Abstract:We discuss here a solution-processed thin film of antimony trisulphide (Sb2S3; band gap ≈ 1.7 eV; electronic configuration: ns2np0) for applications in planar heterojunction (PHJ) solar cells. An alternative solution processing method involving a single-metal organic precursor, viz., metal-butyldithiocarbamic acid complex, is used to grow the thin films of Sb2S3. Because of excess sulphide in the metal complex, the formation of any oxide is nearly retarded. Sb2S3 additionally displays structural anisotropy with a ribbon-like structure along the [001] direction. These ribbon-like structures, if optimally oriented with respect to the electron transport layer (ETL)/glass substrate, can be beneficial for light-harvesting and charge-transport properties. A PHJ solar cell is fabricated comprising Sb2S3 as the light absorber and CdS as an ETL coated on to FTO. With varying film sintering temperature and thickness, the typical ribbon-like structures predominantly with planes hkl: l = 0 stacked horizontally along with respect to CdS/FTO are obtained. The morphology of the films is observed to be a function of the sintering temperature, with higher sintering temperatures yielding compact and smooth films with large-sized grains. Maximum photon to electricity efficiency of 2.38 is obtained for PHJ solar cells comprising 480 nm thick films of Sb2S3 sintered at 350 °C having a grain size of few micrometers (>5 μm). The study convincingly shows that improper grain orientation, which may lead to nonoptimal alignments of the intrinsic structure with regard to the ETL/glass substrate, is not the sole parameter for determining photovoltaics performance. Other solution-processing parameters can still be suitably chosen to generate films with optimum morphology, leading to high photon to electricity efficiency.

Solution-Processed Sb 2 S 3 -Based Heterojunction for Self-Powered Broad Band Weak Light Detection

Interfacial Engineering of High-Performance, Solution-Processed Sb 2 S 3 Phototransistors

Solution-processed bismuth sulfide incorporated with zinc for high-gain and low-noise photodetection

Self-Powered Sb<sub>2</sub>S<sub>3</sub> Thin-Film Photodetectors with High Detectivity for Weak Light Signal Detection

Self-Powered Sb2S3 Thin-Film Photodetectors with High Detectivity for Weak Light Signal Detection.

Solution‐Processed Tin‐Antimony Quaternary Chalcohalides for Self‐Powered Broadband Photodetectors

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

Solution‐Processed AgSbS2 Thin Films for Photodetection

Wafer-Scale Growth of Sb2Te3 Films via Low-Temperature ALD for Self-Powered Photodetector

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub> Thin Film Prepared via Magnetron Sputtering

Solution-processed ZnBi2S4 polycrystalline thin films for low noise photodetection

All solution-processed SnO 2 /1D-CsAg 2 I 3 heterojunction for high-sensitivity self-powered visible-blind UV photodetector

High-Gain Low-Noise Phototransistors Based on Solution-Processed Bi2S3

Sb2S3/Sb2Se3 heterojunction for high-performance photodetection and hydrogen production

Self-powered and broadband flexible photodetectors based on vapor deposition grown antimony film

Solution‐Processed Antimony Selenide Heterojunction Solar Cells

Sensitive solution-processed Bi2S3 nanocrystalline photodetectors

Solution-processed Sb2-xBixS3 Thick Junctions for Stable, Low-Noise, and Sensitive X-ray Detection

Planar Heterojunction Solar Cell Employing a Single-Source Precursor Solution-Processed Sb2S3 Thin Film as the Light Absorber

Facile synthesized Sb 2 S 3 based high-performance visible photodetector for weak optical signal detection