Development of antifouling nanofiltration membranes for separation of dye/salt mixture through incorporation of novel polyelectrolyte-decorated silica
Mohamadreza Nazari,Zahra Mohamadnia,Mahtab Sabeti
DOI: https://doi.org/10.1016/j.jwpe.2024.106575
IF: 7
2024-11-26
Journal of Water Process Engineering
Abstract:Various physical and chemical methods can improve hydrophilicity and prevent fouling in polyethersulfone (PES)-based nanofiltration membranes. Here, two additives containing hydrophilic polymer brushes were used to modify the hydrophilicity of PES membranes. First, the surface of mesoporous silica (MS) was modified with poly(2,3-epoxypropyl methacrylate) (P(EPMA)) and poly[2-(acryloyloxy)ethyl]trimethylammonium chloride (P(AEtMAC)) brushes using the surface-initiated atom transfer radical polymerization (SI-ATRP) method to prepare MS- g -P(EPMA-SO 3 ) and MS- g -P(AEtMAC) as additive. Various weight percentages of the additives from 0.05 to 0.2 wt% were used to fabricate PES-based membranes and by adding the polymer brushes, the hydrophilicity of PES-based membranes increased. The membrane containing 0.075 wt% of MS- g -P(AEtMAC) additive exhibited a higher water flux of 18.6 (L/m 2 .h) at 5 bars. The separation of Coomassie Brilliant Blue G-250 (CBB) and Congo Red (CR) dyes (100 mg/L) was investigated; all membranes rejected more than 99 % of both dyes. However, the PES/MS- g -P(EPMA-SO 3 ) membrane, M2, showed a rejection rate of 11.5, 6.1, and 5.1 % for Na 2 SO 4 , MgCl 2 , and NaCl, respectively. PES/MS- g -P(AEtMAC) membrane, M6, rejected Na 2 SO 4 , MgCl 2 , and NaCl at 6.2, 11.9, and 6.8 %, respectively. Finally, the constructed membranes demonstrated remarkable selectivity for dye/salt mixtures, indicating great potential for treating dye-containing wastewater.
engineering, chemical, environmental,water resources