DIC application for damage detection in FRP composite specimens based on an example of a shearing test

Non-contact strain measurement to eliminate strain gages in vibration-based high cycle fatigue testing

Full-Field Indentation Damage Measurement Using Digital Image Correlation

Advancements in Constitutive Model Calibration: Leveraging the Power of Full-Field DIC Measurements and In-Situ Load Path Selection for Reliable Parameter Inference

Shape sensing and damage identification with iFEM on a composite structure subjected to impact damage and non-trivial boundary conditions

Exploring high-frequency eddy-current testing for sub-aperture defect characterisation using parametric-manifold mapping

Validation of Finite-Element Plasticity Models Using Full-Field Surface Strain Measurements

Metrics to evaluate constitutive model fitness based on DIC experiments

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

Dynamic digital image correlation method for rolling convective contact

A Vision‐based Surface Displacement/strain Measurement Technique Based on Robust Edge‐enhanced Transform and Algorithms for High Spatial Resolution

Application of Digital Image Correlation for Strain Mapping of Structural Elements and Materials

A Fuzzy Similarity-Based Approach to Classify Numerically Simulated and Experimentally Detected Carbon Fiber-Reinforced Polymer Plate Defects