Abstract:Metal halide perovskites have emerged as next-generation semiconductors for X-ray detection because of their excellent photoelectric properties. However, severe ion migration in three-dimensional (3D) halide perovskites usually causes dark current drift in radiation detectors, especially in high electric fields. Here, we report a liquid-phase epitaxial method based on inverse-temperature crystallization (ITC), with which a hybrid/all-inorganic 3D perovskite single-crystal heterojunction is constructed, using an orientated CsPbBr3 single crystal as a substrate. MAPbBr3– n Cl n /CsPbBr3 single-crystal heterojunctions and single-crystal arrays (through the addition of a mask onto the substrate) with good lattice matching were successfully constructed, laying the foundation for high-performance X-ray detectors. In particular, the MAPbBr3/CsPbBr3 heterojunction drastically enhances the X-ray response of the CsPbBr3 single crystal, with a record-high sensitivity of 2.0 × 105 μC Gyair –1 cm–2 and lowest detection limit of 96 nGyair s–1 for 120 keV hard X-ray detection. Moreover, the dark current drift caused by ion migration is suppressed to 3.92 × 10–4 nA cm–1 s–1 V–1 even in a high reverse electric field of −125 V mm–1. Based on the superior detection performance, it is confirmed that a robust and uniform X-ray imaging detector with good resolution was successfully devised using the heterojunction. Our study provides a simple strategy for constructing perovskite single-crystal heterojunction films and arrays that effectively suppress ion migration that otherwise occurs in 3D halide perovskite single crystals to enable the creation of robust ultrasensitive X-ray detection and imaging systems.

Solution-processed Sb2-xBixS3 Thick Junctions for Stable, Low-Noise, and Sensitive X-ray Detection

Solution-processed bismuth sulfide incorporated with zinc for high-gain and low-noise photodetection

Solution-processed ZnBi2S4 polycrystalline thin films for low noise photodetection

Solution‐Processed AgSbS2 Thin Films for Photodetection

Interfacial Engineering of High-Performance, Solution-Processed Sb 2 S 3 Phototransistors

Solution-grown BiI/BiI3 van der Waals heterostructures for sensitive X-ray detection

High-Gain Low-Noise Phototransistors Based on Solution-Processed Bi2S3

Chemical bath deposition of AgBiS2 films for visible and X-ray detection

Modulating the Structure and Optoelectronic Properties of Solution-Processed Bismuth-Based Nanocrystals

One-Step Solution Synthesis of Bismuth Sulfide (bi2s3) with Various Hierarchical Architectures and Their Photoresponse Properties

Antisolvent-Assisted Synthesis of Bismuth Halide Perovskite Polycrystal Alloys for Sensitive X-ray Detection

Liquid-Phase Epitaxial Growth of Large-Area MAPbBr3–nCln/CsPbBr3 Perovskite Single-Crystal Heterojunction for Enhancing Sensitivity and Stability of X-ray Detector

Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit

Solution-Processed Sb 2 S 3 -Based Heterojunction for Self-Powered Broad Band Weak Light Detection

Liquid-Phase Epitaxial Growth of Large-Area MAPbBr 3– n Cl n /CsPbBr 3 Perovskite Single-Crystal Heterojunction for Enhancing Sensitivity and Stability of X-ray Detector

Ion-exchange-induced slow crystallization of 2D-3D perovskite thick junctions for X-ray detection and imaging

Vapor-deposited lead-free all-inorganic perovskite films with ultralow dark current for sensitive and stable X-ray detection

Enhanced Carrier Transport in X‐Ray Detector Based on Cs3Bi2I9/MXene Composite Wafers

Interlayer-Assisted Growth of Si-Based All-Inorganic Perovskite Films Via Chemical Vapor Deposition for Sensitive and Stable X-ray Detection

Low-Temperature Solution-Processed Cu2AgBiI6 Films for High Performance Photovoltaics and Photodetectors.

Sensitive solution-processed Bi2S3 nanocrystalline photodetectors